Universal Spares India Private Limited

EVEREST 3 CORE FLAT CABLES are manufacture for critical space requirement, protection against indefinite immersion in water under specified conditions, protection against rain water and ingress of small, solid foreign bodies.

These cables are manufactured from best quality electrolytic grade copper that is drawn, annealed online and bunched on automatic machines to ensure flexibility and uniform resistance. The conductore are insulated with a special grade of PVC on sophisticated co-extrusion lines. Outer sheath consists of highly abrasion resistance PVC compound impervious to grease, oil and water, ets.


Double Sheathed 3 Core & 4 Core Round Submersible Cables
EVEREST Double Sheathed Round 3 Core and 4 core Cables are better suited for heavy duty applications like Sewage, Slurry and dewatering pumps. The operating conditions require the Sheathing to be able to withstand abrasion, prevent ingress of water and be resistant to acidic fluids and chemicals.


RANGE:
(A). PVC Insulated and PVC sheathed 3 Core Flat Submersible Cable Stranded copper conductors Flat Submersible Cable : 1.0 Sq. mm to 50 Sq. mm

(B). PCV Insulated and PVC Sheathed 3 Core Flexible Copper Conductor Flat Submersiblr Cable Conforming to IS :694/1990. (0.50 sq.mm to 4.0 sq.mm )

Fire
alarm cables are fixed transmission cables and they are installed on
or beneath plaster surfaces in dry and damp premises as well as in
the open air. As the cable is supplied with the message " fire
warning cable" it
is especially suited for installation in modern fire alarm systems.

DESCRIPTION:
EVEREST
solid/stranded annealed plain electrolytic grade copper conductor as
per IS:8130. core insulated with extruded PVC conforming to IS:5831.
Two such cores twisted together to from a pair and wrapped with
aluminium backed Mylar tape with drain wire of ATC copper and finally
sheathed with special PVC compound.


TECHNICAL
DATA

• For
  Copper Cable : Type -YY/YWY/YFY


• Conductor
  : Solid/Stranded


• Bending
  radius : 10* cable Diametr


• Colour
  Code : As per ISI


• Working
  Voltage : 350/500 volts


• Test
  voltage : 2000 volts


• Insulation
  Resistance : 20m ohm/km (at 20. C)

Fire
Alarm cables

S. No.	Pairs Nos. & Diameter(mm)	Outer Diameter (mm)
1	1X2X0.8	5.7
2	2X2X0.8	6.1
3	4X2X0.8	6.5
4	6X2X0.8	7.8
5	10X2X0.8	8.4
6	20 X 2 X 0.8	9.1
7	1X2X0.8	5.0
8	2X2X0.8	5.5
9	4X2X0.8	6.8
10	6X2X0.8	7.5
11	10X2X0.8	9.0
12	11X2X0.8	11.0

Everest House Wiring Cable is a trusted name for reliable electrical wiring in homes, offices, multistoried buildings, hospitals, hotels and industries etc. enjoying an enviable reputation for its super quality and reliability. These cables are manufactured using best quality bright annealed electrolytic grade copper having conductivity of more than 102% for smooth flow of electricity thus saving energy consumption. PVC used as an insulant is manufactured in- house and has good dielectric and physical properties with high insulation resistance value that protects against any electrical fault.


RANGE:
Fire Retardant (FR):Our normal wire are fire retardant with a high oxygen and temperature index that helps in restricting the spread of fire even at high temperatures.

FIRE Retardant Low Smoke (FRLS):Apart from a high oxygen and temperature index our FRLS house wiring cables also have low smoke and toxic gases generation properties that helps in easy evacuation and rescue operation in case of fire. These FRLS cable are ideal for use in places of high human density.

Heat Resistant (105°C): Beside being fire retardant our heat resistant (105°C) cables can withstand excess heat generated within the cable due to low voltage. These heat resistant wiring cables can handle conductor temperatures up to 105°C-and are suited for areas with wide voltage fluctuations.

Zero halogen Flame Retardant ('O' HFR): Besides other fire retarding properties our 'O' HFR wires emit smoke fire, non- toxic, non-corrosive gases in case of fire. They are ideal for use in public places where risk of human lives and property are of prime concern.

WHY EVEREST HOUSE WIRING CABLES ARE BETTER:
Purity: Our copper has more than 102% conductivity which means reduction in electricity bills.

