Pumps

Submersible motor pump in multi-stage construction with radial or mixed flow impellers is coupled with oil or water filled, single/three phase submersible motors. Pumps with SS jacket are also available up to 100 mm diameter. This is suitable for horticulture, irrigation, housing, building services and farm houses, ornamental fountains etc.

Well diameter	D	min. 75 mm
Capacity	Q	up to 900 m3/hr
Head	H	up to 360 m
Motor rating	P	up to 110 kw
Speed	N	2900 rpm

It is a vertical, monobloc pumpset, free flow impeller of two sizes, 10 and 30 motors with IP 68 protection, 1Ø motor with built-in thermal overload protection and float switch, bi-directional mechanical seal. It is suitable for pumping surface water, rain water, waste water containing solids, drainage of sumps liable to flood, agricultural pits and canals.

Pump Size	DN	50 mm
Capacity	Q	up to 29 m3/hr
Head	H	up to 16 m
Motor Rating	P	up to 1.1 kW (1Ø) up to 1.5 (3Ø)
Temperature	T	up to 40° C

Ama-Drainer 300 & 400 series is a vertical fully floodable submersible motor with in built swing check valve. Jacket cooled single phase motor is integrated with temperature switch. Float switch are for automatic operation. It is suitable for lowering surface water level, transfer of water, agricultural pits, extraction of water from rivers & reservoirs, sprinklers in gardens, drainage of cellars / basin.

Pump Size	DN	40 mm
Capacity	Q	up to 550 lpm
Head	H	up to 19 m
Motor		Available in 1Ø & 3Ø
Temperature	T	up to 50° C

It is a single stage, submersible, centrifugal pump of closed coupled (monobloc) construction. It is suitable for handling municipal and industrial waste water. Three types of impellers are available to suit a variety of needs - E (single vane), K (non-clog two channel) & F (free flow) in transportable and stationary installation.

Pump Size	DN	65 & 100 mm
Capacity	Q	up to 200 m3/hr
Head	H	up to 24 m
Discharge pressure	P	up to 9.5 kW
Temperature	T	up to 70° C
Speed	N	up to 2760 rpm

KRT is a single stage, submersible centrifugal pump of closed coupled (monobloc) construction. It is used for pumping all types of sewage and effluents in water treatment and industry especially untreated sewage, with long fibers and solid substances, liquids containing air and gas as well as raw, activated and digested sludge.

 

Pump size	DN	up to 350 mm
Capacity	Q	up to 3000 m3/hr
Head	H	up to 55 m
Motor rating	P	up to 160 kw
Temperature	T	up to 40° c

It is a horizontal, end suction, centrifugal, radially split volute casing pump in backpull-out design fitted with single stage radial impeller. This is suitable for handling clear liquids in applications for water supply, irrigation, air-conditioning, fire fighting, auxiliary process in paper, cellulose, sugar, food and textile industries.

Pump Size	DN	32 to 150 mm
Capacity	Q	up to 700 m3/hr
Head	H	up to 100 m
Discharge pressure	p	up to 16 bar
Temperature	T	-30 to 160° C
Speed	N	up to 3600 rpm

It is a multi-stage, vertical inline high-pressure centrifugal pump in ring-section design. It is suitable for general water supply, sprinkling, irrigation and pressure boosting system, warm water, hot water and cooling water re-circulation, boiler feed systems, domestic water supply systems and washing plants.

Water Pressure Boosting System is fully automatic pressure boosting unit available in three variants - K, V & VP with 2 to 6 vertical high-pressure pumps and fully electronic control of the required supply pressure with two standard volt-free contacts for fault indication. It is suitable for residential buildings, hospitals, office buildings, hotels, departmental stores and other applications.

Capacity	Q	up to 630 m3/hr
Head	H	up to 160 m
Temperature	T	up to 70° C
System Discharge pressure	P	10 & 16 bar
Inlet pressure	N	Up to 10 bar
Supply voltage		3 Phase, 415 Volts, 50 Hz
Drive		2 Pole electric motor

Centribloc is a mini monobloc pumpset in compact design with superior hydraulic component design. It is a pump having suction capacity up to 6 m. It is available in 2 motor capacities. It is suitable for pumping of water to overhead tanks, in bungalows, fountains, car washing etc.

Pump size	DN	2 models
Capacity	Q	150 lpm
Head	H	up to 30 m
Motor rating	P	up to 1 hp

Hudrobloc is a mini monobloc pumpsets in compact design. It is available in 3 models- hydrobloc ( standard range ), hydrobloc deluxe (medium range) & hydrobloc delite (premium range). It is suitable for pumping of water to overhead tanks, in bungalows, fountains, car washing etc.  

Size	DN	40 to 300 mm
Pressure	P	up to 16 bar
Temperature	T	-10 to 110°C

Hydrostar is a super suction monobloc pumps in compact design. It is available in 3 models- Premium, Standard and High speed design. Pumps are designed to handle wide range of voltage fluctuations and suction capacity up to 8 m. It is suitable for pumping of water to overhead tanks, in bungalows, fountains, car washing etc.

Pump Size	DN	3 models
Capacity	Q	30 lpm
Head	H	up to 30 m
Motor rating	p	up to 0.5 hp

Hudrobloc is a mini monobloc pumpsets in compact design. It is available in 3 models- hydrobloc ( standard range ), hydrobloc deluxe (medium range) & hydrobloc delite (premium range). It is suitable for pumping of water to overhead tanks, in bungalows, fountains, car washing etc.

Pump size	DN	3 models
Capacity	Q	67 lpm
Head	H	up to 48 m
Motor rating	P	up to 1 HP