Profile
UNIQUE AIR is formed to provide unique and committed solutions to various
compressed air problems. All our product have more than 30 years of
excellence and experience in design with well qualified and experience
people in manufacturing and after sales services, we manufacture a wide
range of compressed air accessories like REFRIGERATED AIR DRYERS, DESICCANT
AIR DRYERS, HEAT EXCHANGERS, CONDENSERS, AIR RECEIVERS, AIR CHILLERS,
FILTERS, MOISTURE SEPARATORS, AUTO DRAIN VALVES, WATER CHILLING PLANTS, etc.
Products
We fabricate and offer a wide range of refrigerated dryers, desiccant
dryers and other compressed air accessories for solving various problems in
compressed air handling. Manufactured with superior quality of raw materials
and in compliance with international quality standards, our product range
finds its usage in various industries, plants etc. The products we offer are
as follows:
Refrigerated Dryers (UA
series)
This type of Dryers, the saturated compressed air pre cooled in the Pre
cooler / Reheater by the out going cooled dry air with out any additional
energy requirement. The inlet air is further cooled in the Evaporator to the
required DEW point. The cold air is then reheated when it passes back
through the Pre cooler / Re heater.
Low temperature refrigerant is supplied to the Evaporator by a refrigerant
Compressor and condenser. The Thermostatic Expansion Valve and the Hot Gas
Bypass Valve match the operation of the refrigeration system to the
compressed cooling load. In the Evaporator, heat is transferred from the
compressed air to the refrigerant.
This process cools the air, reducing its capacity to hold the water vapor
and resulting in moisture condensation. The excess
vapor
condenses and is removed from the air system by a Separator and Automatic
Drain valve.
Our consistency in continuous improvement in design for renovating small
models results into TUBE-IN-TUBE type dryer. The copper tube-in-tube design
provides maximum surface area which results in optimum heat transfer.
MIMIC DISPLAY. ....Indicates
Schematic Diagram of dryer with Sensor
- Air circuit.
- Refrigeration circuit.
- Digital Display of Dew Point Indicator.
- Operation &Tripping Signals.
- System ON/OFF Control Switch.
Features & Advantages:
- Compact & Innovative Design
- Non-cyclic Operation
- Low Energy consumption
- Constant Dew Point
- Eco Friendly
- Customized air/Water cooled models
- Easy in Installation & Operation
- Low maintenance and Easy to service
- Load Handling Capacity 0 to 100% without Freezing
- Special Controls for Constant Evaporating and Condensing temperature
- Specialized Ranges from 0.5 kg/Cm2 to 80kg/Cm2
Desiccant Dryers (UHL
series)
Desiccant dryers are of various types based on its application on mass
transfer principle. Wet air having an inlet temperature of 40°C enters
the Prefilter to remove any oil and other contaminants which protects
desiccant's long life. Pre-filtered air enters into adsorption tower through
valves controlled by an electronic timer. Moisture is absorbed as the
pre-filtered air flows through the tower and the air then passes through an
after filter which removes any desiccant-dust carry over. While the other
absorber tower undergoes regeneration with a portion of dry air exits from
adsorption tower. Air is purged out and required dew point of (-) 40° C
is achieved
Features & Advantages:
- Fully Automatic for Continuous Operation
- Easy in installation
- Compact Design
- Simple & Reliable Construction
- Requirement of Heater is not there
- Low Maintenance Cost
- Electronic Control Panel for Reliable Operation
AIR RECEIVER
- Customized horizontal & vertical models
- For low & high pressure
- Various material of construction
- Different code of manufacturing
After cooler with Moisture
Separator
- Customized horizontal & vertical models
- Compact & efficient Design
- Fixed and removable tube bundle
- Low pressure drop
- High heat transfer efficiency
Air Filters (Pre filter, After filter)
- Borosilicate Glass fiber
- Sintered bronze
- Polymer candle
Electronic Drain Valve
- Automatic operation
- Removable strainer to avoid clogging
- Adjustable timer
- Push to test facility
RANGE & CAPACITIES
| Refrigerated Type Air Dryer Flow |
10 CFM to 10,000 CFM |
| Operating Pressure / Temperature |
0.5Kg / Cm. Sq. to 80Kg / Cm. Sq. / 30 degree C to 60
degree C |
| Dessicant Type Air Dryer Flow |
5 CFM to 500 CFM |
| Operating Pressure / Temperature |
7Kg / Cm. Sq. to 40Kg / Cm. Sq. / 40 degree C |
| Heat Exchanger |
30 CFM to 10,000 CFM |
| Moisture Separator |
30 CFM to 10,000 CFM |
| Air Filters |
20 CFM to 10,000 CFM |
| Oil Filters |
10 CFM to 3000 CFM |
| Air Receiver |
0.5M to 20M |
| Water Chilling Plant |
1.0 TR to 50 TR |
| Electronic Drain Valve |
3/8” to 3/4” BSP Conn |
Quality
We are committed to offer best quality products to our clients because
quality is something we can't compromise with. Therefore, we test whole
range of products at various stages of production on different parameters
like rigidity, pressure, venting & draining, dimensional stability of
component etc. All the quality tests are conducted in our QC&A (Quality
Control & Assurance) department, by our quality control professionals.
When products are cleared from QC&A department, they are ready for
packaging & dispatch. We deliver consignment safely and hassle free at
the desired destination within stipulated time frame.
Contact Us or Send
Online
Business Enquiry
Contact person: Mr. V. C. Johny
Unique Air Products
Office : E/22, Vrindavan Society, Opp. New Era School,
Makarpura
Vadodara - 390 100, Gujarat
(India)
Phone : +(91)-(265)- 2653501
Mobile : +(91)- 9825060338
Fax : +(91)-(265)- 2640266
E-mail :
uniqueairproduct@yahoo.co.in,
vcjohny@yahoo.com
Works: 898/3/3, GIDC, Makarpura,
Vadodara - 390 100, Gujarat
(India)
Fax : +(91)-(265)- 2640266
