Vaishno Pro Gen Private Limited

Afridev deep well hand pump as per SKAT (Latest Revision)

Specifications:

• 50mm dia uPVC Brass-lined Cylinder Assembly with extractable plunger and foot valve assemblies.

• Recommended for water level setting depth upto 45 Meters.

• Minimum ID of borehole - 100mm

• Approximate Discharge - 990liters per hour.

• UPVC Riser Pipe = 63mm OD X 4.7mm Wall Thickness X 3 Meter length.

• MS/SS Connecting Rod Diameter = 10mm & 12mm Dia.

• Stroke Length= 225± 6mm

• Installation Manual, Standard Toolkit & Spare Parts Kit included

A set of special tools & standard tools for every Handpumps should be stocked at the user-end for seamless operation and maintenance of the Community / Village Handpump. Our Special Tools and Standard Tools are packaged in easy to carry Boxes.

The Special Toolkit consists of:

• Self Locking Clamp for Riser Pipes - 1 No.

• Connecting Rod Vice - 1 No.

• Pipe Lifting Spanner - 3 Nos.

• Water Tank Pipe Lifter - 1 No.

• Crank Spanner (17 x 19) - 2 No.

• Connecting Rod Lifter ‘T’ type - 1 No.

• Handle Axle Punch - 1 No.

• Chain Coupler Supporting Tool - 1 No.

• Rod Coupling Spanner - 1 No.

• Bearing Mounting Tool - 1 No.

• Toolbox for above items except 1& 3 - 1 No.

Special Toolkit are supplied according to the Type of the Handpump.

India Mark II Deep well Hand pump as per SKAT (Latest Revision) Specifications with 63.5mm dia cast iron brass sleeved cylinder assembly.

• Recommended for water level setting depth: 20-45 meters.

• Minimum ID of bore: 100 mm.

• Approximate Discharge: 900 Liters per Hour.

• Cylinder Stroke Length - 125 ± 4 mm.

• Riser Pipe = 32 mm NB X 3 meter length GI, uPVC or Stainless Steel.

• Connecting Rod = 12mm X 3 meter length MS, Stainless Steel or FRP.

• Installation Manual & Fast-moving Spare parts Kit supplied along with each Pump

• SPECIAL TOOLKIT for Installation and STANDARD TOOLKIT for Maintenance will supplied exclusively.

VAISHNO also manufactures other range of India Mark Handpumps such as:

• Extra Deepwell Handpumps (for depths upto 80 Meters)

• India Mark III(VLOM) Handpump (for depth up to 45 Meters)

• Force & Lift Handpump for pumping Water to an Overhead Tank (suitable for Schools & Health Centers)

• Malda Shallow Well Handpump (for depth upto 20 Meters)

Vaushno Handpumps come with a set of Fast-Moving Spare Parts for 1 year's Operation. However we also insist that our Dealers & Partners hold adequate stocks of certain critical Spare Parts which might call for immediate replacement in the event of emergency. The Spare Parts that we supply are interchangeable with any Handpump that's manufactured as per SKAT Specifications and Standards.

Set of Standard Fast Moving Spare Parts consist of:

• Hex Bolt (M12 x 1.75 x 40) - 4 Nos.

• Hex Nuts (M12 x 1.75) - 8 Nos.

• High Tensile Hex Bolt (M10 x 1.75 x 40) - 1 No.

• Nyloc Nuts M10 - 1 No.

• Handle Axle SS - 1 No.

• Washer (4mm thick) for Axle 1 No.

• 7.Bearing (6204 Z) - 2 Nos.

• Spacer (MS) - 1 No.

• Chain with Coupler - 1 No.

• Bolt for Front Cover - 1 No.

• Nitrile Rubber Cup Washer - 4 Nos.

• Nitrile Rubber Sealing Rings - 6 Nos.

• Rubber Seating (Big) - 1 No.

• Rubber Seating (Small) - 1 No.

Apart from these we also supply other Spare Parts such as Connecting Rods, Plunger Rods, Riser Mains, Cylinder Body & Caps, Inspection Cover, Handle Assembly, etc.