We are trusted name in manufacturing magnetic ''V'' Block which are extensively used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs. These blocks have accuracy for Flatness, Squareness and Parallelism within 0.005mm upto 6”L & 0.010mm for 8” L of "V"block. Its bigger V angle & bottom holding surface are equipped with hardened strips for wear resistance. It provides uniform and strong magnetic pull to all three magnetic surfaces Top, Bottom & V face. Not only this, its hardness of V face is 60±2 Rc. Further, it has the following features:

• Powder Coated
• Easy ON- OFF facility
• 120^o " V " angle also available

Our magnetic ''V'' Block are available from 2” to 10” size. The newly developed Magnetic “V” Block’s are having all sides Harden & Ground. For the purpose of EDM Machine Leak poorf Magnetic “V” Block’s are also available in various sizes.

We are a prominent name in manufacturing permanent Magnetic Chuck’s which are available in different Pole Pitch, that is 30mm, 35mm & 1.5mm Pitch. Our product is provided in Rectangular as well as Round Chuck’s. It is a kind of holding device for machines like surface grinding machine, tool & culler gnnder and spark erosion machines. Further it has the following features:

• Accuracy as per IS 4B16- 19B7 Assembled with powerful Magnets
• Poles individually magnetized for full loading power
• Magnetic pull is 40-70% more than fS spec ill cation.
• Bottom pJate has suitable extension to damp on table.
• Easily operated ON-OFF lever.

Electroperm magnetic chuck is a work holding device for milling, grinding machine. These are available in various sizes, types of Poles. The pole’s is used in Tool Room Industries by 70 x 70 quard pole OR 47 x 47 Quard Pole for the milling machine. The pole which is used for Grinding Machine are 40mm Pole Pitch OR 4 1mm Pole Pitch. For the purpose of milling or grinding machine, the power supply unit remains same.

This machine is actually a work holding device used for surface grinding machines. Each of its pole is having separate coil, so very strong & even magnetic flux is generated. Its accuracy is as per IS : 8710 - 1978. Further, its magnetic pull is 30-50% more then IS specification. Followinga re the other features that our product comprises:

• Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely , using a microprocessor based control Circuitry.
• Variable supply to vary power which helps tn alignment & removing of warpages of thin jobs.
• Chuck is tested for Slippering force, Waterproof test, temperature rise test, Electrical & Demagnetizing tests
• It is also available in Longitudinal Poles.
• We also manufacture Special chucks to suit individual requirements
• Premium quality & standard electrical accessories
• Rectangular Chuck’s also available in various Pole Pitch like 14mm, 4 1mm & 1.5mm Pole Pitch
• Rectangular Chuck’s are available in various sizes
• We also manufacture Electromagnetic Round Chucks are as per customer''s requirement for Rotary Surface Grinding and Lathe Machine.
• For above chuck special control unit is available which is having a facility of Magnetizing & Demagnetizing with variable control knob.
• We are also providing the control unit with Battery Back-up.

We are ardently manufacturing universal clamping magnetic base with fine adjustment feature. It can be locked in any position in 360º angle by centre lock. It has Base "V" which can be clamped to shaft of 0 20 to 0 120 as it has fine adjustment for accurate settings. Further, it powerful magnetic base holds firmly to ferrous surfaces vertically,horizontally and upside – down. As a part of its advantages, it has an ON - OFF facility and can be used as holding device for dial indicator.

We are leading manufacturer of magnetic sweepers which are used for collecting of ferrous particles scrap from floor space. These have good quality & for it are strong magnets are used. Our newly developed Permanent Magnetic Sweeper is useful for the shop floor and scrap yard. Further, our permanent Magnetic Sweeper are having many sizes and are further designed as per customer requirement.

Our Permanent Magnetic Lifter’s are offered in various lifting capacity, from 00 Kg. to 2000 Kg. Because of the continues R & D sizes of the lifter, it is very compact & light weight. These are used for lifting & handling of steel plates, heavy blocks & castings as well as heavy round or cylindrical parts. Its 1: 3 safely factor of the suggested load to the lest load ensures use at optimal working conditions even with substantial air gaps & surface conditions. Further, it comprises the folowing features:

• Compact design
• Strong magnetic pull
• Total work safety
• Easy operated lever for ON-OFF.
• Spring loaded block at side for safety feature
• Perfectly suitable for Flat S Round jobs.
• No damage on job during operation

Our H & G “V” Block’s are manufactured in so many sizes, ranging from 2” to 12”. Further, it is also to manufacture them in two degree’s, that is Total angle 120º OR Total Angle 90º . These can be used grinding, light milling, drilling & inspection of round & square jobs. All its sides are hardened & ground and has accuracy for flatness, squareness & parallelism within 0.005mm upto 150L & 0.010mm for 200L. It has a hardness above 60 Re and is supplied in matched pair. These blocks have uniform and strong magnetic pull to all three magnetic surfaces, Top, Bottom & V Faces. Further, they have easy ON - OFF facility and also along with this, 120° "V" angle also available.

We are manufacturing H & G Precision Grinding Vice & Screw Type Grinding Vice in different different openings and different size’s. It is also available in Stainless Steel having Hardness of 55 2RC. Our product is extensively used for holding the jobs, spark erosion operation, right angle grinding & Light machining. They are made from high quality alloy steel. Further, they have features as:

• Accuracy for Squareness
• Flatness & Parallelism within ± 0.005m
• Jaw pressure on work piece is forward & downward for repeatable positioning & maximum holding power.
• All sides can be used as reference.
• Hardness 60 ± 2 Re & Tempered.
• "V" on moveable jaw for better gripping of round jobs.
• Size (mm): 150L x 48W x 60H 180 L x 63 W x 70 H 200 L x 73 W x 80 H
• Jaw Opening (mm): 0 - 75 0 - 90 0 ¦ 100

Our Sine Table’s are available in two forms that is magnetic & Non-Magnetic. These tables are classified in simple & compound angle. Along with this, we also manufacture Simple Angle Sine Vice’s. These are used for Precision measurement, setting of angles, utilizing slip gauge & Light machining. Following are the other features that oir product comprises:

• Accuracy for squareness.
• Parpllsiism £ tidiness \%
• 0 005mm upto 200L& 0.010mm uplo 450L.
• Angle can be sal wilhin t5 seconds.
• Centre Distance between rollers is within D.005mm.
• Made from high quality alloy steel
• Hardness 60 i 2 Re £ Tempered.
• Firm lunged clamp \o reduce possibility of distortion.

These angle plates are invaluable for accurate work in 
Tool room, right angle machining & grinding. 
Made from single piece high quality alloy steel. 
Accuracy for Square ness, Flatness & Parallelism 
Within 0.005 mm. 
Hardness - 60 ± 2 Rc. 
Unique design to hold small cylindrical parts also. 
M6 & M8 tapped holes for clamping. 
Three clamps provided for different clamping.
sizes:-100*100*115
or custom made

We manufacture H & G Try-Square & Straight Edge which are used for checking Squareness & straightness. It is made from single piece high quality tool steel. All its accuracies are as per IS : 2103 -1980 and has a hardness 60 ± 2 Re. It has a groove on the inner corner of the stock, aids in the
clearance of burr or dirt. H & G Straight Edge are extensively used for checking flatness & straightness of surface as it comes in various sizes. Further, we get it packed in individual wooden box. Following are the categories in which the H & G Try-Square and straight edge are available:

• Try-Square with Flat Edge without Stock
• Try-Square with Bevelled Edge without Stock
• Try-Square with Stock
• Try-Square with Flanged Beam.