Suppliers

Sell Offers

Buy Leads

Tenders

Trade Shows

Company Directory > Electronics & Electrical > Power Generators & Alternators >

Uday Udyog Electronics Private Limited

Secunderabad, Andhra Pradesh

IndiaMART Member Since: 2007
Products [63]
Phone: +(91)-(40)-27506475

HOME

ABOUT US

PRODUCTS & SERVICES

SEND ENQUIRY

Products & Services

DC-DC Converters

Offering our clients a wide range of DC - DC converters such as 30w Uu25-24s-i24, 25w Uu25-5s-i24, 25w Uu05-5000-i24, 25W UB15-850-I24, 25w U7-5-3300-i48, 24w U12-2000-i24, 20w U5-4000-i24, 17W UU18-Q2-I24, 17w U110-150-d48, 15w Uu10-p1-i12, 15w Ulp-u15-100-i230, 13w Uu15-t1-i24, 13w Uu15-85s-i48, 12w Uu24-450-i24, 12w Uu12-60d-i48, 12W UU12-24S-I24, 12w Uu12-12s-i48, 12w Uu12-12s-i24, 12w U24-500-i24, 10w Uu15-t1-i28, 10w Uu10-24s-i12, 10w Uu10-5s-i24, 10w Ulp-u5-200-i230, 10w U12-800-i24,10w B9-1000-300-i12, 8w Uu10-s15-i24, 8w B12-600-100-i48, 7.5w Uu10-15s-i24,7w Uu10-5-12d-i28, 6W UU12-500-I24, 6W UU10-5-12D-I12, 6w U10-10-8s-i28, 5w Uu10-t1-i24, 5w Uu5-s48-i24, 5w U5-1000-i24, 5w Uu5-5s-i24, 4w Uu5-15s-i24 and UUEPL 25 Watt Series.

10W B9-1000-300-I12

	B9-1000/300-I12
Sr.no	Parameters	Specifications
1)	Input Voltage	9V to 15V(12V Battery)
2)	Output Rating	(+)9V/1A
2)	Output Rating	(-)9V/0.3A
3)	Output Set point Accuracy	As per previous penta modules
4)	Line Regulation	±1%
	Load Regulation	±1%
5)	Efficiency	65.00%
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-10°C +60°C
8)	Storage temperature	-25°C +85°C
9)	Isolation a)Input to output	500Vdc common grounding the input
	b)Input to chassis
	c)output to chassis
	d)output to output
10)	Protections	As per previous penta modules
		As per previous penta modules
		As per previous penta modules
		As per previous penta modules
11)	Maximum Dimensions	50.8mmX50.8mmX17mm

10W U12-800-I24

	U12-800-I24
Sr.no	Parameters	Specifications
1)	Input Voltage	9V to 36V
2)	Output Rating	12V/0.8A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±1%
	Load Regulation	±1%
5)	Efficiency	NA
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	NA
8)	Storage temperature	NA
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	c)output to output	NA
10)	Protections	a)Input Reverse polarity- PARALLEL DIODE
		b)Output Overload above 110% of rated load
		c)Output Short circuit.
11)	Maximum Dimensions	50.8mmX25.4mmX16mm

10W ULP-U5-200-I230

	ULP-U5/200-I230
Sr.no	Parameters	Specifications
1)	Input Voltage	220VAC to 242VAC
2)	Output Rating	+5V/2A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±0.2%
	Load Regulation	±0.2%
5)	Efficiency	NA
6)	Minimum load	10% at 5V/2A (200mA)
7)	Ripple & Noise	3mV RMS
8)	Operating temperature	-10°C +70°C
9)	Storage temperature	-40°C +70°C
10)	Isolation a)Input to output	1.5KVDC
	b)Input to chassis	1.5KVDC
	c)output to chassis	500VDC
	c)output to output	NA
11)	Protections	A)Output Overload above 110% of rated load
11)	Protections	B)Output Short circuit.
12)	Maximum Dimensions	103mmX83mmX48mm

