We are instrumental in offering a qualitative range of Ball valves. These are manufactured using high grade material that is procured from dependable vendors. Our range of Ball valves conform to the ASTM, ANSI, AWWA, DIN, JIS, UNI, BS, IS standards and norms. These are used to blank off the ends of piping, valves and pressure vessel opening.
 
Some of its detailed specifications are mentioned below:
 

• Face to Face: ANSI 16.10/DN
• Flange Ends: ANSI B 16.5, BS 10 / DN
• Manufacturing Standard : BS5351 & BS 5159
• Testing & Inspection Standard : BS 5146 / BS 6755

 
The details of the Test Pressure are tabulated below:

Bpdu(Hydraulic)	31Kg/CM2	76Kg/cm2
SEAT(Hydraulic)	23Kg/cm2	56Kg/cm2
SEAT(Hydraulic)	7Kg/cm2	7Kg/cm2

We specialize in offering a qualitative range of Forged Steel Valves. These are available in 3 specifications that are GATE, GLOBE & CHECK valves. Our forged steel valves comply with various standards of repute such as ASTM, ANSI and AWWA. Some of its additional features are:

• DESIGN: API 602/BS 5352
• TESTING: API598/BS 6755 Part I
• MATERIAL: ASTM Specifications Moulded pre-compressed graphite ring packing varieties of trim combination.

Optional:

• Alternate investment cast valves in SS.
• Welded on flanged ends
• Seal welded bonnet, extended bonnet and bellow sealed bonnet

The material that is used for the construction of our Forged steel valves is mentioned below in detail:

S.No	Description	A105	F304/F316
1	Body	A105	A182 Gr.F304/F316
2	Seat Ring	A276 TP410/A217 Gr. CA 15	INTEGRAL/A276 TP 304/316
3	Plug/Disc/Wedge	A276 TP410/A217 Gr. CA 15	A276 TP304/F316
45	Stem	A276 TP 410	A276 TP304/F316
6	Gasket	SW SS + GRAPHITE	SW SS + GRAPHITE
7	Bonnet/Cover	A105	A182 Gr. F 304/F316
8	Joint Bolt	A193 GR. B7	A193 Gr. B7
9	Gland Packing	GRAPHITE RINGS	GRAPHITE RINGS
10	Gland Bush	A276 TP410	A276 TP 304/316

Avail from us, a wide range of Gate valves that are used for regulating flow in pipe line and are utilized in full open or full close system. The valve has a gate that allows the flow when stem is raised and is stopped when it is lowered. Our range of Gate valves are also used in high pressure lines such as steam turbines.
 
The detailed specifications of the Gate valves are mentioned below:

• Manufacturing Standard: API 600/BS1414
• Face to Face: AS PERANSI B 16.10
• Flange Ends: AS PER ANSI B 16.5
• Thrust bearing are approved for size 14" and above
• Stellite facing on seat surface is done is specified in p.o.
• Seat rings wedges are made out of aisi 410 bars up to 2" & cs with 13% cr
• Steel facing for size above 21/2"

Our team of experts perform hydrostatic and Air test pressure range of gate valves. The details are mentioned below:

	#150	#300
BODY	32	79
SEAT	22	58
SEAT	7	7

The material, which is used for constructing our range of Gate valves, is mentioned below in detail:

S.No	Description	Web
1	Body(a)	A216 Gr.WCB
2	Seat Ring (b.c.)	WCB+ 13% Cr. STEEL / A217 Gr. CA 15

We provide our clients with qualitative Y Type Global valves. Our global valves are available in various types such as FORGED STEEL GATE, GLOBE & CHECK VALVES. These are manufactured using quality material and are designed in compliance with the ASTM, ANSI, AWWA, DIN, JIS, UNI, BS, IS standards and norms. The detailed specification is mentioned below:

• Design: API 602/BS 5352
• Testing: API598/BS 6755 Part I
• Material: ASTM Specifications Moulded pre-compressed graphite ring packing varieties of trim combination

Optional specifications:

• Alternate investment cast valves in SS
• Welded on flanged ends
• Seal welded bonnet, extended bonnet and bellow sealed bonnet

The material used for constructing Y type globe valves is mentioned in detail below:

S.No.	Description	A105	F304/F316
1	Body	A105	A182 Gr. F304/F316
2	Seat ring	A276 TP410/A217 Gr. CA 15	INTEGRAL/A276 TP 304/316
3	Plug/Disc/Wedge	A276 TP410/A217 Gr. CA 15	A276 TP304/F316
4	Stem	A276 TP 410	A276 TP304/F316
5	Gasket	SW SS + Graphite	SW SS + Graphite
6	Bonnet/Cover	A105	A182 Gr. F 304/F316
7	Joint Bolt	A193 GR. B7	A193 Gr. B7
8	Gland Packing	Graphite Rings	Graphite Rings

We are one of the leading manufacturers of Safety Valves. These provide relief from an over pressure condition automatically, and effectively ensuring the maximum discharge rates and protects expensive equipment's from dangerous high pressure. Some of its salient features are:

• Corrosion resistant
• Durable
• Available in customized specifications 

We are one of the leading manufactures of Butterfly valves that are primarily employed with lap joint stubs. Our butterfly valves are available at industry leading prices. The combined initial cost of the two items is approximately one-third higher than that of comparable welding neck flanges.

