Salient Features

• Specially designed for the energy saving environmental friendly heating chambers with efficient heat transfer technology.


• vqW State of the art technology in designing the insulation panels for better working environment.


• Straight-arm with four mould carrying carrier plates for economical working.


• Machine controls are equipped with necessary interlocking, safety devices with indicators and alarm.


• Microprocessor based machine control panel with digital display.


• Variable scontrolspeed a/c motors are for major and minor speed .


• Mould indexing facility.


• Environment friendly burners suitable for LPG/CNG/OIL/Duel fuels.

Models Available

• Moving oven with Turret Machines having Three Arm/4Arm.


• Moving oven with Independent 3 Arm /4 Arm with 4 Stations/5 Stations.

Range Available
Wide range of Moving Oven type Roto moulding machines having oven chamber size from 1.5 meters to 6.0 meters to produce up to 20000ltrs [5000 USG]

Salient Features

• Various thicknesses in the product are possible
• Special article like Drainage Pipes, Boats, up to 6.5 Mtr. Can e produced in Rock n Roll comfortably.
• Most economical with less investment.
• Sturdy Macbhine suitable for manufacturing large size hollow products. Up to 40000 Itrs / 10000 USG. Capacity.
• Speed drive for Rocking & Rolling for better control ovariable f the product.
• Microprocessor based machine control panel with digital display.
• [PLC on specific request.

Models Available

• Open flame with cooling station Closed oven type Rock n Roll with cooling station.
• Gas/ Oil fired Open flame with cooling station

Range Available

Wide range of Rock n Roll type Rotomoulding machines having frame size from 1.5 x 2.5 meters to 3.5 x 7.0 meters to produce up to 40000ltrs[10000USG]

Salient Features
• Specially designed for the energy saving, environment friendly heating chambers with efficient heat transfer technology.
•  State of the art technology in designing the insulation panels for better working environment.
• Straight-arm with four mould carrying carrier plates for economical working.
• Machine controls are equipped with necessary interlocking, safety devices with indicators and alarm.
• Micro process based machine control panel with digital display.
• Variable speed a/c motors are for major and minor speed controls.
• Mould indexing facility.
•  Environment friendly burners suitable for LPG/CNG/OIL/Duel fuels.

Models Available
•  Fix oven with moving carriage [station] Maximum 2 Stations.
•  Moving oven with moving carriage [station] Maximum 4 Stations.

Range Available
• Wide range of Shuttle type Roto moulding machines having oven chamber size from 1.5 meters to 7.0 meters.

Salient Features :

•  Low power consumption with high output.
•  Economical production cost with consistence output quality
•  Low maintenance
•  Minimum man power
•  Grinding disk made from graded alloy steel with wear  resistance treatment
•  Cooling provision for Stationery disk, Mill body, duct line, Bearing Housing.
•  Vibro feeder / Auto Servo control feeding system.
•  Monitoring of Powder Temperature & control system
•  Microprocessor based machine control panel with digital display.

• Scatter Coating
• Microdot Coating
• PVC Pipes & Profiles
• Textile Interlining
• Carpet Coatings
• PVC/DMC Moulded Components
• Shoe Interlining
• Evasheet Coatings
• Master Batch Mfg.

Salient Features

• Specially designed for the space saving chambers with efficient heat transfer technology.
• State of the art technology in designing the insulation panels for better working environment.
• Straight-arm with four mould carrying carrier plates for economical working.
• Machine controls are equipped with necessary interlocking, safety devices with indicators and alarm.
• Microprocess based machine control panel with digital display.
• Variable speed a/c motors are for major and minor speed controls.
• Mould indexing facility.
• Environment friendly burners suitable for LPG/CNG/OIL/Duel fuels.

Models Available

• Fix oven with turret machines
• Fix oven with independent 3 Arm /4
• Arm with 4 stations/5 stations.
• Fix oven with moving carriage shuttle type machine.

