 |
|
These holographic induction sealing Wads are aluminum induction cap with hologram seals which are widely used to prevent tampering of products in food, pharmaceutical, lubricants, oil, pesticides and various other industries. These holographic induction sealing wads prevent the product from leakage or any sort of contamination
|
 
 
| Induction Wads
We are offering a wide variety of induction wads which are used for sealing purposes using advanced technologies. With the help of induction wads sealing is done after the containers are screwed with plastic caps these wads becomes active when an induction current is passed on top of the cap by an induction-sealing machine. However when these caps are unscrewed the aluminum foil gets sealed on the container along with that interleaf is retained in the plastic cap as it is to make it leak proof. This process of induction sealing is appreciated for no wastage, no direct heat and sealing with 100 % performance. Specifications:
- Product : Induction Wads
- Application : Sealing of Bottles
- Bottle Type : Pet, Poly, PVC & Glass
- Sealing Type : Direct & Induction
- Serving Industries : Oil, Chemical
| Product Name | Wad Thickness | Suitable for | Specification | | U I W 102 - Paper Board
Induction Wad (Poly) | 0.8 mm PP
(Three layers) | LD / HD / PP
Bottles | 0.5mm SHB Board, 0.03 mm Foil
0.01 LD Layer | | U I W 103 - Polyester
Lamination Paper Board
Induction Wads (Poly) | 1.1 mm PP
(Five layers) | LD / HD / PP
Bottles | 0.01mm PET film, 0.5mm SHB Board
0.01mm Polyester film, Hotmelt Coating,
0.03 mm Al. Foil, 0 .01mm LD Layer | | U I W 104 Induction wads
with E.P. (Poly) | 1.2 mm PP
(Four layers) | LD / HD / PP
Bottles | 0.6 / 0.8 / 1.0 / 1.2 mm, E.P. Wads +
Bonding coating + 0.5mm paper Board +
Hot melt coating + 0.03 mm Alu.foil +
0.01mm LDPE Liner. | | U I W 105 Paper Board
Induction wad PVC / PET | 0.8mm PET
(Two layers) | PVC / PET
Bottles | 0.5mm SHB board +
0.025mm Alu. Foil +
8 gsm sealant coating | | U I W 106 Polyester
Lamination Board
Induction wad PVC / PET | 1.1 mm PET
(Four layers) | PVC / PET
Bottles | 0.01mm PET Film, 0.5mm SHB board
0.01mm polyester film, 0.25 mm Alu. Foil
8 gsm Sealant Coating | | U I W 107 Induction Wads
with E.P. PVC \ PET | 1.2 mm PET
(Three layers) | PVC / PET
Bottles | 0.6 / 0.8 / 1.0 / 1.2mm, E.P. Wads +
6gsm bonding coating, 0.5mm SHB board
Hot melt coating, 0.025 alu. foil + | 
|
 
Induction Wads Triple Layer
Features :
- Low Cost
- Available in all size
- Suitable for direct sealing
- Suitable for Pet/Poly/PVC
- Single Stroke operation
- Single Stroke operation
- Productivity per hour
- Suitable for SMEs
|
|
| Induction Wads Double Layer
Features : - Low Cost
- Available in all size
- Suitable for direct sealing
- Suitable for Pet/Poly/PVC
- Single Stroke operation
- Single Stroke operation
- Productivity per hour
- Suitable for SME
|
|
Aluminium Foil Discs Induction Sealing Wads Induction Wads Induction Wads Triple Layer Induction Wads Double Layer
|
© Uma Plastic & Industries. All Rights Reserved (Terms of Use)