Our range of FRP cooling towers are manufactured using glass reinforced plastic and are available in standing bottle type & square type models. Being a mechanical type counter flow tower, our products intakes air from the bottom & discharges the waste heat from the top.

The bottle type tower casing comes filled with Honeycomb type of PVC FILLS where the water distributor sprinkler is fixed on the top of inlet pipeline & helps in even distribution of hot water over the Honeycomb fill media. The use of superior engineering allows the cold air to meet cold water at the bottom of infill that provides maximum evaporation & heat transfer in the infill. We have the capability to assemble small capacities towers at factory premises, whereas higher capacities towers are assembled on site which helps in avoiding excess transportation cost. Some of the features of our products include:

Features:

• More compact and light in weight.
• Known for consuming less power.
• Long-lasting and durable.
• Needs low maintenance.
• The use of hot dip galvanized structural & stainless steel fasteners in the FRP Towers makes them corrosion free.
• Adjustable pitch.
• Our range includes 5 to 600 TR in single cell & multiple cells.

Our range of Cross flow FRP cooling towers are manufactured using glass reinforced plastic and are available in standing rectangle type models. Being a mechanical type cross flow tower, our products intakes air from both sides and discharges the waste heat from the top.

The tower casing comes filled with Honeycomb type of PVC FILLS with 'S' type drift eliminators on both sides and the water is distributed with spiral target nozzles from the top of inlet pipeline & helps in even distribution of hot water over the Honeycomb fill media. We have the capability to assemble small capacities towers at factory premises, whereas higher capacities towers are assembled on site which helps in avoiding excess transportation cost. Some of the features of our products include:

Features:

• More compact and light in weight.
• Known for consuming less power.
• Long-lasting and durable.
• Needs low maintenance.
• The use of hot dip galvanized structural & stainless steel fasteners in the FRP Towers makes them corrosion free.
• Adjustable pitch.
• Our range includes 5 to 750 TR in single cell & multiple cells.

We are a leading manufacturer of timber type cooling towers. It is mechanical strength, durability and high efficiency. Manpower with vast specialized experience in cooling tower manufacturing is back bone of the organization. We have with us persons who have been entirely responsible from concept to final product manufacturing. We have major time tested development that has been incorporated in standards. Our CCT timber cooling towers are atmospheric cooling tower and mechanical cooling towers.

Atmospheric towers are only for smaller capacities and mechanical draft towers are for higher range. Induced draft cooling towers are efficiency and popular due to sucking of air from the tower and exhaust at the top or side. The timber cooling towers are made out of pine or chirr wood after properly seasoned and chemically treated with arsenic chromite to with stand its life against biting, fungus and termite etc. Boiler waterproof plywood [marine grade], asbestos, treated woods, ss or hot dip. Galvanized bolt and nuts are used in the timber cooling towers. Marine grade plywood is used for hot water chamber in timber tower. The water is distributed by even distribution nozzles by gravity. So no extra pumping cost.

Timber Cooling towers are useful for chemical plants, air conditioning plants, induction furnace, injection moulding machine, chilling plants, oxygen plants. diesel generating sets and heat exchangers. And also for steel industries, cement industries, chemical industries, and water effluent treatment industries.

Our range of dry cooling towers use the superior air-cooling technology, eliminating the needs of excess water evaporation for operating the cooling tower. Further the direct induction of process/engine water/oil from the system to dry cooling tower eliminates the need of mid-heat exchangers, providing zero maintenance & long-lasting services to our clients.

Features:

• Tubes wounded with integral aluminium or copper wires/strip type fins that helps in increasing heat transfer areas.
• Core area [Heat Transfer area] cooled with intake cooling fan using counter flow method maximizes the heat transfer efficiency.
• All heat transfer areas are easily approachable allowing easy periodical cleaning & maintenance.
• The use of heat Exchanger system in cooling oil/water saves energy and maintenance costs.
• Various hot media can be simultaneously cooled by same fan using sectionalized parts.

We offer a high quality RCC Cooling Towers which are used in various industries. Our RCC Cooling Towers have the following specifications:

Type	Both Cross and Counter flow
Fan Cylinder	RCC Construction / FRP (Optional)
Fan Assembly	Epoxy based FRP multi bladed fan assembly. Light and durable, low vibration, easy maintenance.
End wall Casing & Louver	RCC Construction.
Stair Case	RCC Construction with tubular hand railings.
Motor	Reputed make TEFC, weatherproof, IP - 55 Enclosure 415V / 3PH / 50Hz. / 1440 RPM.
Gear Box	Spiral Bevel type Gear.
Drive Shaft	Tubular type single span drive shaft fitted with flexible coupling with bushes at both end. Drive shafts are made of MS with HDG / SS for special case.

We offer to our clients a wide range of heat less compresses air driers that are designed for establishing equilibrium with their surroundings & delivering dry & clean air needed for pneumatic instrumentation or for critical applications.

The automatic timer fitted in our driers help in diverting incoming air to another tower, with one tower engaged in drying the air and the other tower working towards regenerating the desiccants. Further the purged air helps in removing the absorbed moisture from the absorbent desiccant. With ready availability of spares for meeting customer's break down problem, we offer them in capacities ranging from 5CFM to 5000 CFM.

Our range of finned tube heat exchangers are built on specialized European technology that helps our products to with stand higher internal pressure. Further the larger heat transfer area enables us to further improve the efficiency of our heat exchangers.

They are manufactured using various materials meeting the TEMA standards like seamless or ERW tubes in copper aluminium, mild steel, Brass, Aluminium brass, cupro Nickel etc are used. The welding or expansion of the tube ends allows it to with stand the pressure up to level of 1000 PS1 pressure. We also carry out various quality checks including Pneumatic, X-Ray Hydraulic, penetration testing and other tests confirm and to the international quality standards. As per the clients requirements, we also carry out third party inspections from agencies like Lloyds Register, RITES, IBR and Engineers India.

We offer to our clients a wide range of precision engineered spare parts that are known for their superior performance and compatibility features. The range offered by us includes sprinkler, nozzles, motor, fan, splash bar, fills.

We are manufacturing and supplying high quality Heat Exchanger spares which includes plates and coolers, gaskets, air compressors etc. These Heat Exchanger spares ensures reliability of our raw material source and ensures the quality of our products throughout the production line.