10W UU10-24S-I12

	UU10-24S-I12
Specifications
Sr.no	Parameters	Specifications
1	Input Voltage	8.5V to 13.5V (12V NOMINAL)
2	Output Rating	a)+24V/0.400A
3	Output Set point Accuracy	`+1 - 1.5%
4	Line Regulation	0.50%
5	Load Regulation	0.50%
6	Efficiency @12VDC input	70.00%
7	Ripple/Noise	50/100mV pk-pk Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
8	Operating temperature	-10 +55°C
9	Storage temperature	-20°C +85°C
10	Isolation a)Input to output b)Input to chassis c)output to chassis	500 VDC
11	Protections	A)Output Overload above 110% of rated load
		B)Output Short circuit.
		C)Input reverse polarity
12	Maximum Dimensions	52 x 52 x 17 in mm

10W UU10-5S-I24

	10W,SINGLE OUTPUT DC-DC CONVERTER (UU10-5S-I24)
Specifications
Sr.no	Parameters	Specifications
1)	Input Voltage	9V to 36V
2)	Output Rating	+5V/2A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency @24VDC input	>80%
	Ripple & Noise	Err:509
		Ripple measured on a 20MHz Osc with a 1:1 probe having
6)		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +71°C CASE
8)	Storage temperature	-20°C +100°C
9)	Isolation a)Input to output b)Input to chassis c)output to chassis	>100Mohms at 500VDC >100Mohms at 500VDC >100Mohms at 500VDC
10)	Protections	a)Input Reverse polarity-Parallel Diode aross input.
		b)Output Overload above 110% of rated load
		c)Output Short circuit.
		d) Over voltage protection above 115%
11)	Maximum Dimensions	50.8 x 25.7 x 11 in mm(tolerance ±0.3mm)

10W UU15-T1-I28

	UU15-T1-I28
Sr.no	Parameters	Specifications
1)	Input Voltage	15V to 44V
2)	Output Rating	(+)12V/0.3A
		(-)12/0.3A
		5V/0.5A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency	>65%
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-30°C +85°C
8)	Storage temperature	-30°C +85°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	d)output to output	NA
10)	Protections	B)Output Overload above 110% of rated load
10)	Protections	C)Output Short circuit.
11)	Maximum Dimensions	54mmx54mmx16mm

12W U24-500-I24

	U24-500-I24
Sr.no	Parameters	Specifications
1)	Input Voltage	18V to 36V
2)	Output Rating	24V/0.500A
3)	Output Set point Accuracy	±1%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency	NA
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +55°C
8)	Storage temperature	-30°C +85°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	d)output to output	NA
10)	Protections	A)Output Overload above 110% of rated load
10)	Protections	B)Output Short circuit.
11)	Maximum Dimensions	50.8mmX25.4mmX16mm

12W UU12-12S-I24

	UU12-12S-I24
Sr.no	Parameters	Specifications
1)	Input Voltage	9V to 36V
2)	Output Rating	12V/1A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency @24VDC input	>80%
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20�C +71�C CASE
8)	Storage temperature	-20�C +100�C
9)	Isolation a)Input to output	>100Mohms at 500VDC
	b)Input to chassis	>100Mohms at 500VDC
	c)output to chassis	>100Mohms at 500VDC
10)	Protections	a)Input Reverse polarity-Parallel Diode aross input.
		b)Output Overload above 110% of rated load
		c)Output Short circuit.
11)	Maximum Dimensions	50.8 x 25.4 x 16 in mm(tolerance ±0.3mm)

12W UU12-12S-I48

	UU12-12S-I48
Sr.no	Parameters	Specifications
1)	Input Voltage	36V to 72V
2)	Output Rating	12V/1A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±1%
	Load Regulation	±1%
5)	Efficiency	NA
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +55°C
8)	Storage temperature	-20°C +85°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	c)output to output	NA
10)	Protections	a)Input Reverse polarity-Parallel Diode aross input.
		a)Output Overload above 110% of rated load
		b)Output Short circuit.
11)	Maximum Dimensions	50.8 x 25.4 x 16 in mm(tolerance ±0.3mm)