UNIFORMITY : We have the most advanced in-house wire drawing, stranding and bunching facilities to give a uniform lay and smooth finish of the conductor. Better Flexibility: Uniform annealing of copper provides better and more flexibility.

DOUBLE INSULATED: A thin coloured layer is only on the surface for colour identification. The thick layer of natural virgin PVC underneath provides improved insulated resistance value.

CENTRE PERFECT: Automatic self- centering head coupled with on -line diameter controller maintains the conductor perfectly in the center of PVC insulation to prevent short circuit occurances due to uneven thickness and eccentricity of insulation.

CONSISTENCY : All wires pass through the spark tester to withstand high voltage stresses of 6-25 KV for consistent quality, free of foreign particles through out.

CURRENT CARRYING CAPACITY:Hieher current carrying capacity owing to for conductor resistance.

FLEXIBLE CABLES
EVEREST Flexible cable are also renowned for its quality, durability reliability as best raw material inputs are processed on sophisticated extrusion line and strictly tested at every stage.

The growing sophistication of the electronic industry continue to create need for specially designed cables for use with computer- controlled electrical and electronic equipments. To satisfy requirements for impedance matching, lower bit error rates, lower cross talk, longer transmission distances and high signal purity, we care manufacturing an expanding spectrum of instrumentation data and control cables in full range of sizes, insulations of different types,shields types for special installations. We can also amour these cable for mechanical protection.


Description:
Conductor: Solid/Stranded, tinned /bare /silver plated and made -up of annealed high conductivity electrolytic grade copper as per IS: 8130 with conductor sizes ranging from 0.50 sq. mm. 10 sq.mm.

INSULATION: PE / Foam PE/ PP / PVC / Special Thermoplastic materials

CONSTRUCTION: Paired/Triads or Quads construction with individual/ collective shields.

COLOUR SCHEME: As per IEC//ITD/MIL Standards/ As per customer specification.

SHIELD: Aluminium Foil with ATC Drain Wire /Copper Braid Shielding.

SHEATH:  FRLS PVC/HR PVC/NORMAL PVC/PU or any other Thermoplastic Materials.

EVEREST LAN CABLE - UTP CAT.5
A growing network system deserves a cable that you can count on for optimum performance now, and into the future.

EVEREST* LAN cables - UTP CAT.5 meet the performance requirements of EIA/TIA 568A/B and are most suitable for voice, data, video, low voltage control and all LAN topologies including horizontal and vertical distribution plenum and riser.

Salient Features
1. Low attenuation and crosstalk .
2. Lowstructural return loss.

The conductor is made up of high conductivity electrolytic grade plain annealed solid copper of size 0.5 mm, High quality polyethylene insulated with suitable colour coding, twisted pair, unshielded, light gray/off-white jacketed with improved fire characteristic meeting requirement of IEC -332 - High oxygen and temperature index.

Construction
1. PVC jacket
2. Rip cord
3. PP insulation
4. Bare copper conductor



EVEREST LAN CABLE - UTP CAT.6
A growing network system deserves a cable that you can count on for optimum performance now, and into the future.

EVEREST XLPE cables are manufactured on state -of- the-art machines using best quality raw materials. XLPE means crosslinked polyethylene or vulcanized polyethylene. The basic material is low density polyethylene. Polyethylene is a thermo-plastic material consisting of long chain hydrocarbon molecules. At elevated temperatures these molecules tend to move relative to one another so that the material becomes increasingly deformable and will eventually melt at a temperature around 110°C.


By means of process similar to the vulcanization of rubber the PE molecules can be cross linked. The process of cross-linking or vulcanization consists of producing chemical bonds at intervals between the long moleculer chain to give a "LADDER" effect, which prevents slippage between molecules. As a result of cross-linking the material becomes heat resistant and does not soften at higher temperatures. Further, it has better resistant to stress cracking and good resistance to ageing in hot air. With the change of structure there is no adverse effect on electrical properties. EVEREST XLPE cables are excellent in Electrical, Thernal, Mechanical & Chemical properties. The various advantages of using our XLPE cable are given below:

