Model Unimeck 1000
Auto – Diagnostic Computer Balancer Power and Reliability, Unimeck presents the 1000 computerized wheel balancing machines. Built as ruggedly larger balancer, it can provide consistent output in high volume service environments. Ideal for tight shop species. It is packed with state of the art hardware and self diagnostic features.

The Outstanding features of Unimeck 1000
• Push button self calibration
• Push button start
• Quick chucking nut
• Fail – Safe autotension drive
• Vibration isolation system

It's equipped with separately designed 56 frame motor, with high starting torque and low power consumption.
The Unimeck 1000's advanced design incorporates three service modules - the PCB, sensor arm and motor. That adds up to significant savings in downtime service expense.

Specifications

Accuracy	Less than 1 gm.
Cycle Time	Approx. 6.9 secs.
Types of Balance	2 plane dynamic / static / or Aluminum for hidden weights
Digitals readout	Grams or OZ
Rim Dimension	Rim distance 1”-14”, diameter 2”-20” Width 3”-20”
Tyre Diameter	102 cm (40”)
Tyre Capacity	Accommodates all known car and light commercial wheels
Power Requirements	220V, Single Phase 50 Hz, 5 Amp
CVT Required	500 VA.
Display	20 m.m. high LEDs.

Standard:
Maruti 800, Zen, Van, Esteem, Baleno Alto, Wagon-R, Gypsy, Versa, Swift
Santro, Accent, Getz, Honda City, Fiat Palio, Petra, Ford Ikon, Lancer, Opel Astra Skoda, Indica, Indigo, Indigo Marina Toyota Corolla and Tata Sumo.

Electric Motor:
• 2 HP 1440 RPM
• Single / Three Phase

Salient Features:
• Totally Electrical Operated
• Power Consumption is Negligible and Occupies Minimum Space.
• Hydraulic Jack Used for Accurate Straightening of Center Plate of Steel Rim
• This is Perfect Machine For Straightening Inner, Outer & Centre of Rim simultaneously

Automatic AC Recycling Machine is economical, fast and easy to use. It is designed for careful handling of tyres and rims. It is particularly suitable for use when space is limited. The fitting arm which pivots at the side allows the machine to be installed adjusted to a wall.
It is fitted with conical table for securing the wheel from 10" to 19" the swinging arm makes it possible to work on any tyre.

Salient Features:
• Totally electrical operated-No need for compressed air
• No need for foundation, it can move on its wheels
• Single Foot pedal switch to control bead breaking to mounting / demounting operation
• Manual handle provided to complete operation-in-progress effortlessly in case of power failure
• Power consumption is negligible and occupies minimum space. Strong & Compact

Standard Accessories:
Bead Lifting lever, Hold down cone, tyre lub, container, valve & valve die box.

Specifications:

Wheel diameter:	Standard 10" to 19"
Bead breaker force :	2.5 Tonnes.
Electric motor :	I.H.P. 220/380V, 3 Phase, 50 Hz.
Weight :	200 K.G . (Approx.)

The Pneumatic Electrical Tyre Changer is yet another significant product added to the prestigious range of Unimeck's Wheels service station equipment. It is designed using the most advanced techniques to facilitate easy, quick, removal and mounting of tyres. Constant research and development has extensively added to its efficiency, safely and reliability. This machine is applicable for all Cars & LCV'S.

Specifications:

Air pressure required	8 -10 BAR
Rim size	Upto 16" (20")
Tyre width maximum	10"
Tyre diameter maximum	35"
Bead breaking power	2000kg at 10 BAR
Bead breaking method	Pneumatic
Motor	220V/50HZ -1 Hp
Weight	250 Kgs

• Double Cutter for vehicles & Domestic Keys
• Cutters & Spares are readily available for all models

• Unimeck Automatic Tyre Changer gives utmost in efficiency and performance at a surprisingly reasonable cost
• It is the end result of state-of-art technology and first rate materials. Its design is simple and it is extremely easy to use and yet its performance leaves nothing to be desired
• The Tyre Changer is compact, sturdy and elegant in design
• It takes up little room and can be placed against the wall
• The table is fitted with four jaws that provide perfect clamping under all operating conditions. They handle wheels from 10'' to 20'' in diameters with tyres upto 12'' in width
• Protection is provided for alloy wheel clamping

Specifications:

Wheels Clamping capacity from outside	10'' to 18''
Bead breaking cylinder force on blade	1350 kg.
Max. wheel width	12''
Electric Motor	Three Phase 400/440V, 50 Hz, 1HP
Single Phase	200/220V, 50Hz, 1 HP
Operating Pressure	10 bar (140 psi)

Model Unimeck 2000
The Unimeck lift is electro-mechanical and is especially suitable for all kinds of repairs that require free access to under body and wheels.

