Being a quality driven firm, we are also one of the few leading companies, to offer drawout panels that consists of following parts:

* Spring loaded scraping earthing provided with first make and last brake arrangement.
* Maximum eight numbers auxiliary busbar center provide in top chamber and segregration from HBB zone.
* Large cabling space with adequate cable supports are provided in CBC.
* Incoming and outgoing stab in type power contacts up to 800Amps that provide very large range of feeders of different types.

Some of the salient features that our drawout panel have are:

Fully compartmentalized design
Totally enclosed vermin and dustproof.
Safety shutters provide accidental contact from vertical busbars.
Latest design of our Drawout encloser provide maintenance free vertical busbars without joint.
Self aligning and disconnecting power and control contact.
Smooth movement like Drawout and insertion of module.
Modular construction with wide choice of compartment size.
Standard module size minimum 225mm and upto 1500mm height in step of 75mm.
Bolted design and assembly allow ease of alteration or extension at site.

Incoming and Outgoing contact assembly from 63A to 630 A


We are also one of the few leading firms to offer drawout panel accessories that consists of adequate cross section of copper contacts with silver plating. Designed in accordance to international standards our drawout power contacts of all rating are type tested at CPRI for 50 kA for 1 sec. with temperature rise and milli volt drop.

1.Sliding Rail:Economical design of our sliding rail tempted most of the panel builders to use in their drawout trollies.
2.Cranking Mechanism:Used in drawout trollies, our screw type cranking is needed very much to overcome the contact pressure.
3.Safety Shutter: A dropping shutter shrouds vertical busbar and incoming male contacts when trollies are removed from the compartment.
4. STI. LOCATOR: Service, test and isolate indicator.

1. SIC BLOCK - 5 WAY: 20Amp 5 way secondary isolating contacts assembly.

Justifying our position as the leading manufacture of premium quality products, we at Vinayak Electrical Pvt. Ltd., offer post type indoor insulators. Made from premium quality raw components, the shape of insulator is determined by location, capacity and rating of busbar and environment conditions. It is highly suitable in conditions where short time current withstand capacity is not important or not required.

Cat. No	A	B	C	Insert
5340	20	8	30	M5/M6
5341	20	5	25	M5/M6
Mat/DMC	Colour Brick Red

We are also proud to state that we are pioneer to develop the concept like SMC horizontal and vertical busbar supports in place of old conventional laminated sheet. At Vinayak Electrical Pvt. Ltd. our finger type SMC busbar supports are suitable for medium volt busduct, risingmians, PCC and MCC upto 6000 Amp.

Where reliable type testing is a prime requirement our finger type supports are tested in CPRI for more than 50 kA for 1 second ad thermal with 110 kA peak for dynamic strength. Our designed horizontal and vertical busbar support can be further classified as :

*FINGER TYPE SINGLE BUSBAR SUPPORTS
*FINGER TYPE DOUBLE BUSBAR SUPPORTS

Note:

DROPPER TYPE SUPPORT: We at Vinayak Electrical Pvt. Ltd. also offer Dropper Type Supports that are widely used to support vertical busbars in PCC/MCC and also for incoming and outgoing drawout contacts fixing. These supports also type tested in CPRI for 50 kA for 1 second with 110 kA peak, that to economical centre distances. Our dropper type support can be further classified as :

*TP DROPPER SUPPORTS
*TPN DROPPER SUPPORT
*TPN GOING CONTS FIXING SUPPORT
*TP GOING CONTS FIXING SUPPORT



TP GOING CONTS FIXING SUPPORT: We also offer TP Going Conts Fixing Supports that are specially useful for smaller rating switchboard, MCC / PCC busduct, and risingmains. If centre distance between support adjusted, these support also can withstand a fault level of 50 kA for 1 sec.

*TP BUSBAR SUPPORT ( 60 CRS )
*TPN BUSBAR SUPPORT ( 60 CRS )
*TPN BUSBAR SUPPORT ( 80 CRS )

Cat No.	Cap.	A	C	D
5236	1x6	7.5	9	13
5237	1x10	10.5	9	13
5238	1x12	13.5	9	13
Mat	- DMC /SMC

TP Dropper Supports

Cat. No	Cap
5202	800A TP
Mat	DMC/SMC

TPN Dropper Support

Cat. No	Cap
5201	800A TP
Mat	DMC/SMC

TPN Dropper Support (Special Type)

Cat. No	Cap
5207	800A TPN
Mat	DMC/SMC

Vinayak is the first company in India who had developed and made popular, todays concept of SMC horizontal and vertical busbar supports and busbar support insulators in place of old conventional laminated sheet.

Vinayak finger type SMC Bubar supports are suitable for medium volt busduct , risingmains, PCC and MCC up to 6000 Amp. Where reliable type testing is a prime requirement. Out finger type support are tested in CPRI for more than 50 kA for 1 second as thermal with 110 kA peak for dynamic strength Vinayak supports are tested more than 75 times in last 26 years.