The detailed specifications of our range of Butterfly valves are mentioned below:

• Pressure Class: PN-10
• Manufacturing STD. : BS 5155/AP1609
• Body Material: WCB/IS 210 GR.20-25/CF8/CF8m
• Disc Material: WCB/IS 210 GR.20-25/CF8/CF8m
• Spindle Material: AISI 410/304/316
• Lining Material : NITRIL/EPDM/HYPALON/ VITON/ BUTYLE/ NEOPENE
• 'O' Ring Material : NITRIL
• Pin Material : AISI304
• Lever Material : IS 210 FG200

Technical Data

Size	B	L	H
50	43	115	85
80	52	165	100
100	52	190	120
150	56	240	160
200	60	280	200
250	68	340	230
300	78	375	260
352	95	410	300
400	95	430	310
450	115	450	310
500	125	500	435

We are instrumental in offering a comprehensive range of Stainer valves that are manufactured using high grade material. These are designed in compliance with the ASTM, ANSI, AWWA, DIN, JIS, UNI, BS, IS standards and norms. The detailed specifications of these valves are mentioned below:

• Face to Face: AS PER DIN ND-40 TYPE
• End Connection: AS PER ANSI B 16.5
• Manufacturing Standard: BS 1873
• Inspection Standard: BS 5146

The hydrostatic test pressure (Kg/cm3) details are as follows:

Class	Body
150	32

These are designed using high grade material. The information regarding material is mentioned below:

Part Name	Material
Body	ASTM-A216 GR. WCB
Screen	SS 304
Gasket	Spiral Wound SS 304 C.A.F.
Cover	ASTM A 216 GR. WCB
Cover Stud	ASTM A 193 GR. B7
Cover Stud Nut	ASTM A 194 GR. 2H

We provide our clients with qualitative Y Type Global valves. Our global valves are available in various types such as FORGED STEEL GATE, GLOBE & CHECK VALVES. These are manufactured using quality material and are designed in compliance with the ASTM, ANSI, AWWA, DIN, JIS, UNI, BS, IS standards and norms. The detailed specification is mentioned below:

• Design: API 602/BS 5352
• Testing: API598/BS 6755 Part I
• Material: ASTM Specifications Moulded pre-compressed graphite ring packing varieties of trim combination

Optional specifications:
 

• Alternate investment cast valves in SS
• Welded on flanged ends
• Seal welded bonnet, extended bonnet and bellow sealed bonnet

The material used for constructing Y type globe valves is mentioned in detail below:

S.No.	Description	A105	F304/F316
1	Body	A105	A182 Gr. F304/F316
2	Seat Ring	A276 TP410/A217 Gr. CA 15	Integral/A276 TP 304/316
3	Plug/Disc/Wedge	A276 TP410/A217 Gr. CA 15	A276 TP304/F316
4	Stem	A276 TP 410	A276 TP304/F316
5	Gasket	SW SS + Graphite	SW SS + Graphite

We offer Swing check valves that are manufactured using qualitative material. These are designed as per the international quality standards and norms. Our swing check valves are used in chemical process plants, water purification plants, petrochemical industries where the processed fluid is made to flow into a low-pressure area.

Specifications

• Manufacturing standard: BS 1868
• Testing & inspection standard: BS 5146
• Face to face: as peransI B 16.10
• Flanges as per ansi B 16.5
• Stellite on seat surface is done as
• Specifiedin p.o.

	150#	300#
Body (Hydraulic)	32Kg/CM2	79Kg/cm2
Seat (Hydraulic)	22Kg/cm2	58Kg/cm2

Material

Part Name	Material
Body	32Kg/CM279Kg/cm2
Cover	22Kg/cm258Kg/cm2
Seat Ring	ASTM-A216 WCB
Disc	ASTM-A216 WCB
Bracket	CS 13% CR. Facing
Hinge	CS 13% CR. Facing
Hing Pin	SS (AISI 410)
Gasket	CAF/SPRIAL WOUND SS 304 Filled with Asbestos
Stud & Nuts	ASTM-A193 GR. B7/A-194 GR. 2H

We offer a wide range of wafer type check valves that are designed as per the ASTM, ANSI, AWWA, DIN, JIS, UNI, BS, IS standards. Wafer Type check Valves can be applied various type of fluid.

Specifications:

• Manufacturing Standard: API 6D/API/ASME B 16.3
• Face to Face: API 6D/API 598
• Material: ASTM Specifications soft seat for tight shut-off, lesser weight, smaller size and lesser force to open.
• Optional: Replacement of conventional check

 
Dimensions

Size DN(mm)	50	65	80	100	150	200	250	300
T F/F mm	19	19	19	19	19	29	29	38
B DIA mm	104	123	136	174	222	279	339	409
C DIA mm	30	40	52	71.5	114	157	195	240

We provide our clients with qualitative pressure reducing valves that are manufactured using high grade material. These are available with varying Diaphragm types and Piston types. Our Pressure reducing valves are applicable to various mediums such as oil and water. These are provided with high temperature resistant reinforced diaphragm to withstand hot fluid.

 

 

Our array of control valves are widely appreciated for their performance and durability. Manufactured with the aid of latest technology, the control valves are used for controlling the flow of gasses and liquids.