Our raw mango cutting machine is indigenously manufactured. A maintenance free unit, is used SS 304 grade to reach ‘FPO’ standards. With very less ‘Churra’. It cuts mangoes in maximum square pieces. It has build in conveyors at out-put end. It is compact in size & easy for working. It is in available in various models.

Product size: One Time setting of 20x16, 25x16, 25x25mm or as per your requirement.

MODEL	120M	250M	400M	750M	900M
Capacity (kg/hr)	100-250	300-400	600-80	1100-1200	1.5-2.0T
Power	2.0HP	3.0HP	5.0HP	8.5HP	10.5HP

It is a proven mechanical system most commonly used for specially green chilly cutting. All food contact parts and structure is made of 304 grade stainless steel. Cut pieces are as per specifications or otherwise 20mm in length. It is compact in size and easy for working. It has durable SS cutting blades and a feeding arm that takes chilly to the cutting blades.

Capacity (Kg/ Hr)	100-150	400-500	900-1000
Power Req.	1.0 HP,415v	2.0 HP,415 V	3.0 HP, 415V

It is commonly used for crushing of fruits into fine paste/pieces for further operations. It is also used for making paste of ginger & garlic pods, hard material with body fibres or shreads and for wet masala ingredients before mixing. It can also be used for coarse paste, crush, mixes, multi-products crushing, pre-crush for de-hydration inputs. Useful for Tomato, Raw Mango, Amla, Pinapple, Ginger, Garlic, Onion, Steamed Potato etc.

MODEL	FM-1	FM-2	FM-3	FM-4	FM-5
Capacity(kg/hr)	25-40	200-250	400-500	800-1000	1500-2000
PowerReq.HP	1.0,230v	2.0,230v	2.0,415v	3.0,415V	5.0, 415V

It is MS/SS machine built in sprinkler system. The machine is devised in such a way that the fruit can be feeded through upper side of the drum without affecting the motion of the machine. It generates higher production with less efforts and also saves water. The peeled products are collected at the bottom side through door of the drum in running system.

MODEL	PL-I	PL-II	PL-III	PL-IV
Capacity(kg/hr)	250-300	500-600	900-1000	1.5-1.75T
PowerReq.	1.5HP,230v	3.0HP	5.0HP	7.5HP

It is useful for hard skin removing & cleaning of garlic. It is M.S. fabricated and duly spray painted. It also has a provision of separation of garlic pots, dust, skin and dead pots from the surface of garlic. Cleaning is achived by means of gentle scribing on food grade specially made rubber. Smashing is protected. Naturally dried Garlic pods gives better result. it's chemical free cleaning process.

Capacity (kg/hr)	30-40	60	100
Power Req.	3 Hp, 415V	3 Hp, 415V	1 Hp, 415V

Ribbon Mixers:-According to special demand we can supply Mixers with various designs of Blades & mixing. It is very useful for dry masalas, instant foods, kanda-lasun masala, different mixers of ready flours of eatables, pickle and basic mixing and re-mixing of products.

MODEL	RB15	RB25	RB70	RB100	RB150	RB300
Capacity(Ltr.)	65	81	150	165	205	350
Power	0.5Hp	0.75Hp	1Hp/1.5Hp	2Hp	2Hp	3Hp

Chopper Mixers:- It is useful for mixing the ready product to the limbless texture. Material can be fed from top hooper without disturbing the process of mixing.

Capacity	40Kg/hr.(Approx.)	200kg/Hr
PowerReq.	1.5Hp.,415V	3Hp,415V

Dough/Papad Mixers:- All the food contact parts of this mixer are made up of stainless steel with non stretching rollers. It is very useful for the domestic production purpose. It provides better out put and less manpower losses with minimum efforts. The pod of dough is kept in two HDPE thick sheets and then rolled for manufacturing papad.

Capacity (Kg/Batch)	10-12	40-55	40-55	100-125
Power Req.	2.0Hp,415V	5Hp,415V.	5Hp,415V	5Hp,415V

High Speed Stirrer Mixers:- This is a high-speed electro-mechanical cutting / churning system most commonly used for grinding of slurry or making smooth paste of thick parts of fruit yield. The machine consists of high speed cutting blade and a stainless steel container. Power: -0.75HP to 3HP-415V
Capacity: 25 ltr/batch to 125lit/batch.

