We provide an extensive range of hot air oven/ sterilizers in  renowned brand name . Our range is the first one in India as per ISI certification. We conduct rigorous quality control test before delivery. Mainly, these are designed to destroy Bacteria, Viruses, Fungus and Sterilize Surgical and Dental Instruments, Glass wares and others by application of dry heat at temp, ranging between 140°C to 200°C on the basis of IS 3119 quality norms. 
               
Construction
 
Our range of Ovens is well known for its sturdy, with double walled construction. Inner chamber is made of Anodized Aluminum or Highly Polished Stainless Steel. Outer chamber is made with Mild Steel Sheet duly pretreated in seven tanks process for surface treatment and are finalized with durable Powder Coated Paint. 75 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber is fabricated with ribs to adjust shelves to any convenient height. These are available with 2 or 3 removable shelves. Shelves are made of polished SS Sheet or Anodized Aluminum. Insulated door is fixed with heavy hinges with a ball catcher spring - loaded door closing device.
 

Heating Element	Our heating elements are made of supreme grade imported nichrome wire which are insulated inside the porcelain beads and are generally placed at the bottom and both side ribs for uniform temperature all over the space.
Temperature Control	In our range of temperature control, temperature is controlled by imported capillary type Thermostat. Temperature control knob of each oven is graduated in centigrade degrees after actually observing the temperature is steady state. Supplied with L-shaped prismatic glass THERMOMETER fitted on top of the Oven for reading the chamber temperature. Wide temperature 50°C to 250°C ovens for various applications.
Ventilation	There are air ventilator ports provided on both sides at top to ventilate, gases and fumes if any. pane pi lo
Control Panel	The equipment is offered with a pa having a thermostat control knob. ON/OFF switch, two indication lights and provision for fixing the TIMER.
Power Requirements	These are supplied with cord and plug. Suitable to operate on 220 V single phase, 50 Hz, AC supply.

 
These sizes are provided with air circulating fan if standard feature.
 
Optional Accessories:-
 

• Air Circulating Fan.
• Digital Display Temp. Indicator in lieu of L-Shaped Thermometer.
• Digital Display Temp. Controller-Cum-indicator in lie of thermostat & L-shaped thermometer.
• Micro processor based PID temp, controller-cum-indicator
• In lieu of thermostat & L-shaped thermometer.
• Timer

 
Spare Accessories: - L-shaped thermometer

Leveraging on our rich vendor base, we offer an extensive range of microtome to our customers. Our range has the features of precise and accurate serial sectioning, with feed setting visible from front, improved locking device -and counter balanced wheel. Light weight cover hinged at back provides for easy access to internal parts for cleaning and oiling. Feed is adjustable from 1 to 50 microns in steps of 1 micron. Free up and down movement of object clamp. Automatic restricted total excursion of 28 mm by disengaging the feed mechanism to prevent jamming.

Ball and flange object clamp provides flexible orientation of object piece. Takes specimen up to 32x27 mm on stem of block holders. Knife holder allows for 120 mm on 180 mm long knife. Cutting angle is adjustable through 30 degrees. Two levers release knife holder for resetting angles and a third lever releases the entire assembly for movement on slide way to adjust horizontal distance from object.

Latest cam system eliminates the conventional cord system for feeding, resulting in better section cutting and improved efficiency of the machine. Our range is provided with one knife 120 mm long with back and handle in wooden box, 2 block holders, one bottle of lubrication oil, rexin cover complete in all respects.

Spare Accessories :-

• Special Alloy Steel Knife, comes in size: 120 mm, 150 mm, 180 mm, 200 mm
• S.S. Back for Knife
• Block Holder/Specimen Holder, comes in size :- (Dia) 37 mm, 25 mm, 20 mm
• Embedding Moulds made of S.S.
• L-Moulds made of brass.
• Disposable Embedding Ring.

