We offer lab valley beater which are used in laboratory for beating of pulp under standardized conditions. to determine the behavior of pulp when subject to definite beating schedule. This beater is suitable for routine checking of pulp in laboratory. Net volume 25 liters of 680 g bone-dry pulp at 2-2.5% concentration. Beater roll speed 500 rpm. Motor with V belt drive provided.

We offer laboratory beater (PFI Mill Type) which is of high precision & best beater for processing pulp prior to formation of hand sheets, in order to determine the behavior of pulp when subject to definite beating schedule. This beater is ideally suitably for research purpose and routine checking of small quantity of pulp in laboratory. Capacity 5 – 40 gm of oven dried pulp with consistency of 5 – 50%, beating time 2-10 minutes. Beater roll and bed plate independently driven. Roll revolution counter, Variable beating pressure and variable peripheral speed beater roll/housing.

We offer Laboratory Crush Tester which is of high precision and of high quality .

A. Constant Speed Lab Crushing Tester (Beam deflection method) motorized operated with dial indicator and peak pointer - For determining the edgewise ring crush or flat crush resistance of corrugated board, paperboard, paper & plastics etc.
Load range: 0-50 OR 0-100 Kg.
Accuracy within 20% to 80% of the normal range of deflection.


B. Electronic Lab Crush Tester – With digital readout: For accurate testing of paper, paperboard, solid fiberboard & corrugated board for RCT, ECT, CCT and FCT test and its components as well as performing compression test on all small packages. Accessories provided for RCT testing only
Load range: 0-50 and 0-500 Kg. (5000 N.)

We offer Digital Bursting Strength Tester (Burst–O-Matic) – Uniform Hydraulic Pressure produced through electric motor and gear with fully automatic control for pneumatic clamping of specimen and testing cycle. Complete with memory for retaining peak value, automatic or normal zero setting, overload and over protection facilities.

Semi-Automated Sheet Former – For producing the pulp sheet rapidly for physical strength tests. In comparison to the standard sheet former, this apparatus reduces the time factor, increases the output, improves the reproducibility, reduces the operator’s influence and fatigue without detriment to the final product. Stirring in the apparatus is an automatic function by use of compressed air, whilst couching is effected by means of pneumatic fixture. Suitable for producing sheet size: 165 mm diameter.

For determining the folding endurance of all kinds of paper, paperboard, foil & films with a standard folding speed per minute.

A. Kohler Molin Type with Five Figure counter - Loading clamps of dead weight type, giving standard load of 800 gm, during the test. With Five-Figure impulse Counter having hold and zero setting.

B. Schopper Type with Five Figure impulse Counter - Loading clamps of spring type giving standard load of 1000 gm during the test. With Five-Figure impulse Counter having hold and zero setting.

We offer Fiber Classifier which are Bauer Mc Nett Type for investigating the fiber length distribution in pulp. Each unit provided with an electric motor for driving the rotor and is fully self-contained. All units easily combined in cascade mode. The screen frames are self clamping with spring loading mechanism

We offer smoothness and porosity tester for determining the smoothness and porosity of paper and board. based on rotameter airflow principle. Provided with three imported variable area flow meters (Rotameter) and accessories.

Measuring range

•5-150ml/min.
•50-500ml/min.
•300-3000ml/min.

We offer heavy duty tester to determine the compression strength of corrugated & non-corrugated boxes. The instrument provide the Digital Display of compressive Load for determination of box compression strength. Complete with memory for retaining peak value, automatic or normal zero setting, motorized version with DC drive and DC geared motor provide the variable compressive speed, overload and over travel protection facilities.

We offer precision thickness micrometer for rapid and accurate measurement of thickness of paper, board and plastics.
Motorized, sturdy, easy to use and “push the button” operation. Digital Display, Mitutoyo (Japan) make add-on type optical transducer.

With Resolution 0.01mm.
With Resolution 0.001mm.

We offer tearing resistance testers which are Elmendorf Type , which has the following features :

A. For measuring the resistance against tearing of paper, board, plastic films and other similar materials. An initial cut is made in a set of test piece, which are then torn through a given distance. the work done in the test piece is measured as the loss in potential energy. Of a pendulum which is free to swing on it horizontal axis. A calibrated scale indicates the mean tearing force.

B. Electronic Tearing Resistance Tester – with standard ‘B’ pendulum pneumatic clamping of the test pieces, automatic calculations through Microprocessor and presentation of measured value, all of which ensure accurate and stable test results.

We offer tesnsile strenght testers for determining the tensile strength and stretch at break of the paper, board, metal foil, textile and plastics.
D. Electronic Tensile Tester (Vertical Model, Microprocessor Based) – for providing rapid and efficient determination of tensile strength, stretch and tensile energy absorption of paper and paperboard with in-built printer and imported load cell and imported DC Drive. Complete with memory for retaining peak value of load, automatic zero setting, overload and over travel protection facilities.