1. Dielectric losses are very small.
2. Higher current carrying capacity
3. Higher short circuit rating as XLPE can withstand shot circuit temperature upto 250°C where PVC and Paper insulated cables can withstand upto 160°C only
4. XPLE cables are not prone to fatigue damage due to vibrations or overloading cycles.
5. XLPE cables retain their flexibility down upto -40°C.
6. XLPE cable are light in weight. This makes easy handling during manufacturing & installation
7. Jointing & Termination are very easy. Smaller bending radius is sufficient
8. XLPE cables can be installed along cable routes without elevation limitation
9. XLPE cables has a better resistance to most chemicals such as ordinary acids, bases & oils.
10.In case of XLPE cable, both the ageing properties and the resistance to deformation under mechanical loading at higher temperature enable the material to withstand emergency overload temperature of 130°C.
11 .PVC Cables as well as impregnated paper cables have distinct
disadvantages regarding environmental protection, if they burn, PVC gives off corrosive gases and leaking oil filled cables can cause severe damage to water supplies. It is true that XLPE also burns but the combustion products, carbon-dioxide and water do not cause a damage. Further more, it does not melt like polyethylene.
12.Finally XLPE insulated cables do not require any maintenance. This makes them especially suitable for use in industrial networks and those isolated parts of general transmission network where maintains would be difficult to arrange.
Thus XPLE cables are excellent in performance.


RANGE:
(1) 1.1 KV Grade XLPE Insulated & PVC overall sheathed Armoured / Unarmoured Aluminum/Copper Cable.
Standard :IS : 7098 (Part-1)1988
Single core up to 1000 Sq.mm. AndMulti core up to 630 Sq.mm.
Including HR PVC & FRLS Cables
(2). 1.1 KV Grade XLPE Insulated & PVC overall Armoured /Unarmoured copper cable Standard: IS: 7098 (Part-1) 1988
Single core up to 61 cores. Insulated HR PVC & FRLS Cable.

EVEREST LT PVC Power & Control Cable are of excellent quality as these are manufacture on sophisticated extrusion line using best quality raw materials and thoroughly tested at every stage of process till finished product as per IS : 1554 (Part -1 )/19S8. These cables are also easy to handle. Simplified terminators and jointing techniques woke these cable eminently suitable, among other applications, for industrial and mining installation.

The main advantages of our cables are:
1. Insulation resistance and breakdown strength are practically unaffected by moisture. These cables are thus suitable for laying even underwater.
2. Can be laid vertically and on steep slopes as there is no impregnating compound involved.
3. Flame retardant since PVC ignites with great difficulty and is self-extinguishing.
4. Immune to chemical normally encountered in practice.
5. Can be overloaded for short periods without any appreciable effect on cable life.
6. Due to their light weight, PVC cables are easy to install and handle. Small bending radii permits the termination of this cables in limited space.
7. Low tension PVC cables do not normally require sealing ends, when terminated indoor. The termination can therefore be effected quickly and economically.
8. PVC cables have tough but smooth outer covering and are thus abrasion proof.
9. PVC cables are not affected by vibrations.
10. PVC cables have high short circuit capacity since they can withstand a high transient temperature without any deformation of insulation or displacement of conductor.
11. PCV cables have a long service life.


RANGE:
1. LT PVC Power Cable 1.1 KV as per IS :1554 (Part-1) 1988
Single core PVC Insulated Sheathed, Armoured\Unarmoured upto 1000 Sq.mm . Multicore cable upto 630 Sq. mm Insulated HR PVC & FRLS Cables

2. LT PVC Control Cable 1.1KV
Up to 61 cores Armoured \Unarmoured (Including HR PV & FRLS cables)

EVEREST Radio Frequency Coaxial Cables are available in one the most comprehensive range. Signal transmission in electronic applications and data communication cables now have to accommodate faster signal speeds over longer distance with less signal loss. Additionally new shelding requirement to meet FCC RFI/EMI emission controls, tougher fire /temperature requirements requiring special materials in critical installations and demands for high density wiring are factors which have been considered in many of our coaxial and data cable prod ucts.

EVEREST R.F. Coaxial Cables are designed to meet these needs for safe and reliable transmission of voice, video and data.
Characteristic Impedance : 50-55 ohms
Characteristic Impedance : 70-75 ohms
Characteristic Impedance : 90-125 ohms


EVEREST Comprehensive line of RF coaxial cable includes:

• Standard RG / URM / JSS / JIS Type coax for commercial and defence use.
• Triaxial cables- balanced lines for reduced cross-talk
• MATV and CATV Cables.
• Networking load for LAN, WAN, ETHERNET, ARCNET, NOVEL, LAN, Delink and other complex applications.
• Dual Coax- workstation Coax for large word processing system.

