We offer broad range of soil testing machines

• Automatic Compaction Hammer
• Consolidation Apparatus
• California Bearing Ratio Apparatus
• Field C.B.R. Test apparatus
• Direct Shear Apparatus
• Large Motorised with 72 speeds
• Liquid Limit Device
• Load Frames
• Rapid Moisture Tester
• Soil Trimmer
• Soil Lathe Swell Test Apparatus
• Unconfined Compression Tester

Technical specification of above mentioned apparatus and equipment:

Automatic Compaction Hammer

• Motorised for 100 mm and 150mm dia moulds• Two rammer 2.6 Kg and 4.89 Kg
• 220v, single phase, A.C. supply

Consolidation Apparatus

• Loading unit max. capacity 20 Kg/cm
• Available in single, three and six gang
• Water reservoir with plastic tube and drain cock

California Bearing Ratio Apparatus

• Load Frame• Single Speed 1.25 mm/min
• Three speed 1.25,1.5 & 2.5 mm/min
• Hand operated four-pillar type
• Made of gunmetal and MS
• High sensitivity proving ring 30Kn capacity

Field C.B.R. Test apparatus

• Consist of Loading jack with U bracket
• Capacity 100 Kn
• Swivel head & penetration piston
• High sensitivity proving ring with 50Kn capacity

Direct Shear Apparatus

• Hand operated Loading unit
• Shear load Capacity 2Kn
• Stress load 3 Kg/cm²
• Shear box assembly for specimen size 60x60x26 mm
• High sensitivity proving ring
• Shear box assembly
• Shearbox housing
• And many More

We offer comprehensive range of rock testing equipment.

The apparatus we offer for rock testing includes

• Core Drilling Machine
• Rock Cutting Machine
• Rolomatic Rock
• Cutting Machine
• Rock Toughness Tester
• Slake durability and Cutting & Polishing Machine

Technical specification of aforementioned apparatus and equipment are as follows:

Core Drilling Machine

• Produces cores up to 150mm diameter
• Portable basic unit
• Electrically operated on 440 Volts, 50 Hz
• Three phases A.C.Supply

Slake durability

• Motor drive with speed 20 rev/min
• Two test drums with 140 mm dia & length 100mm
• Two perspex water troughs
• Operated on 220v, 50h

Cutting & Polishing Machine

• Blade diameter 250mm
• Operating power: 2HP
• Operates on 440v, 3 phase
• Blade RPM 2200(approx)

We offer wide gamut of apparatus that find their applications for metal testing. The wide spectrum of equipment that we provide includes Abrasive Cut off Machine, Bending Test Apparatus for Wires, Fatique Testing Machine, Mounting Press, Pendulum Impact Testing Machine, Polishing Machine, Torsion Testing Machine, Wire Torsion, Wire Wrap Testing, Spring Testing Machine, Tensile Testing Machine and Cutting & Grinding machines. Technical specification of aforementioned apparatus and equipment are mentioned below:

Abrasive Cut off Machine

• Offers wet & dry operations
• Cut upto 200mm deep
• Speed:2100 to 2200 r.p.m
• Operated on 440 volts

Fatique Testing Machine

• Bending moment: 5-100 kg• Griping diameter: 12mm
• Testing diameter: 8 mm
• Rotating speed: 4200 rpm
• Power: 2 HP

Torsion Testing Machine

• Capacity range: 6 to 600 kgm
• Width: 25 to 70 mm
• Power: 0.5 to 7.5 hp

Wire Torsion

• Motor output of 30, 60 & 90 rpm
• Electrically operated on 400-440v
• Distance between rotating & non-rotating chuck:1-500 mm
• Available in two models with wire range of 1-5 mm & 4-10 mm

Tensile Testing Machine

• Power requirement varies with differnt capcities
• Traverse speed 100-500 mm/min
• Grip separation in between 25mm to 1000mm

We offer wide range of testing equipment that is used for concrete testing. Our multitude of apparatus includes Beam Flexture, Beam Testing Load Frame, Tile Flexture Testing Machine, Permeability (MORTOR), Vee Bee Consistometer and Vibrating Table.3. The technical specifications of above mentioned equipment’s are given below:

Tile Flexture Testing Machine

• Available with or without lead shots
• Flowing rate of 45 to 55 kg/min
• Automatic stop when specimen brokes

Permeability (MORTOR)

• Used to determine the permeability of cement mortar
• Comprise of brass/gunmetal cell
• Regulates pressure from 0-15kg/cm sq
• Includes a measuring cylinder 500cc

Vee Bee Consistometer

• Determine the workability of concrete
• Operated on 220v, single phase

Vibrating Table.3

• Used for proper compaction of cement concrete moulds
• 50cm x 50cm of table top
• 440 Volts supply

We offer various types of testing equipment for cement tests. The equipment’s used for cement testing includes Flow Table, Heat of Hydration, Jolting Test Apparatus, Planetary Mixer, Permeability (Pozolona) and Vibrating Machine.
 