Our range is elegant and sturdy, latest range of incredibly reliable Microtomes. These are made for excellent precision and quality sectioning. Unique adjustable block holder, allowing technicians to alter the block angle for poorly embedded tissue. Rugged, sturdy construction for easy to operate, maintain and quick to clean. Complete with counter balancing wheel, automatic feed mechanism and feed release. Light aluminum cover hinged at back, protects the internal mechanism. Heavy casted base plate fitted with heavy rubber pads to provide better grip. Some of the important features of our range are as follows:  

• Smooth operation
• Extremely versatile for uniform serial sectioning adjustable from 1 to 50 microns in step of 1 micron
• Feed mechanism is independent of other movements
• Supplied complete with one knife, having back and handle in wooden box, 6 block holders, One bottle of lubricating oil and rexine cover

Spare Accessories :-

• Special Alloy Steel Knife comes in various size: - 120 mm, 150 mm, 180 mm, 200 mm  S.S. Back for Knife
• Block Holder/Specimen Holder comes in various size like - (Dia) 37 mm, 25 mm, 20 mm
• Embedding Moulds made of S.S.
• Disposable Embedding Ring.

With the support of our efficient team, we offer a qualitative range of incubators to our customers. Our range is the first one in its field to get ISI mark. Our range is meant for drying of slides, paraffin embedding, tissue culture work, incubation of antibody test, excellent for Microbiological determinations, crystallization studies and Incubation of hydroxy steroids.
 
Construction: - Our range is robust in construction with double walled construction with complete inner chamber made of anodized aluminum or highly polished stainless steel. Outer chamber is made of Mild Steel Sheet, finished with powder coated paint. 75 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber fabricated with ribs for adjusting shelves to convenient height. These are provided with 2 or 3 removable shelves. SHELVES are made of fully Anodized Aluminum Sheet or Polished Stainless Steel Sheet as per chamber. Door is insulated and fitted with heavy hinges. Door has Double glass window which facilitate inspection of samples without opening the door. Heating elements, made of high grade imported nichrome wire are put inside the porcelain beads and placed at the bottom and side ribs for uniform temperature all over the space.
 
Temperature Control: - Temperature is controlled by imported capillary type thermostat from ambient to 80°C. Temperature control knob is graduated in centigrade degrees after actually observing the temperature in steady state. An L-shaped prismatic glass Thermometer is fitted on top of the Incubator for reading the chamber temperature.
 

Ventilation	Air ventilators are provided on both sides at top to flue away any gas or fumes.
Control Panel	The equipment is provided with a pi having a thermostat control knob, ON/OFF switch and pilot lamps.
Power Requirement	Supplied with cord and plug suit to operate on 220 V single phase, 50 Hz, AC supply.

 
 
Size of inner chamber:-
 

W x H x D	No. of Shelve
300 X 300 X 300 mm	2 m
355 X 355 X 355 mm	2 ¿
455 X 455 X 455 mm	2 1
455 X 605 X 455 mm	3 |i
605 X 605 X 605 mm	3 |
605 X 910 X 455 mm	3 1
605 X 910 X 605 mm	3 ij

 
These sizes are provided with air circulating fan standard feature. Some of its optional accessories are as follows:
 

• Air Circulating Fan
• Timer
• Digital Indicator in lieu of L-shaped thermometer
• Digital Indicator - cum - Controller Electronic in 11 L-shaped thermometer and thermostat
• Micro processor based PID Temp. Controller-cum-indicator
• In lieu of thermostat & L-shaped thermometer

 

The Serological Water baths are versatile which can handle any clinical procedure, incubation, inactivation, agglutination, as well as most serological, pharmaceutical, biomedical procedure. Serological Water bath have been granted ISI mark due to its unmatched performance and quality raw material used.
 
Construction:-
 
serological water baths are sturdy, with double walled construction. Complete inner chamber made of highly polished stainless steel. Outer Chamber is made of mild steel sheet, finished with powder coated paint. Gap between the walls is filled with special grade glass wool for proper insulation to avoid heat losses. The water bath is provided with a drain plug to facilitate easy emptying and cleaning of the inner chamber whenever necessary. Test tube racks can be provided on requirement. Pyramidal shaped cover (aluminum lid) and perforated removable diffuser are standard accessories.
 

