 |
Angle Sensing Feedback Control |
|
|
We are counted amongst the reputed names engaged in manufacturing, supplying and exporting a wide range of Angle Sensing Feedback Control.
|
 
 
| Angle Sensing Feedback Control(Item Code: NPS12) | Specifications | NPS12 | | Technology | Conductive plastic | | Body dia. | 13 | | Shaft dia. | 03/03/17 | | Std. resistance | 500-10K | | Power dissipation | 0.3W | | Independent linearity | ±5% | | Std. elect./mech. Angle with stop. | 300/360 | | Rotational life (typical) millions of shaft | 2 | | Operating torque N-mm | 10 | | Options | Special elect. Angle, special machining on shaft, Special linearity up to ±3% |
|
 
Pots.for Angle Sensing Feedback Control NPS22
| Specifications | NPS22 | | Technology | Conductive plastic | | Body dia. | 22 | | Shaft dia. | 6/6.35 | | Std. resistance | 500-10K | | Power dissipation | 1W | | Independent linearity | ±2% | | Std. elect./mech. Angle with stop. | 340/360 | | Rotational life (typical) millions of shaft | 10 | | Operating torque N-mm | 5 | | Options | Special elect. angle, special machining on shaft, Special linearity up to ±0.5% |
|
|
| Angle Sensing Feedback Control 40CP
| Specifications | 40CP / WW | | Technology | Conductive plastic/ Wire Wound | | Body dia. | 36.5 | | Shaft dia. | 06/06/35 | | Std. resistance | 500-10K | | Power dissipation | 2W | | Independent linearity | ±0.5% | | Std. elect./mech. Angle with stop. | 350/360 | | Rotational life (typical) millions of shaft | 2 (40 WW) 10(40CP) | | Operating torque N-mm | 3 | | Options | Special elect. angle, low torque, special machining on shaft, Special linearity up to ±0.2% - ww, rear shaft |
|
Angle Sensing Feedback Control 50CP
| Specifications | 50CP / WW | | Technology | Conductive plastic/ Wire Wound | | Body dia. | 50 | | Shaft dia. | 6/6.35 | | Std. resistance | 500-10K | | Power dissipation | 3W | | Independent linearity | ±0.5% | | Std. elect./mech. Angle with stop. | 350/360 | | Rotational life (typical) millions of shaft | 2 (50 WW) 10 (50CP) | | Operating torque N-mm | 3 | | Options | Special elect. angle, low torque, special machining on shaft, Special linearity up to ±0.2% - ww, rear shaft |
|
|
|
Potentio Meters Panel Setting Pots Frequently Set Bushing Mount Pots Angle Sensing Feedback Control Angle Sensing Feedback Control Pots.for Angle Sensing Feedback Control NPS22 Angle Sensing Feedback Control 40CP Angle Sensing Feedback Control 50CP Hollow Shaft Linear Pots Linear Pots Multi Turn Pots Joystick Controllers Resistive Elements
|
© Uni Automation India Private Limited. All Rights Reserved (Terms of Use)