We offer wide range of gear couplings which have facilitates high compensation of angular, parallel and axial misalignment. These are available with seal carrier and are easy to maintain. We procure gear couplings of 19 types different in size and power ratings. These are carbon steel forged / cash hubs with hardened teeth. We also offer variants of sheer pin, spacer and torsion shaft types.

Technical Detail:

• Power rating: 11.5 Kw to 12700 Kw at 100 rpm

Our traded tyre couplings are highly elastic, backlash free, absorb shocks and dampen vibrations. These are appreciated for their inherent overload protection and high misalignment capacity. Our tyre couplings are available in range of 17 sizes and in different forms as 'through bore' or with 'taper lock' bushes.

Technical details:

• Power rating: 0.22 kW to 132 KWatt 100rpm
• Spacer tyre couplings for DBSE of: 80 mm, 100 mm, 140 mm & 180 mm
• Choice of tyres: Standard, neoprene or fire resistant anti-static (FRAS)

 

We offer wide range of pin bush couplings which are simple and compact in construction. The precision engineered couplings transmit torque through high tensile steel bolts. Available in range of 26 sizes, the pin bush couplings have rubber compounds which absorb stock loads, torsion vibrations and slight misalignment.

Technical Detail:

• Power rating: 0.81 kW to 2069 kW at100 rpm

Our HRC flexible jaw couplings facilitate higher power transmission and have excellent misalignment capacity. The nitrile rubber elastomeric inserts in the couplings enables them to withstand temperatures from - 400 C to 1000 degree Celsius. Available in 8 sizes, these have power rating from 0.33 kW to 33 kW at 100 rpm.

We also offer HRC plug-in flywheel couplings which are available in plug in design for advantages of blind fitting. These are directly fits standard flywheels of IC engines of Kirloskar, Cummins, Leyland, Ruston and Perkins.

We offer wide range of resilient spring grid couplings which are torsionally flexible. The precision engineered couplings provide protection against shock load, impact load and vibration. Heat treated spring steel grid absorbs high impact shocks without loss of energy and transmits full torque with dampened vibration and reduced peak.
When overload occurs, grid fails and prevents failure of the shaft or machinery part connected to the coupling.

Technical Details:

• Two variants: Horizontally split covers & vertically split covers
• Size: 0.45kW to 1307kW per 100 rpm
• Bore: Up to 267mm

Our traded essex jaw couplings forms a flexible inserts and cater for incidental angular, parallel and axial misalignment. These absorb shock loads and dampen small amplitude vibration. Quick to install and easy to maintain, our jaw couplings are used in various applications.

Technical Details:
 

• Types: External Spider and Cushion Type
• Power rating: 0.21 kW to 22.40 K Watt 100 rpm

We procure and offer FT-type series Super Locks kind of keyless couplings. Under the action of axial force, inner-outer sleeves keep close to axis and hub. By generating frictional force these transfers torque and axial force and facilitates the operation of running. These are appreciated for strong load carrying ability, perfect centricity, easy assemble and disassemble and long service life. The Super Locks are used with axis and gears, sprockets, pulleys, large-sized airfans and marine propellers.

Our traded timing and poly V pulleys are custom built large pulleys in solid or split construction for higher power transmission. The high power rating makes the drive lighter and compact and reduces static tension and thus improves the bearing life.  Poly-V pulleys are efficient pulleys which facilitates energy saving up to 6%. These are available in standard ranges of PJ, PK, PL & PM up to 20 ribs.
 

We supply wide range of taper lock pulleys which are acknowledged for facilitating reduced static tension and improved bearing life. These have dual duty grooves which perfectly match classical V and space saver wedge belts. Our standard range of taper lock pulleys caters to drives up to 200 kW with speed ratios of 1:7. We fit 'taper lock' bushes in the pulleys to promote 'shelf to shaft' concept. We procure and offer 470 standard sizes of taper lock pulleys to cater to wide requirements of clients.

Our traded industrial chains are available in different pitches and breaking load to meet different requirements. These are available in SS material and are sturdy in design and resistant to corrosion.

• Sizes available: From half inch to 8" pitch

We offer wide range of taper lock bushes along with hubs and adaptor which facilitates easy and quick 'shrink fit' and eliminates precision taper fitting keys. These are available in the range of 16 sizes with metric and imperial bores. Our supplied taper lock bushes are highly acknowledged in the industry for their easy dismantling, maintenance and component replacement features. We also offer a range of taper lock weld-on hubs, bolt-on hubs and adaptors to extend the unique advantage of taper lock bush concept to bored components like conveyor head pulleys, fan rotors, impellers and others.

We offer qualitative helical shaft mounted speed reducers which are metric in design and are available in 12 different sizes. These have maximum torque rating up to 38,296 Nm at 10 rpm with ratios of 5:1, 13:1 & 20:1. Direct mounting on drive shaft does away with bed plates, couplings and alignment problems normally encountered in foot mounted gearboxes. Wide choice of output speeds are obtained by use of appropriate input V-Belt drive. We also offer following variants of SMSR:

• Foot Mount / Flange Mount
• Motor Mounting
• Vertical shaft Mounting
• Back stop