12W UU12-24S-I24

	12W,SINGLE OUTPUT DC-DC CONVERTER (UU12-24S-I24)
Specifications
Sr.no	Parameters	Specifications
1)	Input Voltage	9V to 36V
2)	Output Rating	+24V/0.5A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency @24VDC input	>80%
	Ripple & Noise	Err:509
		Ripple measured on a 20MHz Osc with a 1:1 probe having
6)		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +71°C CASE
8)	Storage temperature	-20°C +100°C
9)	Isolation a)Input to output b)Input to chassis c)output to chassis	>100Mohms at 500VDC >100Mohms at 500VDC >100Mohms at 500VDC
10)	Protections	a)Input Reverse polarity-Parallel Diode aross input.
		b)Output Overload above 110% of rated load
		c)Output Short circuit.
		d) Over voltage protection above 115%
11)	Maximum Dimensions	50.8 x 25.7 x 11 in mm(tolerance ±0.3mm)

12W UU12-60D-I48

	UU12-60D-I48
Sr.no	Parameters	Specifications
1)	Input Voltage	36V to 72V
2)	Output Rating	(+)60V/100mA
2)	Output Rating	(-)60V/100mA
3)	Output Set point Accuracy	±1%
4)	Line Regulation	±1%
	Load Regulation	±1%
5)	Efficiency	NA
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-10°C +55°C
8)	Storage temperature	-20°C +70°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	500VDC
	c)output to chassis	NA
	d)output to output	NA
10)	Protections	A)Input Reverse polarity- PARALLEL DIODE
		B)Output Overload above 110% of rated load
		C)Output Short circuit.
11)	Maximum Dimensions	50.8mmX50.8mmX16mm

12W UU24-450-I24

	UU24-450-I24
Sr.no	Parameters	Specifications
1)	Input Voltage	9V to 36V
2)	Output Rating	+24V/0.450A
3)	Output Set point Accuracy	±1%
4)	Line Regulation	±1%
	Load Regulation	±1%
5)	Efficiency input	>70%
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-10°C +55°C
8)	Storage temperature	NA
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	500VDC
	c)output to chassis	500VDC
	c)output to output	500VDC
10)	Protections	a)Input Reverse polarity-Parallel Diode aross input.
		b)Output Overload above 110% of rated load
		c)Output Short circuit.
11)	Maximum Dimensions	50.8 x 25.4 x 16 in mm(tolerance ±0.3mm)

13W UU15-85S-I48

	UU15-85S-I48
Sr.no	Parameters	Specifications
1)	Input Voltage	36V to 72V
2)	Output Rating	85V/150mA
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±1%
	Load Regulation	±1%
5)	Efficiency	NA
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +55°C
8)	Storage temperature	-20°C +85°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	c)output to output	NA
10)	Protections	a)Input Reverse polarity-Parallel Diode aross input.
		b)Output Overload above 110% of rated load
		c)Output Short circuit.
11)	Maximum Dimensions	50.8 x 50.8 x 17 in mm(tolerance ±0.3mm)

13W UU15-T1-I24

	UU15-T1-I28
Sr.no	Parameters	Specifications
1)	Input Voltage	15V to 44V
2)	Output Rating	(+)12V/0.3A
		(-)12/0.3A
		5V/0.5A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency	>65%
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-30°C +85°C
8)	Storage temperature	-30°C +85°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	d)output to output	NA
10)	Protections	B)Output Overload above 110% of rated load
10)	Protections	C)Output Short circuit.
11)	Maximum Dimensions	54mmx54mmx16mm

15W ULP-U15-100-I230

	ULP-U15/100-I230
Sr.no	Parameters	Specifications
1)	Input Voltage	220VAC to 242VAC
2)	Output Rating	15V/1A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±0.2%
	Load Regulation	±0.2%
5)	Efficiency	NA
6)	Minimum load	10% at 5V/2A (200mA)
7)	Ripple & Noise	3mV RMS
8)	Operating temperature	-10°C +70°C
9)	Storage temperature	-40°C +70°C
10)	Isolation a)Input to output	1.5KVDC
	b)Input to chassis	1.5KVDC
	c)output to chassis	500VDC
	c)output to output	NA
11)	Protections	A)Output Overload above 110% of rated load
11)	Protections	B)Output Short circuit.
12)	Maximum Dimensions	103mmX83mmX48mm

