|
Products Range 
| View all our products / services as a slide show.
|
|
Testing Equipment
|
We are amongst the leading manufacturers and suppliers of Laboratory Testing Equipment, Scientific Laboratory Equipment, Material Testing Equipment, Technical Education Laboratory Equipment, Soil & Concrete Testing Equipment, Petroleum Testing Equipment, Educational Training Equipment and Laboratory & Metallography Equipment. These are widely used for quality control, product and material development and research in various industries, technical & educational institutions, research institutes and mechanical test laboratories. Provided in customized sizes and specifications, our range includes:
|
| | We are manufacturing Torsion Testing Machines, which are used for conducting torsion and twist on various metal wires, tubes, sheet materials. The torque measurement is done by pendulum dyanometer system and its range can be adjusted by auto torque selector. Moreover, Torque can be applied to specimen by geared motor through gear box. The features and specifications are: - Autographic recorder gives the relation between torque and angle of twist
- The accuracy of torque indication is ±1% of the true torque
Technical Data: | MODELS | UNIT | UTT-6 | UTT-10 | UTT-20 | UTT-50 | UTT-100 | UTT-200 | | Max. torque capacity | Nm | 60 | 100 | 200 | 500 | 1000 | 2000 | | Torque Ranges | Nm | 60, 30 | 100, 50,20 | 200,100, 50 | 500, 250, 100, 50 | 1000,500, 250,100 | 2000,1000, 500, 200 | | No. of Div. on Dial | Nos | 600 | 500 | 500 | 500 | 500 | 500 | | Torsion Speed | RPM | 1.5 | 1.5 | 1.5 | 0.5 | 0.5 | 0.5 | | Clearance between Grips | mm | 0-420 | 0-420 | 0-420 | 0-500 | 0-600 | 0-1000 | | Grips for Round specimens | mm | 4-8 8-12 | 4-8 8-12 | 7-10 10-15,15-20 | 10-17 17-24,24-30 | 10-18 18-26, 26-34 | 20-30, 30-40, 40-50 | | Grips for Flat Specimen & width in mm. | mm | 01/05/25 | 02/08/25 | 03/10/30 | 05/12/40 | 05/15/50 | 10/20/60 | | Motor (400-440 V, 3 Phase & 50 Hz.) | HP | 0.5 | 0.5 | 0.5 | 0.5 | 1 | 1 | |
We are offering Creep Testing Systems in different capacities as per the client’s requirements. The machine helps in finding the behavior of a Specimen under Load/ Stress over a desired period of Time and under Controlled given constant Temperature. Equipped with best technologies to provide our clients with most consistent results, the machine has Split Furnace, which is designed to work continuously for a long period of time ranging from days to year. These machines can work under high temperature over a long period of time. The specifications are: General Specifications
| | Capacity | 100 Kgf, 500Kgf, 1000 Kgf, 2500 Kgf, 3000 Kgf, 5000 Kgf, 10000 Kgf or more | | Type | Floor Standing / Table Top version | | Lever Arm Ratio | 1:5,1:10,1:20,1:30 (as per your test requirements) | | Furnace (Split Type) | Three Zone, (600°C, 1000°C, 1200°C, or as per test requirements) | | Temperature Control | PID Control System. Individual PID for each Zone. (Eurotherm or equivalent make) | | Load Tray Adjustment | Manual / Motorised control | | Creep Extensometer | Inconell material used for high temp, environment with LVDT / Dial Gauge attached. | | Data Logger | Time, Temperature and Displacement Recorded Simultaneously for Multiple Units. | | Software Program | Windows based user friendly Creep Software, FREE up-gradation for life time. | | Lever ARM Center control | Auto control using closed loop through clutch and draw head assembly. | | Power Supply | 220 VAC, Single Phase, 1 kW with Spike Buster for Electronics. | | Optional | Computer, Printer are Optional. Software will work with Computer P-4 or Higher | | Spares | All necessary spares will be given with M/c, for 2 years trouble-free operation | | |
| | | Universal Testing Machine | We are offering universal testing machines, which are used for studying and comparing the results in statistical format. These are perfect for usage where the Batch Reports are studied for the production. The UMI software installed in the machine provides it flexibility and assurance of lifetime quality service. The test data can be analyzed for following graphical interpretations: - Water Fall Diagram
- Mean Deviation
- Frequency Distribution
- Skew Diagram
- Histogram
Some of the features are:
Security Manager: Security manager helps the user to protect and save the test data of all the previous tests with the help of Password Protection feature .
