High Temperature & Furnace Hoses

• For suction of engine exhaust gas
• For Hose Reel
• For above and below floor suction extraction

• Vibrant Resistant
• Crush Proof
• Highly Flexible and Compressible
• Flow-optimizing exterior folds
• Fabric reinforced
• Good resistance to chemicals
• Small bending radius
• Gas and liquid tight
• Minimum weight
• Conform to RoHS guideline.

• Wall : EPDM/PP coated fabric
• Spiral : special hollow plastic helix

• Exhaust gas Temperature to +200°C

Hose composed by two ply of special fabric, asbestos-free, braided with a very thin wire reinforcement (V4A).

Special chemical treatment and additional coating allow the fabric excellent protection against heat. Its external steel hellix offers excellent protection to abrasion. This host is flame-proof and no toxic as silicon is not used.

Features :

• Color : Grey (Red on request)
• Standard Length : 3 or 6 m
• Operating Temperature : -150°C to + 650°C (peaks of +750°C)
• Axial Compressibility : 25 % of length

Applications :

Suction of gas from motors for car and armaments industry. For furnace construction and motor assembling in general. For iron and steel industry with high temperature.

Constructed using EPDM rubber, clear in colour, dielectric and smooth, these furnace hoses find extensive application in steel mills and siderurgic/metallurgic field. Resistant to heat and temperature, these hoses are highly durable and available in different specifications. 

• Dielectric rubber hose specifically conceived for the delivery of cooling water during cooling processes of electrical transformers and frequency converters.
• Normally used in steel mills and siderurgic/metallurgic field.
• The special outer glass fiber protection withstands splashes of incandescent material and radiation heat up to +400°C.
• Dielectric strength 2 5000 V/mm.

CONSTRUCTION TUBE:

• EPDM Rubber, clear colour, dielectric, smooth. (Dielectric strength 2 5000 V/mm)

REINFORCEMENT:

• High resistance textile plies.

COVER:

• EPDM rubber, clear colour, abrasion and ozone resistant, covered with vulcanised glass fiber.

MARKING

• Upon demand.

TEMPERATURE

• From -35° up to +120°C depending on media conveyed.

SAFETY FACTOR

• 23 times working pressure.

FITTINGS

• With pressed-in couplings, safety clamps, collars and/or other systems required by plant constructors.