Features:
• Very low minimum height - only 105 mm
• Easy, quick installation and very little maintenance
• Sturdy and reliable
• Asymmetric design and angle-set posts allow car doors to be opened freely

Specifications:

Model	Unimeck 2000
Lifting capacity	3000/2500 kg
Total width	3000 mm
Drive-through width	2120 mm
Post height	2600 mm
Lifting height	1890 mm
Min. height	105mm
Pad lifting height	105-150mm
Lifting time	45 sec.
Motor	440/380 volts.

Optional extras:
Rubber cover, auxiliary ramps, high pick-up pads.

Unimeck's in-ground Hydraulic Lift are designed to offer maximum reliability and flexibility. The Lift are designed to life safely and efficiently all types of passenger cars and commercial vehicles for carrying out the tasks of washing, lubrication, maintenance and repairs. Customers can choose from the models available-Fully Hydraulic models with and independent intermediate oil reservoir or Semi-Hydraulic models with self-contained air/oil reservoir.

Specifications:

		Fully Hydraulic
		HS 00 040	HS 00 080	HS 00 080
Capacity	(tons)	4	8	8
No. of Posts		1	1	2
Plunger diameter,	mm	270	320	270
Operating pressure,	kg/cm	9 to 12	9 to 12	9 to 12
Lifting height,	mm	1500	1525	1500
Ramp length Front, Rear,	mm mm	4500	5800	4500 1500
Ramp width	mm	700	820	700
Oil fill capacity,	ltrs	210	250	420

Unimeck Spark Plug Cleaner and Tester incorporates all features and devices necessary for efficient cleaning of the spark plug, and testing the same under simulated conditions prevailing in internal combustion engines. The Unimeck Spark Plug Cleaner and Tester consists of a sand blast unit for testing the plugs under high voltage (12 KV) and higher compression.

Specifications:

Description	Unit	Data
Moder	k	Unimeck 2000
Working Pressure	kgf/cm2	5-12
Spark plug used		M10, M14, M18
Input voltage	V	220
Electronic vibrator voltage	V	220/12
Ignition coil	V/KV	12/12
Overall dimensions LxWxH	mm	350x265x280
Weight	kg	12

Specifications:

Chassis	Powder coated sheet metal
Weight	20kg.
Height	508.0mm
Width	355.6mm
Depth	355.6mm
Timer	Digital Type: 0-99 min
Pressure Control	Semi Automatic
Switches	Heavy Duty Toggle Type
Controls	Specific to operation
Warning buzzer	Whistle
Power Source	220V AC/12V DC (Vehicle Battery)

Benefits to Vehicle:
• Pollution control-up to 50%
• Restore power by 40%
• Enhanced engine life
• Smoother vibration free ride

The salient features of our Nitrogen Generator Tyre Inflator are as follows:
• Fully automatic operation, requires only 5-10 minutes to start producing Nitrogen of desired purity
• Very compact in size, only electric powers needed to run the plant
• Low capital investment & nitrogen generation is very economical as compared to cylinder / liquid nitrogen
• We shall be using single stage filtration system before PSA Towers
• The Carbon Molecular sieves is of latest grade carbotech, Germany make, having 15 years guaranteed life & extra quantity of CMS ensures satisfactory plant performance over many years

It has various advantages as well. These are as follows:
• Nitrogen Gas does not expand due to heat. Therefore, in summer or at high speed, the tyre does not expand or bust due to increase in temperature
• The Nitrogen Gas does not contract due to low temperature. Thus the tyre rubber does not contract. Therefore, the life of tyre rubber is improved and the tyre does not skid or make noise on turns
• Nitrogen Gas is lighetr than air in weight. Therefore the vehicle fuel efficiency increases
• The size of Nitrogen Gas molecules is bigger than air. Therefore in case of puncture, the nitrogen gas escapes very slowly from the tyre thus giving more time to drive a punctured tyre
• Usage of Nitrogen Gas increases the tyre life by 20-25% & fuel saving by 6-10%. (Under standard test conditions)