Slicers:- They are useful for processing of onion,potato,banana,ginger,papaya & pineapple. Slicing,shreads,flakes as per req.

MODEL	SL-1P	SL-IIP	SL-IIIP	CFS-1	CFS-2
Capacity(kg/hr)	25-40	75-100	400-500	1000-1200	2000-2200
PowerReq/HP	1.5	2.00	3.00	5.00	7.5

Dicer and Slicer:- They are used for tutty-fruity,carrot & orange pills. Sizes 6*6 mm, 8*8mm,20*20mm.

MODEL	SL-IT	SL-IIT	SL-IIIT
Capacity(kg/hr)	750-900	1200-1500	2000-2200
PowerReq.	2.0HP,415v	5.0HP,415v	7.5HP,415v

Amla Shreader:- A machine suitable for Amla’s of maximum in size.It separates seeds and yield of Amla.Shreader die is of S.S.304 grade tempered steel.

MODEL	Hellen	SL-100
Capacity(kg/hr)	10-15	75-80
PowerReq.	2HP,230V	3.0HP,415V.

Dry-Coconut Shreader and Fresh-Coconut Shreader:- It is used for crushing of wet coconut.

Capacity	45to60Kg/hr.	35to45Kg/hr.
PowerReq	1.0Hp,415V	2.0Hp,415V

Dicer-Slicer and Shredding Machine:- It is suitable for potato chips,wafers,raw mango shreds for chunda,etc.It is also used for cutting pieces of tutty-frutty & vegetables. It's a domestic type trial batch/leb/home scale production machine.

MODEL	TF-75	TF-200	DS-200
Capacity(kg/hr)	60-75	200-250	500-600
PowerReq.	2.0HP,415v	3.0HP,415v	5HP,415v.

Fruit Washers:- They are useful for cleaning of raw mangoes, lemon, carrot, tomato having thick skin. The clearing is done under air pressure bubbles created in bulk volume of water. One side inlet takes the material and cleaned part of the material is carried out by means of non metallic conveyor belt at the output end. Sterilization is preformed by means of spray chamber. The output can be collected at mesh tables or on cutting belt directly.
Product size:- One time setting of 20x16, 25x16, 25x25 mm or as per requirement.

MODEL	BT-250	F-700	F-1700
Capacity(kg/hr)	200-250	700-750	1500-1750
Power	2.0Hp,230V	3.5Hp,415V	5.5Hp,415V

Bottle Washing Machine:-It has at two-way brush washing head specially designed.

MODEL	Model-'A'	Model-'B'
No. of Brush	2 nos.	4 nos.
Power	0.5 HP, 230V	1.0 HP, 415V

It is an in line pulpier with screw auger A 304 grade steel-fabricated, proven, mechanical unit which consists of pulpier with screw auger and juice-extraction is achieved by end caps. Residue is collected separately. Output is about 75-80 % (depends upon quality and season of fruits) extraction from yield by finishers. Suitable sieves are provided for fine filtration of Mango, Papaya, Ginger, Amla, Guava, etc. It also collects pulp for Jelly base, sweets, Jam base etc.

Specification : All structure parts are made from Mild steel and Food Contact Parts
(Trays) are of Aluminum. Internal top is of SS and remaining structure is in MS duly
Enamel Painted. Single phase Blowers are built in the structure. Suction and forced exhaust controls are provided as per Volume of Cabinet. Two partition multi stage tray drying unit and both side drying arrangement is made for the positive drying. The dryer unit is well-equipped
with temperature controller and with all required controls on panel.

It’s most commonly used for crushing of fruits into fine paste/ pieces for further operations. It can be used for course paste, crush, mixes, pre-crush for extracting amala juice. All are in line pulpier with screw auger and the crushing is achieved by means of end caps and very useful for rough fruit. Juice and residue is collected separately. About 60 to 70% extraction from yield built in finishers. All food contact parts are made up of S.S.304 grade stainless-steel & equipped with sieves of 1/8, 1/32 sizes respectively at required stages.

Specifications : This is the first total processing system of Aloe-Vera leaves for 'Food Grade Natural Colour Juice'. Total cleaned sterilized leaves are to be feed in the machine. The process contains the slicing, squizzing, pulping, separation of leaves and green waste, collection in settling tank, filtrations through filter. A filtered solution is taken to the heating and treatment tank.