Range Available
Wide range of Fixed Oven type Roto moulding machines having oven chamber size from 1.5 meters to 6.0 meters to produce up to 20,000ltrs [5000 USG]

Salient Features

• Barrels Screws are designed for various applications with different L/D and compression ratio.


• Low power consumption with high output.


• State of the art technology in selecting special alloy steel screw and barrel with wear resistance quality


• Groove feed barrel for specific process.


• Specially developed energy efficient heaters results in energy saving with consistence output quality


• Minimum man power


• Microprocessor based machine control panel with digital display.

Optional Attachment:- Pneumatic hopper loader Chiller PLC
Models Available

• Single Screw Extruder with Palletizer.


• Single Screw Extruder with die face cutter

Range Available
Wide range of Extruder machines having Screw size from 50 mm to 110 mm to reprocess/coloring 40 Kgs-Hr. to 300 Kgs-Hr.

Our range of high speed mixers are specially designed to meet the mixing usage demands of granules with pigment paste or pigment powder or different colored granules, thus achieving uniform blending and mixing. It is also provided with thermo couple to monitor the temperature while mixing operation.
Features

• Blending Master Batch with the virgin granule


• Mixing Pigments or Pigment paste with granule or polymers powder


• Blending Pigment, Fillers additives


• Sturdy construction


• Stainless steel vessels (corrosion resistant)


• Twin jacket for heating and cooling


• Pneumatically operated lid and drain valve


• Thermo couple to monitor the temperature while mixing operation


• Timer control for energy saving Heavy duty bearing housing for trouble free working

• The SCRAP GRINDER (GRANULATORS) are commonly used by almost all the polymers processing industries like injection moulding, Blow moulding, Rotomoulding, Thermoforming Cast film, PVC, UPVC, HOPE, LDPE, PP Rigid and flexible Pipes and Articles manufacturing plants to recycle the plant waste and rejected articles during manufacturing process. And also the polymer waste recycling plants.

•  Every polymer processing industry have one scrap grinder (granulator). Without the scrap grinders or granulators no polymer processing industry will be working. Almost all polymer processing industries have scrap grinders for their convenience and economical working.

•  The scrap grinders are used to reduce the space to store the volumetric rejected articles for storing and transporting for subsequent process in the form of compact packings to handle conveniently.

•  The recycled materials either blended with the regular virgin materials in small quantities without affecting the finished products. Either using entirely with the recycled materials with separate identity or disposing to other manufacturing plants.

•  Earlier UVROTO was manufacturing the SCRAP GRINDER to cater the needs of the Rotomoulding Industries, later with the pressing demands from various polymers processing industries UVROTO has developed the new generation high efficient low noise level sturdy and compact energy efficient SCRAP GRINDERS to the needy industries.•  UVROTO is manufacturing wide range of scrap grinders to cater various polymer processing industries along with the ROTOMOULDING MACHINERIES.

•  The UVROTO Scrap grinders are equipped with sturdy mild steel fabricated main structures, wear resistant alloy steel cutting blades for efficient shearing action and its unique design to shear the lumps with

Vibro Screen (Gyratory Type) is part of our system with suitable size of machine according to the specification model of pulveriser. The Pulverisers come with specially designed vibro motor, single decked made of Mild Steel (optional), 20# S.S. screen with anti blinding ring type arrangement and basic structure made from heavy mild steel for long lasting. Provision for feeding pulveriser to recycle the coarse material for optimum output of the pulveriser.

OPTIONAL ATTACHMENT :  Pneumatic hopper loader Chiller PLC.

With the support of In-House R&D, we are a pioneer in the field  of  manufacturing PULVERISER MACHINE with   proven technology.

More  than   300   Nos.   PULVERISERS machines  are successfully running.

We are providing high quality moulds including horizontal moulds and verticle moulds. Made of finer quality material, these moulds are placed at pilot plant for quality testing. We can manufacture small size to large size moulds as per customer''s drawings and requirements.