15W UU10-P1-I12

	UU10-P1-I12
Specifications
Sr.no	Parameters	Specifications
1	Input Voltage	8.5V to 13.5VDC (12V NOMINAL)
2	Output Rating	a)+5V/1A
		b)-5.2V/180mA
		c)+30V/15mA
		d)+12V/20mA
		e)-12V/15mA
3	Output Set point Accuracy	+/- 1.5%
4	Line Regulation	±1%
5	Load Regulation	±1%
6	Efficiency @12VDC input	>55%
7	Ripple/Noise	50mV pk-pk Ripple measured on a 20MHz Osc with a 1:1 probe having
7	Ripple/Noise	shortest ground path and 0.1µFacross it.
8	Operating temperature	-10°C +55°C
9	Storage temperature	-20°C +85°C
10	Isolation: a)Input to output	500 VDC
	b)Input to chassis
	c)output to chassis
11	Protections	A)Output Overload above 110% of rated load
		B)Output Short circuit.
		C)Input reverse polarity
		D)Remote shutdown
12	Maximum Dimensions	52 x 52 x 17 in mm

17W U110-150-D48

	U110-150-D48
Sr.no	Parameters	Specifications
1)	Input Voltage	36V to 72V
2)	Output Rating	110V/0.150A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±1%
	Load Regulation	±1%
5)	Efficiency	NA
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +55°C
8)	Storage temperature	-20°C +85°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	500VDC
	c)output to chassis	500VDC
	c)output to output	NA
10)	Protections	a)Input Reverse polarity (External fuse recommended)
		a)Output Overload above 110% of rated load
		b)Output Short circuit.
11)	Maximum Dimensions	50.8mmX40.6mmX15mm

17W UU18-Q2-I24

	UU10-P1-I12
Specifications
Sr.no	Parameters	Specifications
1	Input Voltage	9V to 36VDC
2	Output Rating	a)+5V/2A
		b)+3.3V/2A
		c)+2.5V/0.25A
		d)1.2V/0.25A

3	Output Set point Accuracy	+/- 1.5%
4	Line Regulation	�0.5% for +5V,2.5,1.2V, �0.75% for +3.3V
5	Load Regulation	�0.5% for +5V,2.5V,-1.2V, �0.75% for +3.3V
6	Efficiency @24VDC input	65.00%
7	Ripple/Noise	50mV pk-pk for +5V,+3.3V & 100mV pk-pk for 1.2 & 2.5outputs.
7	Ripple/Noise	Ripple measured on a 20MHz Osc with a 1:1 probe
8	Operating temperature	-20�C +70�C
9	Storage temperature	-40�C +85�C
10	Isolation: a)Input to output	>100Mohms at 1 KVDC
	b)Input to chassis	>100Mohms at 1 KVDC
	c)output to chassis	>100Mohms at 0.5 KVDC
11	Protections	A)Output Overload above 110% of rated load
		B)Output Short circuit.
		C)Input reverse polarity
		D)Remote shutdown
12	Maximum Dimensions	76 x 51 x 24 in mm(without flange) & 76 x 73 x 24 in mm(with flange) �0.3 mm

20W U5-4000-I24

	U5-4000-I24
Sr.no	Parameters	Specifications
1)	Input Voltage	9V to 36V
2)	Output Rating	5V/4A
3)	Output Set point Accuracy	±1%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency	75.00%
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +55°C
8)	Storage temperature	-20°C +85°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	c)output to output	NA
10)	Protections	a)Output overvoltage
		a)Output Overload above 110% of rated load
		b)Output Short circuit.
11)	Maximum Dimensions	65mmX50mmX15mm (or) 65mmX70mmX15mm

24W U12-2000-I24

	U12-2000-I24
Sr.no	Parameters	Specifications
1)	Input Voltage	18V to 36V
2)	Output Rating	12V/2A
3)	Output Set point Accuracy	±1%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency	70.00%
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +60°C
8)	Storage temperature	-30°C +70°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	c)output to output	NA
10)	Protections	a)Input Reverse polarity
		a)Output Overload above 110% of rated load
		b)Output Short circuit.
11)	Maximum Dimensions	65mmX50mmX15mm