Flow Table

• Determines the flow of Portland cement concrete• 76.2cm tabletop
• Made of solid brass/gun metal
• Available in three models CT-25, 26 & 27

Heat of Hydration

• Determines heat of hydration of cement
• Operated on 220v, 50Hz
• Includes Beckman thermometer, constant speed stirrer & funnel

Jolting Test Apparatus

• Cam rotates at the rate 60rev. /min
• Comprise of mould & hopper
• Operated on 230v, single phase, A.C. supply

Planetary Mixer

• Used for mixing cement pastes, mortars and pozzolanas
• Speeds of 140 5rpm & 285 10rpm
• Operated on 230 Volts, 50 Cycles, Single phase, A.C.supply

Permeability (Pozolona)

• Comprises of rectangular table
• Cam rotates at 60rev/min
• Operated on 230v, single phase, AC supply

Vibrating Machine

• Frequency of vibration 12000 400 per/minute
• Operated on 220 V, 50 Hz, single phase supply

We offer well designed testing equipment used for aggragate testing. Our various agggragate testing equipment includes Aggregate Impact Testing Machine, Ball Mill, Dorry Abrasion, Deval Abrasion Testing Machine, Jaw Crusher, Accelerated Aggregate Polishing Machine, Sieve Shaker Motorised, Los Angels Abrasion Testing Machine and Tile Abrasion Testing Machine. Some of the important specifications of abovementioned equipment’s are given below.

Aggregate Impact Testing Machine

• Rigid framework
• Freefall adjusted at 380mm
• Hammer is available with locking arrangement

Ball Mill

• Hollow drum mounted on a sturdy frame on ball bearing• Drum rotation speed 30-33 rpm
• Operation on 440 Volts, three phase A.C.Supply

Dorry Abrasion

• Circular disc mounted on a reduction gear
• Come with large & small trays
• Available with revolution center
• Operation on 220v, 50 Hz

Deval Abrasion Testing Machine

• Consists of two hollow cast iron
• Shaft rotated at 30-33 rpm
• Operated on 440v, 50Hz, 3 phase supply

Jaw Crusher

• Speed up crushing of materials
• Compact & rugged design
• Available in three different models
• Capacity, Jaw size varies in all

Accelerated Aggregate Polishing Machine

• Road wheel for clamping
• Hopper unit for feeding emery powder
• Water reservoir & mould for sample preparation
• operated on 220v, 50 Hz, single phase supply

We offer comprehensive range of asphalt testing equipment includes Centrifuge Bitumen Extractor, Core Drilling Machine, Ductlity Testing Machine, Marshall Stability Testing Machine, Marshall Automatic Hammer, Planetary Mixer Bitumen and Film Stripping Device (Electrically Operated). Some of the common characteristics of our asphalt testing equipment are given below:
 
Centrifuge Bitumen Extractor

• Aluminum rotor bowl mounted on a vertical shaft
• Filter paper disc is pressed between the rotor bowl and cover plate
• Electrically operated on 220/230 v, single phase

Core Drilling Machine

• Produces cores up to 150mm dia• Electrically operated on 440 volts, 50 Hz

Ductlity Testing Machine

• Thermostatically temperature controller
• Come with moving carriage, electric motor
• Comprises electric pump circulator & heater
• Operated on 220 v, single phase

Marshall Stability Testing Machine

• Capacity 50 KN
• Rate of strain 50.8mm/min
• Operated electrically at 220/230 v, single phase

Marshall Automatic Hammer

• Rugged construction
• Lifts the 4.53 kg compaction weight
• removable foot for preheating

Planetary Mixer Bitumen

• Mechanical Mixer of 0.02 cu mt. Capacity
• Stainless steel mixing bowl with 6L capacity
• Operated on 220/230 v in single phase
• Equipped with heating jacket

Film Stripping Device (Electrically Operated)

• Disc rotation of 100rpm• Come with time switch
• Operated on 220V in single phase

Marshall Automatic Compactor Item Code: UAPT-705 The ruggedly constructed machine eliminates laborious process of hand compaction and so results in a very even degree of compaction. The unit incorporates a compaction pedestal; constructed to satisfy ASTM D-1559 and BS 594 comprises a hardwood block secured to a concrete base by a 300mm square x 25mm thick steel plate. The drive mechanism lifts the 4.53 kg compaction weight to the correct height of 457mm and allows free fall.

Marshall Stability Testing Machine conforming to specification as laid down in accordance to ASTM D-1559 consists of followings:

Loading Frame

• Capacity 50 KN (5000 kgf.)
• Electrically operated having constant rate of strain 50.8mm/minute 
• Suitable for operation on 220/230 Volts
• Single phase A.C. Supply
  

Compaction Mould

• Complete with interchangeable collar and base plate duly chromium plated as per latest code.

Sample Extractor

• Used to extract sample from mould consists of a thrust plate and loading bar.

Compaction Pedstel

• Consists of compaction hammer having 4.5 kgs mass with a free fall of 457mm used with compaction pedestal comprises a wooden block capped with a steel plate and mould assembly

Breaking Head

• Consists of upper and lower cylindrical segment of test head having inside radius of curvature 5cm.

Proving Ring

• Stress measuring proving ring capacity 30kn made out of special alloy steel to gives maximum repeatability as per I.S. 4169 fitted with dial gauge least count 0.002mm of ISI certification mark IS 2092 with calibration certificate in polished wooden box.

Flow Measurement Dial Gauge

• Least count 0.01mm x 25mm travel of ISI Certification mark IS 2092.Complete outfit as above.