Automatic Form - Fill & Seal Machine

We can easily design and manufacture form fill and seal Machine which is suitable for packing of various food products like powders, granules, tea, coffee, dhana dal, mehendi, tablets, namkeen, etc. The hopper in this Machine has been designed in such a way that it does not allow to stick powder to its walls and the material is continuously fed on to the disc without any lump formation.


TECHNICAL SPEICIFICATION (MODEL UA-010/UA-020)

SEALING TYPES	3 Side, 4 Side & Center Sealing
PACKAGINNG SIZE	L : 40-200 mm, Film W:60-350 mm
PACKING SPEED	40-90 Pouches/Minutes. Approx
PACKAGING RANGE	5 gms. To 500 gms.
MOTOR	¼ – ½ HP., 220V AC, Single Phase
HEATER LOAD	2 KW Maximum
DIMENSIONS & Wt.	L 750 x W 550 x H 1800 (mm)/450 Kgs.

Automatic Liquid - Fill & Seal Machine

This Machine is used for packing liquids, paste, jam, tomato ketchup, wine, shampoo, soya milk and mineral water, oil.


TECHNICAL SPEICIFICATION (MODEL UA-010/UA-020)

SEALING TYPES	3 Side, 4 Side & Center Sealing
PACKAGINNG SIZE	L : 40-200 mm, Film W:60-350 mm
PACKING SPEED	40-90 Pouces/Minutes. Approx
PACKAGING RANGE	5 gms. To 500 gms.
MOTOR	¼ – ½ HP., 220V AC, Sinlge Phase
HEATER LOAD	2 KW Maximum
DIMENSIONS & Wt.	L 750 x W 550 x H 1800 (mm)/450 Kgs.

Highly suitable for sticky material such as milk powder, ground spices, pesticides, mehndi, chemical and coffee, etc.

Automatic Form - Fill & Seal Product

This machine is highly suitable for Rice, Salt, Pulses, Atta, Spices, Tea, Bio-fertilizers, Namkeen, Detergent Powder and other similar products. This machine has hopper designed in such a manner that it dose not allow to stick powder to its wall and the material is continuously fed on to the disc without any lump formation.

TECHNICAL SPEICIFICATION (MODEL UA-040)

SEALING TYPES	3 Side, 4 Side & Center Sealing
PACKAGINNG SIZE	L : 40 to 300 mm, Film W:60 to 400 mm
PACKING SPEED	15 to 60 Pouches/Minutes. Approx
PACKAGING RANGE	5-20, 20-50, 50-100, 100-250, 250-500, 500-100 gms.
MOTOR	½ HP./ 220V AC,/ 50Hz./ Single Phase
HEATER LOAD	4 Side Seal(450 x 4 Nos.), 3 Side & Center Seal(150 x 2 Nos., 450x 2 Nos.)
DIMENSIONS & Wt.	L:800 x W:610 x H:1940 (mm)/490 Kgs.

Automatic Form - Fill & Seal Product

This machine is highly suitable for Rice, Salt, Pulses, Atta, Spices, Tea, Bio-fertilizers, Namkeen, Detergent Powder and other similar products. This machine has hopper designed in such a manner that it dose not allow to stick powder to its wall and the material is continuously fed on to the disc without any lump formation.


TECHNICAL SPEICIFICATION

SEALING TYPES	Central Seal with constant heat.
CENTRAL FIN SEAL	10 mm to 12 mm
LATERAL BOTTOM SEAL	10 mm to 12 mm
PACKAGINNG SIZE	L:100 - 300 mm, W:220 - 400 mm
PACKING SPEED	15-50 Pouches/Per Minutes. Approx
PACKAGING WEIGHT	100 gms, to 2 Kg.
TYPES OF FILLER	Cup Filler, Auger Filler, or Weight Filler
POWER CONSUMPTION	3 KVA, AC, Single Phase/Three Phase.
DIMENTIONS/ Wt.	L:2100 x W:700 x H:1690(mm) / 400 Kgs.