25W U7-5-3300-I48

	U7-5-3300-I48
Sr.no	Parameters	Specifications
1)	Input Voltage	48VDC
2)	Output Rating	7.5V/3.3A
3)	Output Set point Accuracy	±1%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency	70.00%
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +60°C
8)	Storage temperature	-30°C +70°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	c)output to output	NA
10)	Protections	a)Input Reverse polarity (External fuse recommended)
		a)Output Overload above 110% of rated load
		b)Output Short circuit.
11)	Maximum Dimensions	70mmX65mmX16mm

25W UB15-850-I24

	UB15-850-I24
Sr.no	Parameters	Specifications
1)	Input Voltage	18V to 36V
2)	Output Rating	(+)15V/850mA
2)	Output Rating	(-)15V/850mA
3)	Output Set point Accuracy	±1%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency	75.00%
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-25°C +71°C
8)	Storage temperature	-40°C +85°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	500VDC
	c)output to chassis	500VDC
	d)output to output	NA
10)	Protections	a)Output overvoltage
		B)Output Overload above 110% of rated load
		C)Output Short circuit.
		D) Input reverse polarity - Optional
11)	Maximum Dimensions	65mmX50mmX15mm

25W UU05-5000-I24

	UU05-5000-I24
Sr.no	Parameters	Specifications
1)	Input Voltage	18V to 36V
2)	Output Rating	5V/5A
3)	Output Set point Accuracy	±1%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency	75.00%
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-25°C +71°C
8)	Storage temperature	-40°C +85°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	500VDC
	c)output to chassis	500VDC
	c)output to output	NA
10)	Protections	a)Input Reverse polarity- OPTIONAL
		b)Output Overload above 110% of rated load
		c)Output Short circuit.
		d) Output Overvoltage
11)	Maximum Dimensions	65mmX50mmX15mm

25W UU25-5S-I24

	25W,SINGLE OUTPUT DC-DC CONVERTER (UU25-5S-I24)
Specifications
Sr.no	Parameters	Specifications
1)	Input Voltage	18V to 36V
2)	Output Rating	+5V/5A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±0.5%
5)	Efficiency @24VDC input	>80%
	Ripple & Noise	Err:509
6)	Ripple & Noise	Ripple measured on a 20MHz Osc with a 1:1 probe having shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +71°C CASE
8)	Storage temperature	-20°C +100°C
9)	Isolation a)Input to output b)Input to chassis c)output to chassis	>100Mohms at 500VDC >100Mohms at 500VDC >100Mohms at 500VDC
	Protections	a)Input Reverse polarity-Parallel Diode aross input.
		b)Output Overload above 110% of rated load
		c)Output Short circuit.
10)		d) Over voltage protection above 115%
11)	Maximum Dimensions	50.8 x 50.8 x 15 in mm(tolerance ±0.3mm)

30W UU25-24S-I24

	25W,SINGLE OUTPUT DC-DC CONVERTER (UU25-24S-I24)
Specifications
Sr.no	Parameters	Specifications
1)	Input Voltage	18V to 36V
2)	Output Rating	+24V/1.25A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±0.5%
5)	Efficiency @24VDC input	>80%
	Ripple & Noise	Err:509
6)	Ripple & Noise	Ripple measured on a 20MHz Osc with a 1:1 probe having shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +71°C CASE
8)	Storage temperature	-20°C +100°C
9)	Isolation a)Input to output b)Input to chassis c)output to chassis	>100Mohms at 500VDC >100Mohms at 500VDC >100Mohms at 500VDC
	Protections	a)Input Reverse polarity-Parallel Diode aross input.
		b)Output Overload above 110% of rated load
		c)Output Short circuit.
10)		d) Over voltage protection above 115%
11)	Maximum Dimensions	50.8 x 50.8 x 15 in mm(tolerance ±0.3mm)

4W UU5-15S-I24

	UU5-15S-I24
Sr.no	Parameters	Specifications
1)	Input Voltage	9V to 36V
2)	Output Rating	15V/0.250A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±1%
	Load Regulation	±1%
5)	Efficiency	NA
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +55°C
8)	Storage temperature	-20°C +75°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	d)output to output	NA
10)	Protections	A)Output Overload above 110% of rated load
10)	Protections	B)Output Short circuit.
11)	Maximum Dimensions	50.8mmX25.4mmX16mm