Communication is the most vital line in today's fast moving world which is dependent on the use of best quality cables delivering right signals with high accuracy.

EVEREST Telephone and Switch Board cables are made of high conductivity electrolytic grade annealed timed copper conductor hard grade PVC insulated and properly colour codes. The insulated cores are twisted with a suitable lay to form a pair. The pairs are bunched together in a manner to minimize cross talk. These bunched pairs are then wrapped with polyester tape and then jacketted with grey colour fire retardant PVC along with rip cord, manufactured as per ITD/TEC /BT/BS Standards.

RANGE:

• Up to 200 pairs in 0.4, 0.5, 0.6, 0.7 unarmoured /armoured
• Application: Indoor Telephone Wiring, Switch Board Wiring, Private Telephone
• Exchanges, Intercoms, Telecommunication Equipments, Etc.

Salient Features:

• Excellent Quality
• Low Cross- talk
• Fire Retardant
• High speed Transmiccion.

The electronics and automation sectors demand reliable transmission signals without any disruption. The increasing 'electromagnetic pollution of the environment' caused by an Increased use of electronics has made it essential to achieve efficient transmission of important signals. Pair stranding is an effective way to oppose cross talk effects.

 

EVEREST* cables provide a high level of protection and ensure data transmission without the disruptive effects of high frequency interference with close ATC braidingas screening, Forfurther clarification on any variations from the standard product range, for instance, core, outer sheath and expanded temperature range, etc., please do contact us.

 

Description

Fine wire strands of annealed, plain, high conductivity, electrolytic grade copper conductor. Individual core insulated with extruded PVC compound. Two cores twisted together to form a pair wrapped with Mylar tape, then inner sheath, screened with ATC braiding and finally jacketed with a special PVC compound.

 

TECHNICAL DATA

For Copper Cable Type: :YY / YWY / YFY

Conductor stranding : Stranded extra fine wire

Bending Radius (Min.) : 20 x Cable Diameter

Inductance : 0.67 mH / km (approx.)

Impedance : 80 ohm (approx.)

Mutual Capacitance : Core - Core 100 nf / km and Core - Screen 140 nf / km

Colour Code : As per ISI

Working Voltage : 350/500 volts

Test Voltage : 2000 volts

Insulation Resistance : 2000 volts 20 M ohm/km (At 20⁰C)

Everest UL approved wires and cables are trusted name for reliable electronic and electrical wiring either indoor use or outdoor use, enjoying an enviable reputation for its super Quality and reliability. These cables are manufactured using best Quality bright, or tinned annealed electrolytic grade copper conductor confirming to ASTM B-268, having Conductivity more than 102% for smooth flow of electricity. PVC compound used as an insulation or sheath is manufactured in house and has physical properties meeting the requirement as UL standard UL:758 AWM and UL:62 for flexible service cord for indoor use or outdoor use with better fire performances as requirement by UL/CSA

Range:
(A) Appliance Wiring Material (AWM UL:758): Complete range of more than 100 styles like 1015, 1569, 1007 etc. in veries types of insulation materials like PVC, LDPE, PP & XLPE etc in single core and mulicore, shielded and unshielded, un jacketed/Jacketed cables in different voltage and temperature rating.

(B) Flexible service cord confirming to (UL: 62): " SJT & SVT power cords/ Approval for complete range of flexible service cord like SJTO, SJTOO, SJTW, SJTOW, SJTOOW, STO, STOO, SVTO, , SVTOO, SVTOW, SVTOOW, SPT-1, SPT-2, SPT-3, NISPT-1, NISPT-2 etc is under process and will get very soon.

We are also one of the leading manufacturer of wire harness assemblies/cable assemblies/main power cords , etc. Our works is fully equipped with the state-of-the-art machines viz.,automatic moulding machines, pneumatically operated discrete wire crimping stations, automatic cut/strip machines, etc along with a complete tool room -all facilities under a single roof.


We manufacturer and offer our products for varied industrial sectors viz., telecommunication, automotive, power systems, Tv systems, air conditioning systems, etc. The quality of our products have been widely acclaimed by both indigenous and global OEMs.