This machine is suitable for packing of pouches from 10 gm to 250 gms and 50 gm to 1 kg pouch. This machine is not only easy to operate but can easily pack all the pouches in a safe and hygienic manner leaving no space for any moisture or dust to enter within. Made using stainless and mild steel this machine is also cost effective.

TECHNICAL SPEICIFICATION UA-051

SEALING TYPES	3 Side, 4 Side & Center Sealing
PACKAGINNG SIZE	L : 50 to 350 mm, W : 75 to 400 mm
PACKING SPEED	15 to 60 Pouches/Minutes.
PACKAGING RANGE	50 gms. To 1000 gms.
MOTOR	220V AC,/ 50Hz./ Single Phase
HEATER LOAD	4 Side Seal(450 x 4 Nos.), 3 Side & Center Seal(150 x 2 Nos., 450x 2 Nos.)
DIMENSIONS & Wt.	L:1000 x W:1000 x H:2300 (mm)/600 Kgs.

Our semi automatic filling Machine is used for filling free flowing powders / granules in containers/pouches. These machines are highly suitable for filling various powders, granules, tea, coffee, dhana dal, tablets, namkeen, etc. These machines are easy to operate and have a unique shelf appeal with low waste disposal.


TECHNICAL SPEICIFICATION UA-060

FILLING SPEED	5 – 25 Pouches/Minutes. Depends upon the quantity
FILLING RANGE	500 gms, to 5 Kg.
MOTOR	½ HP., 220 VAC, Single Phase
DIMENSIONS/Wt.	L:700 x W:800 x H:2100(mm)/300 Kgs.

These machines are suitable for packing of biscuits, toys, chocolates, soaps, stationery items, ball bearing, syringes and other solid products. Easy to change for different pouch sizes they also have a photocell control system that can automatically adjust and correct the eye mark within / - 1.5mm.

TECHNICAL SPEICIFICATION

SEALING TYPES	Pillow type continues
WRAPPING SIZE	LENGTH	WIDTH	HEIGHT
-	100-350 mm	90-450 mm	10-100mm
SPEED	40-200 Packets/Minutes (Depending upon the size)
PACKAGING MATERIAL	Any Heat sealable laminated paper.
POWER CONSUMPTION	2.5 kw, DC. (with DC Drive) Single Phase.
DIMENSIONS/Wt.	L-3600, W-1500, H-1800 (mm)/450 Kgs.

Suitable for mineral water, medical syrups, juice and chemicals this Machine is also easy to operate and can be designed as per the technical specifications provided by the client. This Machine also has a unique shelf appeal and low waste disposal rate. This Machine is easy to install and widely demanded.


TECHNICAL SPEICIFICATION UA-011

FILLING RANGE	2 ml. To 1 Ltr. (By suitable syringe)
OUTPUT	1200 to 4500 bottle/hour
POWER	2kw., 440V AC., 3 Phase, 50 Hz
DIMENSION	L:3500, W:1165, H:1165, (mm)

As the name suggests this Machine is suitable for all types of bottle caping / sealing. This Machine is also rugged in construction as well as robust in design. Fabricated according to the specifications provided by the client all our machines are easy to install and also widely demanded in the global markets.


TECHNICAL SPEICIFICATION UA-022

OUTPUT	2400 to 3600 sealing/hour.
BOTTLE SIZE	22 to 85 mm dia. 50 to 300 mm hight
POWER	2 K.W., 440V AC., 3 Phase, 50 Hz.
NET WEIGHT	350 kg. (Approx)

Highly suitable for shrink wrapping of all types of products this machine has a variable conveyor speed with digital temperature controller. It also has a quartz infrared heater and consumes low electricity. With silicon sleeves on conveyor rods this machine is easy to install and maintain. This machine is widely demanded and used for various packaging purposes.

FEATURES :

• Variable conveyor speed.
  
• Digital Temperature controller
  
• Quartz infrared heater
  
• Low Electricity Consumption
  
• Silicon Sleeve on conveyor rods.

This machine is suitable for mixing wet and dry powders. All contact parts of the machine is made of stainless steel and mild steel. The gear box has mechanical fitting arrangement. This machine is easy to operate and provide increased production without much expense and manpower. This machine also has a unique shaft appeal with low waste disposal.