Antistatic & Electrically Conductive Polyurethane Hoses

• For aggressive solids such as dust, powder, fibers, chips and granulates
• For aggressive gaseous and liquid media
• For vacuum cleaners, conveying systems, blowers and compressors.

• Electrical and surface resistance <10¢XƒÇ
• Medium-heavy model
• Good resistance to mineral oils
• Good resistance to alkails and acids
• Extremely good resistance to chemicals
• Small being radius
• King-proof
• Free of softener and halogen
• Gas and liquid tight
• Conforms to the requirement5s of the European ATEX guideline
• Conform to RoHS guideline
• Capable of electro-static discharge (according to BGR 132, formerly ZH 1/200) by grounding the spiral.

• Wall : electrically conductive polyethylene (PE)
• Spiral : spring steel wire

• -35¢XC approx. to +80¢XC approx.

Fully Conductive PFA Chemical Hose

APPLICATION :

• Universal hoes “Full Ohm” specifically designed to handle cosmetic pharmaceutical and highly flammable chemical products in working areas requiring maximum safety.
• Engineered to ensure the dissipation of electrostatic currents not only superficially, but also through the hose wall (Resistivity : <10)
• Fluorinated, ultra smooth, inert liner of the newest generation ensuring utmost degree of impermeability, resistance to dynamic stress and hygienic delivery of the medium.
  

CONSTRUCTION TUBE:

• PFA (Perfluoralcosy Polymer), fully fluorinated, smooth, mirror-like, black antistatic and patented quality. It guarantees
• No pick-up of taste and odour.
• Excellent flex-performance (resistance to repeated cycles of bending in accordance with ASTM D 2176.
• Utmost chemical and temperature resistance.
• For foodstuff contact : material complying with USA Federal Drug and Cosmetic Act Title 21 P.177.1550 (FDA) and meeting US Pharmacopeia (USP 23 Class VI).
• Electrostatic dissipation acc. To EN 12115 and EN 50014/IEC 60079-0.

REINFORCEMENT:

• High strength plies of synthetic cord, embedded steel wire helix and built-in copper wires to ensure the dissipation of static electricity.

COVER:

Marble finish, patented, fully smooth, offering the following benefits :

• Electrostatic dissipation acc, to EN 12115 and EN 50014/IEC 60079-0.
• Abrasion resistance acc. To ISO 6945 and SAE J 2006.
• Low-friction rate during dragging operation, which appreciably improves the handling especially when the hose is full.
• Non-training of contact surface.
• Food validation sec to FDA Title 21 P. 177 2600 (E,F).
• A very smooth outer which is easily washable with any detergent products.
• Utmost chemical resistance in case of accidental contact with the aggressive chemical conveyed in the hose.
  

TEMPERATURE RANGE:

• From -40°C up to +150°C (depending on products and concentrations). In case of dynamic application : from +10°C up to 60°C acc, to fluids.
• Disinfection with chemical and steam up to 164°C for a maximum time of 20 minutes (both inside and outside).
  

SAFETY FACTOR : > 4 times working pressure.

TOLLERANZE DIMENSIONAL:

• Diameter : ISO 1307- Length : ISO 1307 – Wall Thickness : DIN 7715 T4 S2

Petroleum Hoses

• Suction and delivery hose to convey mineral oils and fuels with an aromatic content up to max. 60%.
• Specifically designed for long life service under heavy duty working conditions.
• Execution meeting the standard 1761.

• NBR rubber, black, smooth, antistatic (R < 106 Ohm).

• High strength plies of synthetic cord.
• Embedded steel helix wire.
• Built-in copper wires.

• NBR rubber, black, smooth, antistatic (R < 106 Ohm), self-extin­guishing, resistant to abrasion, ozone, ageing and mineral oils, cloth finish.

• From -30°C up to +80°C.
• Peaks at max. +100°C depending on conveyed media.

Fully Conductive UPE Chemical Hose

APPLICATION

• Universal hose to convey manifold chemical aggressive products.
• For suction and discharge service.
• Meets the standards EN 12115 and EN 500/14/IEC 60079-0.
• Engineered to ensure the dissipation of electrostatic currents not only superficially, but also through the hose wall (Resistivity: <10 ohm)

CONSTRUCTION TUBE:

• UPE (Ultra High Molecular Weight Polyethylene), black, smooth, conductive.
• Resistance : according to the MTG Chemical Resistance Chart.

• Piles of high strength synthetic cord.
• Embedded steel helix wire.
• Copper wires upon demand.

• EDPM rubber, black, smooth, antistatic (Resistivity: <10 ohm), resistant to abrasion, ozone and weather, cloth finish.

• Longitudinal blue-white stripe MTG MANICHEM UPE.
• Longitudinal embossed tape meeting EN 12115.

• Identification symbol : - Resistance < 10 Ohm.

• From -35°C up to +100°C
• Resistant to steam up to +130°C for a maximum time of 30 minutes.

Non Conductive UPE Chemical Hoses

APPLICATION :

• Versatile hose for suction and delivery of a variety of chemical, alcoholic and foodstuff products.
• Normally installed on tank trucks, discharge platforms, mobile equipment or recommended for inplant applications in laboratories, food and chemical industries.

CONSTRUCTION TUBE:

• UPE (ultra High Molecular Weight Polyethylene), clear colour,smooth, mirror-like.
• Liner approved by BgVV and complying with FDA standards as well as M.D. 21.03.73 and following amendments.
• Resistance: according to the MTG Chemical Resistance Chart.

REINFORCEMENT:

• Plies of high strength synthetic cord.
• Embedded steel helix wire.
• Built-in copper wires.

COVER:

EPDM rubber, black, smooth, antistatic (R < 106 .), resistant to abrasion, weather and ozone, cloth finish.

MARKING

Longitudinal blue-white stripe MTG POLYSPIR UPE – FDA - BgVV.

TEMPERATURE RANGE

• From – 35°C up to +100°C.
• Resistant to steam up to +130°C for a maximum time of 30 minutes.

SAFETY FACTOR > 4 times working pressure.