5W U5-1000-I24

	U5-1000-I24
Sr.no	Parameters	Specifications
1)	Input Voltage	18V to 36V (24V NOMINAL)
2)	Output Rating	5V/1.0A
3)	Output Set point Accuracy	±1%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency	>65%
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +60°C
8)	Storage temperature	-30°C +70°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	c)output to output	NA
10)	Protections	a)Output overvoltage
		a)Output Overload above 110% of rated load
		b)Output Short circuit.
11)	Maximum Dimensions	2" x 1" x 17mm

5W UU10-T1-I24

	UU10-T1-I24
Sr.no	Parameters	Specifications
1)	Input Voltage	15V to 44V
2)	Output Rating	(+)12V/0.3A
		(-)12/0.3A
		5V/0.5A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency	>65%
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-30°C +85°C
8)	Storage temperature	-30°C +85°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	d)output to output	NA
10)	Protections	B)Output Overload above 110% of rated load
10)	Protections	C)Output Short circuit.
11)	Maximum Dimensions	54mmx54mmx16mm

5W UU5-5S-I24

	5W,SINGLE OUTPUT DC-DC CONVERTER (UU5-5S-I24)
Sr.no	Parameters	Specifications
1)	Input Voltage	9V to 36V
2)	Output Rating	+5V/1A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency @24VDC input	>80%
	Ripple & Noise	Err:509
		Ripple measured on a 20MHz Osc with a 1:1 probe having
6)		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +71°C CASE
8)	Storage temperature	-20°C +100°C
9)	Isolation a)Input to output b)Input to chassis c)output to chassis	>100Mohms at 500VDC >100Mohms at 500VDC >100Mohms at 500VDC
10)	Protections	a)Input Reverse polarity-Parallel Diode aross input.
		b)Output Overload above 110% of rated load
		c)Output Short circuit.
		d) Over voltage protection above 115%
11)	Maximum Dimensions	31.75 x 25.7 x 11 in mm(tolerance ±0.3mm)

5W UU5-S48-I24

	UU5-S48-I24
Specifications
Sr.no	Parameters	Specifications
1	Input Voltage	15V to 44V (24V NOMINAL)
2	Output Rating	a)+48V/0.100A
3	Output Set point Accuracy	±1%
4	Line Regulation	±0.5%
5	Load Regulation	±0.5%
6	Efficiency @24VDC input	>70%
7	Ripple/Noise	50/100mV pk-pk Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
8	Operating temperature	-10 +70°C
9	Storage temperature	-20°C +85°C
10	Isolation a)Input to output	500 VDC
	b)Input to chassis
	c)output to chassis
11	Protections	A)Output Overload above 110% of rated load
11	Protections	B)Output Short circuit.
12	Maximum Dimensions	50.8 x 25.4 x 16 in mm

6W U10-10-8S-I28

	U10-10.8S-I28
Sr.no	Parameters	Specifications
1)	Input Voltage	18V to 36V
2)	Output Rating	10.8V/0.5A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±1%
	Load Regulation	±1%
5)	Efficiency	NA
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +55°C
8)	Storage temperature	-20°C +75°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	d)output to output	NA
10)	Protections	A)Output Overload above 110% of rated load
10)	Protections	B)Output Short circuit.
11)	Maximum Dimensions	50.8mmX25.4mmX16mm

6W UU10-5-12D-I12

	UU10-5/12D-I12
Sr.no	Parameters	Specifications
1)	Input Voltage	9V to 18V
2)	Output Rating	5V/1A
2)	Output Rating	12V/0.1A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±0.5%
	Load Regulation	±0.5%
5)	Efficiency	NA
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-10°C +55°C
8)	Storage temperature	-20°C +85°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	d)output to output	NA
10)	Protections	B)Output Overload above 110% of rated load
10)	Protections	C)Output Short circuit.
11)	Maximum Dimensions	50.8mmX25.4mmX16mm

