We are manufacturing acrylic coatings in the name of 'SAKCRYL- PAB-201’ which are used for all type of plastics like HIPS/ABS, PC and many more. These coatings work as an excellent adhesion on the moulded substrates for audio/T.V. Cabinets. Other then its unmatched economical prices, it comprises the following features:

• Available in single pack
• Air-drying feature
• Spray able coating.
• Formulated from thermoplastic acrylic resins.

Our polyurethane coatings are manufactured in the name of ‘P0LYMICA-PL-60’, which can be applied over Epoxy and Polyurethane Primers, intermediate coats and topcoats. These are two components, air-drying aliphatic and non yellowing polyurethane finish coating. We are providing these coatings in a range of colors with outstanding color retention properties. Following are the features of these coating and further, their usage:

• Weathering & abrasive resistance
• Durability on outdoor exposure
• Resistance to saline and marine atmosphere

Their usage:

• Excellent gloss, color retention and non-yellowing properties, against ultra violet rays and weathering.
• Used as a topcoat with suitable primers and undercoats for use in high chemical and saline atmosphere for better aesthetics and corrosion resistance
• Used as finish coat for machinery & equipment
• Recommended as a topcoat for premium OEM painting.

We are a prominent name in producing ‘EPITEX-EP-II’ epoxy coatings, which are available in a range of colors with excellent color retention properties. These coatings are two component-glossy epoxy paint containing anti-corrosive pigmented and hardener-aliphatic isocyanate. Being resistant to chemical & abrasion, following are the areas where these are extensively used:

• Used as a finish coat for building frame works, tubular bridges, conveyors and other steelwork and equipment.
• Recommended for steel, aluminum masonry or fiberglass when properly primed

Our acid alkali resistant coatings are supplied in the name of ‘EPITEX-CT-1’. Because of its impermeability to water & oxygen, it shows promising results as an anti-corrosive, seawater resistant coating. These are extensively used in marine industry, pipelines in thermal plants, structural steel work, inside & outside penstocks and even harbor installations for fresh & salt water. Following are the features of our acid alkali coatings:

• A two component-heavy duty coal tar epoxy paint having high percentage of epoxy contents.
• Excellent adhesion
• Toughness
• Abrasion resistance

Our ready to use ‘VEELAK-AP’ specialty coatings has been provided with high gloss acrylated polyester paint. With their good adhesion on varied surfaces, these are used as an industrial finish for gensets, compressors, agricultural equipment, haulage equipment etc. These can be used over surfaces prepared with N.C, Q.D and Sealer coat, Red-oxide & Zinc Chromate. Following are the features which make these coating so demanding:

• Provided in single pack
• Air-drying feature
• Work as a topcoat for steel surfaces

We are manufacturing two kinds of wood coatings namely ‘WOOD LAK’ and ‘TOUGH WOOD’, which provide long lasting service and resistance to various problems. Following are the two kinds with their respective features:

‘WOOD LAK’:

• Merchandised wood lacquer, two-component melamine resin based lacquer for polishing treatment on all type of wood.
• 'Woodlak' is designed for interior applications as it has excellent adhesion, durability & chip resistance feature

TOUGH WOOD’:

• A two-component urethane coating for wood furniture
• Tough wood has stain resistance, mark resistance and durability, flexibility and light stability

Our water-proofing sealer coatings are available in varied forms namely ‘WAPRO-221, WAPRO-LP’ and ''DEEBOND-50'' and ‘FLEXSEAL’. Following are the respective features of these coatings:

’WAPRO-221 & WAPRO-LP’:

• WAPRO-LP Finish paint over WAPRO-221 base coat gives a tough, durable and weather resistance film.
• It is based on single pack synthetic polymer, excellent adhesion on wet ant dry concrete surface.

‘DEEBOND-50’:

• Inorganic permeable water proofing agent.
• It is used as a water proofing agent in damp or wet surface or can be applied on slab or terrace under raining conditions.

‘FLEXSEAL’-“FLEXIBLE CEMENTITIOUS WATERPROOFING MEMBRANE”:

• A two-component polymer modified cementitious water proofing coating for concrete and masonry surface.
• FLEXSEAL is non-toxic and can be applied on damp or wet surface.

We are manufacturing varied coatings with excellent properties. Following are the types of coating we are manufacturing with their features:

‘CAST-O-FILL’-“CASTING SEALER/PRIMER”:

• Alkyd based fast drying single pack casting sealer primer. It is used as primer/sealer for foundry CI castings.

‘CLEAR LAK-M’-“ANTIQUE PROTECTION COATING”:

• These are modified acrylic resin based available in single pack with air-drying feature. These are used used as antique protection coating.

‘FLEXOTEX-120’-“HEAVY DUTY FLEXIBLE JOINT FILLING COMPOUND” :

• This coating is designed for easy application by pouring, filling & self-leveling two component, it is a less solvent and a flexible material.
• It has excellent mechanical & elastic properties

We are manufacturing floor coatings & gangway marking in the name of ‘HARD-TOP 1-2-3’- “POLYURETHANE FLOOR COATING” and ‘EPITEX-FL’-“EPOXY FLOOR COATING”. Apart from their varied shades available, it comprises the following features:

• Two-component P.U. coating that provides uniform protection against heavy traffic and abrasion proof, having good chemical resistance and it even minimizes wear & tear.
• It is applicable on clean, dry concrete surface where smooth, dust proof coating is required.

Our water based paints are one of the most safest paints used for protecting, decorating (example: color for interior or exterior walls) on surface. These paint are a kind of water based liquid or a liquid composition when applied to a substrate in a thin layer gets converted into a solid and strong film.