Graph Tracing: The resultant graph can be traced in various resolution of displacement with special zoom mode for time related behavior of the specimen. |
| Servo Driven Universal Testing Machine | We are offering to our clients Servo Driven (A.C/D.C) series Universal Testing Machines, which suit virtually every force testing application to aid in Production Testing, Quality Assurance Testing, Material & Component Evaluation, Design Verification, Vendor Qualification and Product Performance Validation. These machines offer a far better accuracy & resolution advantage over mechanical testers. The features and specifications are: Features: | Load Capacity Range | Wide choice from 100 Kg/1000 Kgf/10/20/30/40Ton models depending on application | | Mechanical Tests Supported | Tensile, Compression, Tear, Sheer, Peel, Puncture, Friction, Flexure, Insertion, Bend, Extraction, Adhesion | | Load Accuracy | 0.2% of full scale | | Loading Frame mount/Floor | Powder Coated elegant & robust with compact footprint with table mount option | | Drive Mechanism | Single/Twin Ball Screw driven by variable speed drive for zero back lash & excellent length accuracy | | Testing Area | Dual Space with interchangeable Load Cells | | Control Mechanism | Microprocessor based controller with 30 KB inbuilt memory | | Safety Features | Emergency Stop Button, Upper & Lower Limit switches with over travel Protection & load cell overload Protection | | Output | RS 232 Serial Port for PC Interface, Parallel Port for Printer Connectivity | | Software | UMI's User friendly Evaluation Software for Data Analysis | | Display | 2 Line x 40 character backlit LCD Display | | Options | Wedge Grips for Tensile Test, Compression Plates, Fixtures for 180°& 90° Peel test & Flexure Tests | | |
| | | Electromechanical Tensile Machine | We are engaged in manufacturing and supplying of Electromechanical Tensile Machine, which has a digital display of load and displacement and belt pulley system for changing speeds. The machine is designed for testing various materials like Cables, Plywood and Metals. The features are: - Tension, compression, bend and flexural tests can be performed on these machines with suitable grips and fixtures which are available in wide range
- The machines are powder coated for elegant look
- The critical components are plated for rust prevention and durability
- Selection of different speeds by belt pulley system
- Facility to mount different load cells
- Facility to mount various grips /fixtures for different tests materials like rubber, plastics, cables, leather, papers, plywood and metals
The Electronic Control Panel of the machine includes: - Front panel
- Membrane type keyboard for test setup
- Seven segment digital display of load and displacement
- Storage of important parameters such as peak load, break load and maximum displacement facility of return of crosshead to home position for next test
|
We are engaged in manufacturing and supplying of Brinell Hardness Testing machines, which are precision engineered as per IS: 2281 -1983, BS: 240 and ASTM: E10. These machines are used for measuring hardness of casting forgings, other metals and alloys of all kinds, hard or soft, whether flat round or irregular in shape. The specifications are: Technical Data: | MODEL | UNIT | UMI-3000 H | | Loads |
| 500 to 3000 in stages of 250 | | Initial Load | kgf | 250 | | Max. test height | mm | 110 | | Depth of Throat | mm | 200 | | Max. depth of elevating screw below base | mm | 180 | | Size of base | mm | 370x670 | | Machine Height | mm | 1127 | | Net Weight (Approx) | Kg | 450 | | Drive Motor | HP | 0.33-415v/p | Standard Accessories: | MODEL UMI-3000 H | | Testing table 200 mm | 1 pc. | | Testing table 70 mm with V groove for round jobs -10 - 80 mm dia | 1 pc. | | Ball holder 5 mm | 1 pc. | | Ball holder 10 mm | 1 pc. | | Test Block HB- 5/750 | 1 pc | | Test Block HB-10/3000 | 1 pc | | Brinell Microscope | 1 pc | | Allen Spanner | 1 pcs. | | Telescopic cover for elevating screw protection | 1 set | | Instruction manual | 1 set |
Technical Data: | MODEL | UNIT | UMI-3000 O | | Loads |
| 500 to 3000 in stages of 250 | | Initial Load | kgf | Nil | | Max. test height | mm | 380 | | Depth of Throat | mm | 200 | | Max. depth of elevating screw below base | mm | 180 | | Size of base | mm | 370x670 | | Machine Height | mm | 1185 | | Net Weight (Approx) | Kg. | 500 | | Drive Motor | HP | 0.33-415v/p | Standard Accessories: | MODEL UMI 3000 O | | Testing table 200mm | 1 pc. | | Testing table 70 mm. 0 with V groove for round jobs -10 - 80 mm dia | 1 pc. | | Ball holder 5 mm. | 1 pc. | | Ball holder 10 mm. | 1 pc. | | Test Block HB-5/750 | 1 pc. | | Test Block HB-10/3000 | 1 pc. | | Brinell Microscope | NIL | | Allen Spanner | 4 pcs. | | Telescopic cover for elevating screw protection | 1 set | | Instruction manual | 1 set | | |
