Cut to Length Lines can do uncoiling, straightening, gauging, cross-cutting to length and stacking work. It mainly includes uncoiler, straightener, gauge, shearer, conveyor, stacker, hydraulic system, pneumatic system and electrical system, etc., the line can make sure of accurate feeding and shearing. It can be widely used in cold or hot rolling carbon steel, tinplate, stainless steel and all the other kinds of metal materials with surface coating. Cut to length line is controlled by CNC system. it has PLC controlled the length measurement.

The information of length, shearing numbers and speed can be input to the PLC systems.When the need shearing number is reached the line can stop automatically.The line speed can be adjusted, It has a gauge with high precision, and whole line can work automatically and operate easily, smooth sheet can be made.Line Capacity The line should operate within the thickness MAX 25mm. The maximum line speed & cutting rate per minute should be designed by the supplier, Hence the production capacity of this line depends on plate thickness, width and length.

LINE SPECIFICATIONS

INPUT:

MATERIAL: Hot roll steel, Carbon steel
COIL OD: 2200 MM (Max.)
COIL ID: 550-780 MM (Min.)
STRIP WIDTH : 1500-2500 MM (Max.)
THICKNESS: 8 MM -25 MM (Max.)
COIL WEIGHT:30Tons (Max.)


OUTPUT:

SHEET LENGTH : max 12000 MM.
LINE DATA:
LINE SPEED : 20M/MIN (MAX.)
PRODUCTION: Cutting quantity(pcs):2 pcs/min, 6000mm/pcs)
MAX. LENGTH TO CUT : 12000 MM.
ACCURACY ( MEASURING LENGTH) : +/- 1MM/M
ACCURACY (DIAGONAL) : +/- 1.5MM
ACCURACY (LEVELLING): +/- 2MM/M2

We offer Pickling Line. A layer of brittle and hard ferric oxide will form on the surface of the steel strip during the hot rolling, and the ferric oxide layer will affect the surface quality of the strip during cold rolling. Pickling process is applied for removing the ferric oxide. We are professional in this technology, and we can provide the following kinds of pickling lines, push-pull pickling line (semi-continuous pickling line), continuous pickling Line. Push-pull Pickling Line is a semi-continuous production. It is characterized with lower consumption, easier operation and fewer accidents, moreover it can pickle many kinds of incoming material. The pickling line can produce 100000~600000 tons strip annually.

 Line specification
 

• Material - Hot Rolled Strips
• Thickness - 1.2 - 4 MM
• Strip Width – 600-1250 MM
• Processed Speed - 40 - 90 MPM

 
Line Features

• Push Feeding of The Strip with Square Cut Lead Ends
• "V" Shape Granite Bed For The Pickling Tank
• Solid Granite Side Walls for The Pickling Tank
• Rinse Tank with Granite Blocks
• Low Maintenance
• High Efficiency
• No Welding
• Ease of Line Shut Down

We offer a wide range of Galvanizing Line, along with following specification:

Hot-dip Galvanizing Line

We can provide hot-dip galvanizing line, hot-dip plating aluminium-zinc line. The plated strip produced can be applied for construction, household electric appliance, vehicle, and chemical industry etc.

Hot-dip Continuous Galvanizing Line (CGL)

We provide hot-dip continuous galvanizing line with American-Steel-Union process, which can produce galvanized sheet with normal spangles, small spangles or without spangles. The sheet is used widely for manufacture of automobile, household electric appliance, and building construction.

Slitting Line can do uncoiling, slitting and recoiling works, make coil steel to any needed width coil steel.It mainly includes coil car, uncoiler, correct device, slitting machine, scrap recoiler, tension unit, press unit, recoiler and coil car, hydraulic system, etc. These slitting line are mainly used in coil or hot rolling carbon steel, silicon steel and all the other kinds of metal materials with surface spreading. This line can be adjusted to do recoiling or dividing work to meet customer's demand. PLC system is used to select the information from every part of the line, centrally controlled. There also has  speed self adjusted and keep memory after lost power supplement. So these slitting line has efficient performance.

we are one of the manufacturers of tension leveller which is useful for  Cold rolled coils. Our company is engaged in manufacturing component tension levellers which are made from quality raw materials. Manufactured as per the defined standards, we make sure that all the demands are met with.