6W UU12-500-I24

	UU12-500-I24
Sr.no	Parameters	Specifications
1)	Input Voltage	9 to 36V
2)	Output Rating	12V/500mA
3)	Output Set point Accuracy	±1%
4)	Line Regulation	±1%
	Load Regulation	±1%
5)	Efficiency	65.00%
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +85°C
8)	Storage temperature	-30°C +85°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	c)output to output	NA
10)	Protections	a)Output Overload above 110% of rated load
10)	Protections	b)Output Short circuit.
11)	Maximum Dimensions	50.8 x 25.4 x 16 in mm(tolerance ±0.3mm)

7.5W UU10-15S-I24

	UU10-15S-I24
Sr.no	Parameters	Specifications
1)	Input Voltage	9 to 36V
2)	Output Rating	15V/500mA
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±1%
	Load Regulation	±1%
5)	Efficiency	NA
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +55°C
8)	Storage temperature	-20°C +85°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	c)output to output	NA
10)	Protections	a)Input Reverse polarity-Parallel Diode aross input.
		b)Output Overload above 110% of rated load
		c)Output Short circuit.
11)	Maximum Dimensions	50.8 x 25.4 x 16 in mm(tolerance ±0.3mm)

7W UU10-5-12D-I28

	UU10-5/12D-I28
Sr.no	Parameters	Specifications
1)	Input Voltage	18V to 36V
2)	Output Rating	5V/700mA
2)	Output Rating	12V/300mA
3)	Output Set point Accuracy	±1%
4)	Line Regulation	±5% on main o/p & 1% on Aux o/p
	Load Regulation	±5% on main o/p & 1% on Aux o/p
5)	Efficiency	NA
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +70°C
8)	Storage temperature	-30°C +55°C
9)	Humidity test	40 deg C/95% Humidity
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	d)output to output	500VDC
10)	Protections	a)Input Reverse polarity- PARALLEL DIODE
		b)Output Overload above 110% of rated load
		c)Output Short circuit.
11)	Maximum Dimensions	50.8mmX25.4mmX16mm

8W B12-600-100-I48

	B12-600/100-I48
Sr.no	Parameters	Specifications
1)	Input Voltage	36V to 72V
2)	Output Rating	(+)12V/0.6A
2)	Output Rating	(-)12V/0.1A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±1%
	Load Regulation	±1%
5)	Efficiency	NA
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	NA
8)	Storage temperature	NA
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	NA
	c)output to chassis	NA
	d)output to output	NA
10)	Protections	A)Input Reverse polarity- PARALLEL DIODE
		B)Output Overload above 110% of rated load
		C)Output Short circuit.
11)	Maximum Dimensions	50.8mmX25.4mm X16mm

8W UU10-S15-I24

	UU10-S15-I24
Specifications
Sr.no	Parameters	Specifications
1	Input Voltage	9V to 36V (24V NOMINAL)
2	Output Voltage/Rating	15V/0.660A
3	Output Set point Accuracy	1.50%
4	Line Regulation	0.50%
5	Load Regulation	0.50%
6	Efficiency @24VDC input	>70%
7	Ripple/Noise	50/100mV pk-pk Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
8	Operating temperature	-20 +55°C
9	Storage temperature	-20°C +85°C
10	Isolation a)Input to output	500 VDC
	b)Input to chassis
	c)output to chassis
11	Protections	A)Output Overload above 110% of rated load
11	Protections	B)Output Short circuit.
12	Maximum Dimensions	50.8 x 25.4 x 16 in mm

UUEPL 25 Watt Series

	UU10-5D-I28
Sr.no	Parameters	Specifications
1)	Input Voltage	18V to 36V
2)	Output Rating	(+)5V/0.5A
2)	Output Rating	(-)5V/0.1A
3)	Output Set point Accuracy	±1.5%
4)	Line Regulation	±1%
	Load Regulation	±1%
5)	Efficiency	NA
6)	Ripple & Noise	≤ 50mV/100 pk-pk
		Ripple measured on a 20MHz Osc with a 1:1 probe having
		shortest ground path and 0.1µFacross it.
7)	Operating temperature	-20°C +55°C
8)	Storage temperature	-20°C +85°C
9)	Isolation a)Input to output	500VDC
	b)Input to chassis	500VDC
	c)output to chassis	500VDC
	d)output to output	500VDC
10)	Protections	a)Output Overload above 110% of rated load
10)	Protections	b)Output Short circuit.
11)	Maximum Dimensions	50.8mmX25.4mmX16mm