| | We are offering impact testers, which have the impact testing capacity of 300 J and are designed as per the ASTM standards. These are used for conducting Izod, Charpy test, which conform to BS BSEN: 10045-2:1993, BS 131 Part 41972 (Amended 15 Aug 1993). The machine works as follows: - The Pendulum is mounted on antifriction bearings
- It has two starting positions, the upper one for Charpy & the lower one for Izod testing
- On release, the Pendulum swings down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale
- There are two strikers and one combined support available for fitting in to the pendulum and on to the base to the machine for Izod, Charpy test
- Changing from one striker to another is achieved simply by fixing the new striker into it's position
The following tests can be done using this machine:
CHARPY TEST: - The Charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws
- End stopper is provided for quickly and accurately locating the test piece centrally between the supports
IZOD TEST:
- The Izod test piece is clamped vertically in Izod support fitted on the base of the machine
- The support is provided with a machined vertical grove to suit the test piece size The front clamp piece and the Allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied
|
| Dynamic Balancing Machine | We are manufacturing Dynamic Balancing Machines for our esteemed clients. These machines are equipped with Digital Display for RPM Indication for indicating balancing speed on a continuous basis. The features and specifications are: - Digital Balance for Unbalance Indication: Amount (Accuracy ±1 Digit) and Angle of unbalance (Accuracy ±1 Degree) for both planes displayed separately
- Simultaneous Indication: Amount and Angle of Unbalance in both planes displayed simultaneously and remains displayed (Stored) till the next run
- Key-Board: Accuracy of Data Feeding (rotor dimensions and balancing tolerances) accurate upto 1 digit since it is done by keypad input
- Tolerance Indicators: Separate LED's are provided for both the planes which glow when unbalance is reduced within balancing tolerance
- Auto Range: Coarse or Fine Range gets automatically selected till rotor gets balanced within tolerance limits
- Auto Stop: Machine stops automatically after stabilisation of unbalance results
- Data Storage: Data of various rotors can be stored against respective rotor type numbers
- Self Check: Panel is equipped with this mode which checks proper functioning of digital display, LED's in cyclic operation. This assists in immediate fault detection
Technical Specifications: | MODELS | UNIT | HDM-10 | HDM-30 | HDM-50 | HDM-100 | HDM-300 | HDM-650 | | Weight of rotor | kg | 0.5-10 | 01/30/09 | 02/01/50 | 03/01/00 | 10/01/00 | 20-650 | | Max. weight on each pedestal | kg | 7.5 | 22.5 | 30 | 75 | 180 | 480 | | Max. diameter of rotor over bed | kg | 600 | 600 | 600 | 1000 | 1000 | 1200 | | Max. distance measured from coupling end to extreme bearing centre | mm | 480 | 480 | 1100 | 1350 | 1350 | 1650 | | Min. distance between Roller bearing of pedestals | mm | 75 | 75 | 75 | 90 | 110 | 300 | | Rotor Journal dia | mm | 05/01/50 | 05/01/50 | 05/01/50 | 15-80 | 20-120 | 20-120 | | Balancing speed (n) | RPM | 1000 | 700 | 700 | 600 | 500 | 350 | | Power of drive motor | HP | 0.33 | 0.75 | 0.75 | 1.5 | 3 | 5 | | Acceleration Capability (GD2n2) | kgm2n2 | 0.29x106 | 0.37x106 | 0.37x106 | 0.88x106 | 3.9x106 | 8.56x106 | | Minimum unbalance mass measured | 9 | 0.01 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | | Maximum unbalance mass measured | kg | 0.4 | KH | 4 | 4 | 4 | 4 | | Unbalance reduction ratio | % | 95 | 95 | 95 | 95 | 95 | 95 | | Minimum achievable unbalance per Rotor Weight (for max. weight or rotor) | gmm/kg | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | | |
| | We are offering CBR Load Frames (UMI-106), which are used for finding the relative bearing ratio and expansion characteristics of soil used for base, sub-base and sub-grade of roads, pavements and run ways. These can conduct tests on all types of soils including sand, gravel, and crushed stone. Our frames are used for selection of materials and control of sub base. The test is done in following manner: - The testing procedure is very simple
- A 50 mm dia penetration piston is forced in the test soil and load required to penetrate the piston is measured
- Load is measured by mean of compression proving ring and penetration depth by dial gauge
General Apparatus:
- Load Frame - 5000 kg
- CBR Mould with Perforate Base Plate & Collar
- Penetration Piston
- Circular Metal Spacer Disc
- Annular Metal Weight
- Slotted Metal Weight
- Perforated Plate of gun metal
Essential Accessories:
- Proving Ring - 3000 kg: 1 no.
