Uttaranchal Metals Private Limited

A copper & zinc alloy in the ratio of 70/30 having 1-1.5% of tin for corrosion resistance and some % of arsenic, is used to manufacture superior Admiralty Brass Tubes. This amalgamation is done to help against dezincification. Our admiralty brass tube is used for various industries such as oil refinery, ship building and ship repair, power plant, condensers, ferrules, distillers etc. The company is known as one of the commendable Admiralty Brass Alloy Tubes Suppliers from India.

Specifications

Manufacturing range	Outer diameter - 6mm to 65 mm and Wall thickness - up to any subject to OD.
Specification	BS 2871 Part 2 CZ110
Material	Admiralty Brass
Nominal Composition (%)	CU-70.0 to 73.0
-	As - 0.02 to 0.06
-	Sn - 1.0 to 1.5
-	Zn- Remainder

70/30 Arsenical Brass Tubes

Our Arsenical Brass Tubes are made from a copper & zinc alloy in the ratio of 70/30 containing small amount of arsenic to help against dezincification. The alloy is good combination for strength and ductility of arsenical brass tube. It is commonly selected whenever excellent cold working properties and relatively low cost are desirable. These tubes are used for sugar industries, hand pumps, musical instrument, spray equipment, radiator tanks, lamp fixtures, etc. We are famed amongst rank industrial arsenical brass tubes suppliers based in India.

Specification

Manufacturing range	Outer diameter - 6mm to 65 mm and Wall thickness - 0.5 mm to 15mm.
Specification	BS 2871 PART 2 CZ 126.
Material	70/30 Arsenical Brass
Nominal Composition (%)	Cu.-69.0 to 71.0
-	As - 0.02 to 0.06
-	Zn- Remainder

We are premium are counted in the league of remarkable Brass Tubes Manufacturers and suppliers based in India. Our brass tubes have a wide range of applications. The Brass Alloy Tubes from our company are utilized in radiator tanks and cores, flashlight shells, lamp fixtures, fasteners locks, hinges, pins, rivets, buttons, plumbing accessories etc.

Specification

Manufacturing range	Outer diameter - 6mm to 65 mm and Wall thickness - 0.5 mm to 15mm.
Specification	BS 2871 PART 2 CZ 108
Material	Common Brass (63/37)
Nominal Composition (%)	Cu - 62.0 to 65.0
-	Arsenical - 0.06 Max.

We develop Copper Profiles and sections as per customer requirement besides our existing wide range of copper profiles.

Applications of copper profile

Automobiles and railways

Wide range of uses in electrical industry, e.g. switchgears, earthing rods etc.

Transformers and circuit breaker terminals

Electrical holders and clamps

Railways and defense industries

Manufacturing Range:

1. Circumscribing circle diameter:

A) For Extruded Product: 4.125" Max
B) For Drawn Product: 4" Max Cross Sectional - 1/2 sq. Inch minimum.

2. Element Thickness:

A) Extruded: 4mm Min.
B) Drawn: 3mm Min.

3. Length:

A) Extruded: 50ft Max weight limit upto 55Kgs
B) Drawn: 10ft Max. Weight limit upto 55Kgs

4. Tolerance:

A) Extruded: +0.30" Min. on any dimension
B) Drawn: +0.005 Min. on any dimension

5. Temper:
Any standard desire temper

6. Material:
We can supply section in the following copper and copper based alloys.

Copper: Electrolytic Copper (ETP)

DHP Copper

DPA Copper

DLP Copper

Copper based alloy: Brass 63/37

Brass 70/30

7. Shapes:
Profiled Tubes and Rods in Reeded, Oval, Rectangle, Polugon, Square and Twisted shape.

We offer a great multitude of special shapes for our Copper Rods. Our copper ground rods are used for connectors, electrical motor components, electroplating, switchgear, ship building and power generating equipment. Sizes available in our copper rods are 5mm to 65 mm and they weigh about 50 Kg. each. We have registered our name among notable Copper Rods Manufacturers and suppliers set in India.

Sizes : 5mm to 65 mm available
Weight: upto 50 Kg. each

We have large production facilities for Copper Strips/ Bus Bars Flats and extruded and drawn flats. These are proffered in various production ranges of sizes and shapes. Our copper alloy strips are used for electrical engineering (Transformers, Switchgears, Panels, Earthing, Electrification - lines), Anodes, Components etc. The company has a celebrated identity among grade Copper Strips/ Bus Bars Flat Manufacturers and suppliers from India.

Specifcation

Specification	As per ISS, ASTM, BSS, JISH etc
Material	ETP Grade copper & DHP Grade copper
Type	As extruded & drawn
Form	Straight Length
Edges	Sharp & radius
Width	Maximum 125 mm - Minimum 10 mm
Thickness	Maximum 20 mm - Minimum 1.5 mm

UMPL has positioned itself as one of the stellar Copper Tubes Manufacturers based in India. We offer wide range of copper alloy tubes with superior quality. Our Copper Alloy Tubes and copper tube fitting are manufactured with the help of our modern facility.

Seamless Cold Drown Tubes are offered in a wide range, especially for:

Refrigeration & Air Conditioning

Condensers

Plumbing

Heating element

Lugs & terminals

Heat exchanger

Water & Gas Lines

Solar systems

Electrical Application

General Engineering

Automobile Industries

90/30 Cupro Nickel Tubes

We use a copper nickel alloy in the ratio of 90/10 to come forth with excellent Cupro Nickel Tubes. These copper nickel alloy tubes have very high erosion and corrosion resistance. They have great weld ability and are used for Condensers, Ship building, Refineries etc. They are also easy for installation.

Specification

Manufacturing range	Outer diameter - 6mm to 65 mm and Wall thickness - 0.5 mm to 15mm.
Material	90/10 Cupro Nickle (CN 102)
Nominal Composition (%)	Cu - Remainder
-	Ni - 9.0 - 11.0
-	Fe - 1.0 Max
-	Mn - 1.0 Max