Heating Elements	Immersion heating elements made of high grade materials are fitted at bottom with different ratings for different sizes.
Temperature Control	Temperature is generally controlled by imported capillary type THERMOSTAT from ambient to 80°C ± 0.5°C. Temperature control knob is graduated in centigrade degrees.
Control Panel	The equipment is provided with a panel having a thermostat control knob, ON/OFF switch, two pilot lamps. Our range is supplied with cord and plug.
Power Requirement	Suitable to operate on 220 v, single phase, 50 Hz, AC supply

 
 
 Size of inner chamber:-
 

W x H x D	Load
300 X 250 X 150 mm for 2 racks	1 kw
330 X 300 X 150 mm for 4 racks	1.5 kw
455 X 300 X 150 mm for 6 racks	2 kw
605 X 300 X 150 mm for 8 racks	3 kw
250 X 125 X 125 mm with lid	0.5 kw

 
 
Optional Accessories:-
 

• Test Tube Rack made of Stainless Steel 3 Tier with Lift in Handle 13mm Dia 24 Hole or 16mm Dia 18 Hole
• Digital Display temp, indicator in lieu of Thermometer
• Digital Display temp, controller-cum-indicator in lieu (thermostat and thermometer)
• Microprocessor based PID temperature controller cum indicator in lieu of thermostat and thermometer

 

We offer autoclaves that are used in scientific research institutions, universities and in health services. Sterilization of dressing material, linen, surgical instruments, rubber & plastic material is done by using high pressure, electrically heated vertical steam sterilizer. Saturated steam under the pressure of 15 to 20 psi (adjustable) is also used in the sterilization.
 
Some of its important construction features are as follows:
 

• Sturdy double walled construction with boiler/inner chamber made of stainless steel of 18 SWG sheet
• Outer shell is made of mild steel finished with powder coated paint
• The boiler and outer shell is provided with air insulation
• Lid is made of SS plate and is tightened all-around by wing nuts
• Moulded, joint-less gaskets are made of Neoprene rubber

 
The sterilizer is tested hydraulically up to 40 psi. The autoclaves have water level arrangements for indicating the water position inside air/steam release cock, boiler, pressure gauge, & spring loaded safety valve. This can be set at any given point within 10 psi to 20 psi ± 3 psi and drain.
 
The steam and water are heated to the specified pressure and temperature using ISI marked immersion type heating element. The autoclaves are offered with S.S. basket, cord & plug for working on 220 Volts, 50 cycles AC supply.
 
Chamber sizes available
 

Diameter	Depth load
250 X 450 mm	1.5 kw
300 X 500 mm	2.0 kw
350 X 550 mm	3.0 kw
400 X 600 mm	4.0 kw
450 X 600 mm	4.0 kw
550 X 750 mm	5.0 kw

 
 
Optional Accessories:
 

• Automatic low water level cut off device
• Pressure control switch
• Outer chamber made of SS Sheet instead of M.S. sheet

 
Size (e) & (f) are supplied with pedal lifting devil Radial locking system can be provided in sizes (e)a (f) on client request only.
 
The unit includes inner chamber, steam jacket electrically heated and lid made of stainless steel works on 3-phase, A/C, 440 V, 50 HZ with safety valve, automatic pressure control switch and others.
 

Chamber	The chamber is manufactured with stainless steel, heavy gauge, fitted with stainless steel forged ring and forged lid, chamber is fixed with two safety valve of stainless steel, water outlet valve, pressure gauge, and air inlet valve, stainless steel steam condenser, tube with stainless steel eject valve.
Steam Generator	The steam generator is produced with stainless steel heavy gauge fitted with pressure gauge and water draining valve.
Outer Cover	The outer cover is manufactured with stainless steel, duly insulated with high density mineral wool from the inner chamber and fitted with stable legs.
Principle	The steam produced from the jacket and gets condensed with the help of the eject valve which goes through condensin tube and the dry steam gets into the chamber to penetral into the packs contained in the chamber.

We provide an extensive range of laminar flow to our patrons. The unit is portable, simple, and produces a sterile zone with single direction laminar air streams which flows at preferred inclination and height, over the work area. These are adjustable for optimal orientation and the configuration is recommended for ampoule fitting and sealing operations in parental manufacture.
 
