We offer metallurgical coke, which is widely used as a primary fuel where a uniform and high temperature is required. The low ash metallurgical coal (LAM COKE) hard coke is used in blast furnace for production of pig iron & in cupola furnace for the production of cast iron. Application Area

• Widely used in the manufacture of Silico Manganese, Pig Iron
• Increase carbon content in steel manufacturing plants.
• Used in integrated steel plants, foundries, ferro alloy producers, pig iron plants, soda ash manufacturers and more.

 Composition:

Fixed Carbon	83%
Volatile Matter	2%
Sulphur	1%
Moisture	8-10%
Ash Content	13-15%
Size	Greater than 60mm

In this category, we offer two grades of Pig Iron, type I and type II. Our range is widely used within steel mill complexes. Under this category, we offer:

• Merchant Pig Iron is cold iron, cast into ingots and sold as ferrous feedstock for the steel and metal casting industries. This is available in three forms such as:
  • BASIC PIG IRON used mainly in electric arc steel making.
  • HAEMATITE PIG IRON [also known as FOUNDRY PIG IRON], used in mainly in the manufacture of grey iron castings in cupola furnaces.
  • NODULAR PIG IRON used in the manufacture of ductile [also known as nodular or spheroidal graphite - SG iron castings. Pig iron contains at least 92% Fe. We offer Grade I and Grade II pig iron: Grade I: Used in steel plants

Composition:

Carbon	3.8 % to 4.2%
Silicon	1.25% Max
Manganese	0.4 % to 0.6 %
Sulphur	0.05%
Phosphorus	0.12% Max

The grade II of the Pig Iron is widely used in foundries.

Composition:

Carbon	3.8 % to 4.2%
Silicon	2.0 to 2.5 %
Manganese	0.4 % to 0.6 %
Sulphur	0.05%
Phosphorus	0.12% Max

It acts as the key raw material for the manufacture of steel. The quality of sponge iron is primarily ascertained by the percentage of metallization (removal of oxygen), which is the ratio of metallic iron to the total iron present in the product. The properties of sponge iron we offer are: Sponge Iron – Lumps:

Fe Total	88% ± 2%
Fe Metal	76% ± 2%
Metallization	85% ± 2%
Sulphur	0.05 % Max
Phosphur	0.06% Max
Carbon	0.2% Max
Fe Total	88% ± 2%
Size	4 to 20 mm

Sponge Iron – Fines:

Fe Total	85% ± 2%
Fe Metal	70% ± 2%
Metallization	78% ± 2%
Sulphur	0.05 % Max
Phosphor	0.06% Max
Carbon	0.2% Max
Size	1 to 4 mm

This silico manganese is predominantly used in the manufacture of steel. It comprise of the following:
 

Manganese	64%
Silicon	15%
Carbon	2.50%
Phosphor	0.30%
Sulphur	0.04%

We offer high carbon ferro manganese, which is very suitable for making special steel. The composition includes:

Manganese	75%
Carbon	7.50%
Silicon	2%
Phosphur	0.30%
Sulphur	0.03%

Ferro silicon can be availed from us in size of 10 mm to 60 mm. The following composition in which it can be availed from us are:

Silicon	75%
Aluminum	1.5% Max
Carbon	0.2% Max
Sulphur	0.02% Max
Phosphur	0.04% Max

We offer shredded scrap of 70 lbs/cubic ft. Leveraging on our high end sourcing capabilities, we can also offer shredded scrap of ISRI 210 and ISRI 211. These can be availed from us at industry leading prices.

Consolidating on our high end sourcing abilities, we offer heavy melting scraps HMS 1 and HMS 2 to our clients as per their requirements. we offer these at competitive rates.