- Dial gauge - 25 mm x 0.1 mm: 2 nos.
- Annular Metal Weight - 5 kg
- Slotted Metal Weight - 5 kg
Motorized CBR Apparatus:
- This is essentially 'A' standard CBR except that the load frame is electrically driven
- Here, load is applied through a motor driven screw jack with gear box to obtain the correct penetration speed of 1.25/7 mm per minute
- The machine can also be operated manually by a hand crank supplied with machine
- Machine can be operated on 2220-240V, 50 Hz, single phase AC supply
|
| Cube Mould, Cylindrical Mould & Beam Mould | We are offering to our clients with various kinds of moulds such as Cube, Cylindrical and Beam. Made of high quality metal, these are used for concrete strength testing, which requires test specimens to be cast in a number of standard sizes for compression and flexible strength determination. The features and specifications are as follows: - These are strong enough to resist distortion or porosity and retain their shape and size under rugged conditions
- These moulds are given internal surface finish of a very high order, to comply with requirements laid down in IS:10086, BS:1881, ASTM C31 and ASTM CI 92
- The design is such that during dismantling and re-assembly, these moulds attain accuracy of alignment.
UMI offers Cube Moulds, Cylindrical Moulds and Beam Moulds of various sizes as listed below: - Moulds available: 150x150mm and 100x100mm
- Cast Iron made: 150x150mm
- Base Plate: M.S 10mm thick
- Weight: From 7.5 kg to 17.5 kg
- Colours: Blue or as per requirement
- Packing: Each mould will be packed in carton box after covering poly bag and 50 boxes will be packed in one wooden case.
- Above moulds are supplied exactly as per BS EN 12390-1:2000, if required.
- Above moulds also available in 14kg & 17 kg weight.
We also have various other low cost Cube Mould, Cylindrical Moulds, Beam Moulds and other concrete testing equipment. UMI regularly exports Soil & Concrete Testing Equipment to Middle East, UK, Italy & African Region. | |
| | We are engaged in manufacturing Vibrating Machine, which has specially been designed to prepare cement mortar for strength determination as specified in 15:4031. These machines are also used for mixing lime with pozzolonic materials for determination of lime reactivity (as per IS:1727) and for uniform mixing of soils with additives such as lime, cement etc. Our machines have stainless steel mixing bowl with a capacity of 4.75 litres. Moreover, the stainless steel paddles can have both planetary and revolving motion for uniform mixing. It can be electrically driven at two speeds. The specifications are:
| | Revolution of paddle (rpm) | Planetary Movement of paddle (rpm) | | Low speed | 140 ±5 | 62 ±5 | | High speed | 280 ±10 | 125 ± 10 | Designed as per IS:4031 and 1S:10080 standards, these are used for vibrating the mix in moulds according to strictly controlled programme at a frequency of 12,000 ± 400 cycles per minute. The features are: - The Vibrator is mounted over coiled springs and the vibrations are developed by means of a revolving eccentric shaft
- The centre of gravity of the vibrator, including the cube and mould, is either at the centre of the eccentric shaft or within 25 mm below it
- The simple design of the machine facilitates easy assembly and dismantling of the cube moulds
- Each machine is certified for its frequency by the National Council of Cement and Building Materials (NCCBM)
- The machine is suitable for operation on 220 V, 50 Hz, single phase, AC supply. Each machine is supplied with one cube mould (steel) with ISI Certification Mark
The following spares can be ordered as optional extra: - Mould, Steel for 70.6 mm Cube with ISI Certification Mark as per IS:10080
- Spares
- Side Spring
- Supporting Springs (Set of four) Springs, for Fitting Mould (Set of two) Endless Belt Belt Guard
- Cement, Lime, Plaster & Mortar
Specifications: | Centerhole Jack | | Hydraulic Pump | | | Range | 30T/50T | Operation | Manual, by lever | | Hole diameter | 38/54 mm | Pressure Capacity | 700 bar | | Approximate Lift | 75/150 mm | Load Indication | Pressure Dial Gauge | | Movement | 25x0.01 mm | Hose Pipe | 3 meter Flexible | |
| Technical Education Laboratory Equipment | We are engaged in offering to our clients Technical Education Lab. Equipment which are educational equipment. These are manufactured with precision and are provided to our clients in customized sizes and specifications. For more details kindly download the attached PDF. | |
|
© Universal Motion, Inc.. All Rights Reserved (Terms of Use)