We offer our unit with HEPA & Pre-Filter, motor blower and other components, but without any of the optional accessories. Some of its attributes / advantages include:
 

• Self standing
• Ideal to provide poflen free clean air horizontally to sick bed/rooms of hay fever sufferers / allergic to air borne contamination and post operative care
• Doctor / Nurse can attend to patient without obstruction
• Offered with Hepa & Pre Filter, Motor, Blower and other but without optional accessories

Optional Accessories:-

• Lockable castor wheel
• Static Pressure Manometer
• Built in U.V. Germicidal Light
• Lighting system

Our range of 'Class 100' Laminar Air Flow BIOSAFE Biological Safety Cabinet meets the quality norms laid down by U.S. National Institute of Health, and the specifications of British Standard 5726 ¿ Appendix A for class II Biological Safety Cabinets. It is an integral factory assembled system. The basic unit is of externally Melamine laminated body housing. Pre Filters, HEPA Filters & Blowers assembly etc. It is appropriate for handling medium to low risk organisms encountered in research, investigation, labs in all branches of medical, agriculture, pharmaceutical and science.
 
Following are some of the salient features of our range:
 

Re-circulation of air	Offering highest level of cleanliness
Sliding sash	Renders unit convertible for use as a conventional vertical laminar down flow clean air work station
Filtered exhaust	Protects ambient environment, and avoids build up. Air borne particles
Supplementary air barrier	Prevents contamination through make up air
Built in U.V. germicidal light	Facilitates sterilization of working area before and after use
Cock	For gas, air or vacuum, (only 1 no) is provided
Static pressure manometer	Is used for monitoring the HEPA filters

 
 
Optional Features:
 

• Glove Ports and Gauntlets: Permits working with medium to low-risk organisms, pathogenic cultures or unidentified stains that tend to aerosolize in unknown concentrations

 

• Fumigation Tray: For effective disinfection/ decontamination

 
Biosafty Cabinet is offered with cord and plug and is ideal for working on 220 volts single phase, 50 Hz, Ac supply. HEPA filter and U.V. Tube is also offered as spare accessories.
 
Known as class III bio safety cabinets, these are used in scientific, medical & industrial sectors where localised clean air working environment is needed in the work zone along with the protection of personnel, and atmosphere.
 
The unit is supplied with following:
 

• HEPA filter for work area & for exhaust
• Pre filters
• U.V. light at work area & exhaust
• Front door fitted with glove ports
• Static pressure manometer
• Gas cock

Optional Accessories:

• Gas burner
• HEPA filter
• U.V. Tube
• Exhaust System suitable for duct above 6 ft: To throw the contaminated air to the atmosphere.
• Exhaust Ducting: PVC pipe with suitable fittings.
• Virus Burnout Unit: Ensures destruction of pathogens present in air being exhausted from the cabinet. This further enhances protection of environment.

 
Its exhaust system is guaranteed with 100% exhaust of air from the work area through ideal plenum under the SS perfor

We supply a wide assortment of microscopes to our esteemed clients. Our range is well known for its effective performance, unique design and durability. We have all the facilities to offer custom made products as per the requirements of the customers. Our range is available in market leading prices.          
 

We provide an extensive range of analytical balances to our patrons for various purposes. Our range is designed with clear LED display and vacuum fluorescent display. These are very easy to operate. On the basis of the demands of clients, we offer tailor-made solutions for our range.       

Our wide range of pH meter is used for potentiometric pH measurements. pH can be measured through various measures such as inform of solution or pH strips or using potentiometric method. We offer customized solutions for our range as per the client specification.  

Measures pH, mV(ORP0 Relative mV and Temperature in C and F
User- selectable pH resolution and accuracy 
0.001/0.01/0.1 pH accuracy
Multi-point push-button calibration with auto-buffer recoginition (up to 6 pH buffers)
Accepts standard glass pH combination half-cell or non-glass solid-state FET pH electrode directly without the need for adapters
Supplied software allows input of serial number, operator ID and company name for GLP requirements.
Displays electrode diagnosis like slope/offset and graphical icon of electrode condition after successful calibration
        

Backed by a team of reputed vendors, we offer a wide range of micro pipettes to our clients. Our range includes Handypette Digital Pipette, Vertex Pipette and Precise -XX Pipette. Our assortment is widely acclaimed for its unique design and effective performance. These are available in affordable prices.  

Our qualitative range of centrifuges is widely demanded for various pharmaceutical purposes. These are perfect in finishing and very effective in performance. Our range is made with premium quality raw material and we offer custom made products as per the demands of the clients.