Name of item :- Roller Guide Shear
Strip width :- 600- 2000 mm
Strip thickness :- 0.2 mm to 6mm

URECO roller guide shear machine with quick gap setting arrangement have been designed and developed through structural analysis technique for continuous production accuracy and repeatability.

1 . FRAME :- Rigid steel frame of URECO Shear are optimally designed to avoid weak section at load support and is interlocked designed. Table of frame is welded together with support of plates. Table top surface will fitted with Rollers .Rollers will rotate on anti friction bearings. At exit side provision for stopper will be provided .

2 . Roller guide :- The upper beam is guided by four point rollers guide . A replaceable hardened liner is provided for minimum wear. It eliminates lubrication of guide .

3 . Hydraulic power pack :- Hydraulic power pack is mounted at top of machine Hydraulic components are of internationally reputed make like VICKERS , DOWTY , REXROTH YUKEN etc. Valves are mounted on a compact manifold minimizing piping and chance of leakage

4 . Hydraulic Cylinders :- Cylinders are precisely honed and are fitted with hard chromed piston rod with best quality imported sealing elements, Cylinder are connected with upper ( Cutting beam ) beam with spherical bearings for higher capacity .

5 . Hydraulic hold down :- Hydraulic hold down pads hold the sheet securely to avoid slipping and bowing resulting in clean square cut .hold down units are provided for better clamping while cutting narrow strips

6 .Blade clearance :- Blade gap can be adjusted manually by lever on each side of machine with calibration of clearance suitable for thickness .

7 . Blades :- URECO Shears provided with high quality, single segment HCHCr blades for longer tool life, easy in assembly of blades reduce down time. The Blades are four edged.

Our Double cut shear is extensively used for punching and cutting sheet metal in the precision form. These double cut shear machines are precision engineered to ensure fast and clean cut with great accuracy. Our double cut shear provides excellent performance without bending or war page of the material being cut.

The Hydraulic Shearing Machine manufactured by our company consists of electro hydraulic overload protection and allied safety features in order to ascertain reliable and prolonged functionality. These hydraulic shearing machine is capable of shearing thick and thin sheets without any distortion and is provided with a replaceable hardened liner to ensure minimum wear.

we are manufacturing Customized Shear as per customer specification.We offer to our clients, precisely accurate pipe customized shear machines with excellent performance and durable features. Customized as per client’s specifications, these customized shearing machine find varied application in cutting of copper pipes in desired dimensions.

We offer a wide range of C-Hook, along with following specifications:

10-35 TON CAPACITY

Sr No.	Description	H.R. COIL	C.R. COIL
1	Coil ID	510/850	508
2	Coil OD	2200	2000
3	Coil Wt.	35 mt.	35 mt.
4	Coil Width	2000	2000

DESCRIPTION-

• Fabricated with SAILMA-350 plate .
  
• Coil resting face will be fitted for mark free handling , camber will be provided for safe handling
  
• C-Hook will be counter balanced.
  
• C-Hook will fabricated with self stand

We manufacture Coil Tongs for any application in the steel industry. Our coil tongs are designed precisely and are also durable and energy efficient. These coil tongs are excellently fabricated as per clients needs.

We offers a wide range of Coil Tilters, along with following specifications:

CAPACITY

• Coil outer diameter 2000 mm
• Coil inner diameter 508 mm
• Coil width 600 mm-2000mm
• Coil weight 35 TON each

Description

Coil tilters will be provided upender to downender or vice verse .Two nos tilting frame will be mount on single base frame. Hydraulic power pack control panel will be provided. Coil tilter will consist following main parts.

Base frame Fabricated with IS 2062 Plate and structural steel
Both tilting frame and hydraulic cylinder will mount on same base frame

Tilting platform Fabricated with IS 2062 plate stress relieved welded with 7018 welding rod of reputed make .Shaft of En 8 welded with tilting platform. One side of coil saddle will V shape and one side will be flat.
Coil resting face will fitted with Aluminum plate.

Hydraulic cylinder heavy duty reputed make i.e. I P H Bombay Trident Faridabad or as per your instruction .

Hydraulic power pack Suitable hydraulic power pack will be provided tilting time will 45 Second .Pump and valve of REXROTH /Yuken Make motor will be CROMPTON /Kirlosker Make. Other items also of repute make.