Concrete Testing Equipments(Civil Engg Lab Eqp's) |
|
|
We offer an array of high performing and accurate Concrete (CIVIL ENGINEERING LABORATORY) Testing Equipments to our clients, which are used in various research centers and labs. We offer the following under this category:
|
 | Cylindrical Moulds | | |
| Cylindric Moulds are manufactured as per IS : 10086. Following Sizes are manufactured : |
| Beam Mould | | |
| Following sizes are manufactured : |
| Concrete Permeability Apparatus | | |
| One of the essential characteristics of concrete is to determine permeability of water through specimen. VEEKAY Permeability apparatus is used for determining the permeability of cement mortar and concrete specimens of 15cm cubes cast in the laboratory.
Specification :
The concrete permeability apparatus comprises of a brass / gunmetal cell of Square/Round cross-section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and T-connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. The cell assembly consists of one base plate, one metal funnel and one top plate. The pressure chamber is fitted with a pressure regulator which helps in regulating the pressure from 0-15kg/cm sq. Gauge is for indicating the pressure in the cell. A foot pump and a pressure tube is supplied to develop pressure in the chamber. The apparatus is supplied with a measuring cylinder 500cc to measure percolated quantity to water. Single Cell & Three Cell Models are available. |
| Laternal Extensometer | | |
| This is for determining the lateral extension of 15cm dia x 30 cm high cement concrete cylinders while testing them under compression. |
| Laboratory Concrete Mixer | | |
| Concrete mixer laboratory type, electrically operated. It is Designed to remove the burden- some work of hand mixing. Uniform thoroughly mixed batches can be produced. The counter balanced drum is easy to tilt 1.1/2 to 2cu.ft.mix. The total drum volume is however 3cu.ft. Mounted on a sturdy rubber tyred stand, and the drum is mounted for end discharge and equipped with end towing pole. Equipped with ½ h.p. electric motor. Suitable for operation on 220/230 volts A.C. single phase. |
| Cube Moulds | | |
| CUBE MOULDS with base plate are available in different size. These are Manufactured as per the Indian and British Standards. For the metric size cube moulds the faces are machined flat to +/-0.2mm accuracy and finished to within 0.2mm. For the inch size moulds, the faces are machined flat to +/-0,01 inches and finished to within 0.01in. Following sizes are manufactured : |
| Longitudnal Compressometer | | |
| It is designed for finding out the deformation and strains on 15cms. Diameter and 30 cms high cement and concrete cylinders when subjected to compressive loads. |
| Vee Bee Consistometer | | |
| The instrument is used for workability as well as consistency of fresh concrete. A slump cone and a graduated rod supplied with the instrument helps the operator to find out slump values and vibration table with container and acrylic disc is used to find out workability of concrete expressed in vee bee degrees, which is defined as the time in seconds to complete required vibrating at which the fresh concrete flows out sufficiently to come in contract of the entire face of acrylic disc. specification : the equipment consists of : a vibrating table size 380mm long and 260mm wide, resting upon elastic support at a height of about 305mm above the
floor, complete with start/stop switch, cord and plug. A holder is fixed to the base in to which a swivel arm is telescoped with funnel and guide swivel arm is also detachable from the vibrating table. The divisions of scale on the rod record the slump of the concrete in millimeters. Supplied complete with a sheet metal container with lifting handles which can easily be fixed to the vibrating table. A slump cone open at both ends with lifting handles and a tamping rod of size 16mm dia and 600mm long rounded at both ends.
|
| Concrete Test Hammer | | |
| The concrete test hammer is an instrument which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. The principles
on which it works are based on the rebound impact of a hammer on a piston which rests against the surface of the concrete products. The Greater the resistance of the concrete, greater is the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the instrument, the resistance to compression in MPa or PSI can be found, with 20% of actual.
|
| Air Entertainment Meter | | |
| Air Entrainment Meter Conforms to IS 1199 1959 & BS 1881-106
Air entrainment meters are used to determine air entrained in freshly mixed concrete by pressure method.
Specification :
The apparatus consists of a pressure tight flanged cylindrical measuring bowl of 0.005 cubic meter capacity for maximum size of aggregate 38mm. The bowl is fitted with a removable flanged conical cover assembly with the help of a seal. The conical cover has an air valve and a petcock for bleeding off the water. A transparent cylindrical stand pipe which is graduated in air content is fixed to the conical cover assembly. Pressure is applied to the specimen with the help of a pressure bulb and the pressure is recorded on the pressure gauge which is mounted
on the stand pipe. The whole assembly is mounted on a flat base. The instrument is supplied complete with one each following accessories.
|
| Needle Vibrator | | |
| It is an apparatus used more often at civil construction sites. The Unit comprises of, a motor
| >> My Catalog >> Concrete (CIVIL ENGINEERING LABORATORY) Testing Equipm |
which is fixed on a swivel base that drives a flexible shaft, which in return, vibrates the needle in around 10,000 vibrations per minute. Its dimensions are 25mm dia. x 350 mm long needle
with 1 meter long flexible shaft. It is Used for proper mixing of concrete, to ensure that concrete pour is free of air bubbles and
also to ensure that the concrete pour is even with a smooth finish.
|
| Vibrating Table | | |
| The UNIT consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means off-balance masses rotating on a shaft of a vibrator clamped
to the underside of the table top. The table top is 50cm x 50cm and has stops along its edges to prevent moulds from walking off the table during vibration . A crass arm adjustable on a vertical rod at the centre of the table is provided to hold the moulds while operating the between a maximum of 3600 vibrations down to 2600 vibration per minute. A speed regulation handle is provided for increasing or decreasing frequency. A switch is provided for
starting the motor. Suitable for operator on 440 Volts, A.C. Three Phase, 50 Cycles.
P.S ** : Table Size : 75cm x 75cm & 100cm x 100cm also available.
|
| Curing Tank | | |
| The tank has been Manufactured to accommodate 150mm/70.6mm cube moulds upto 36/72 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re- circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal
conditions and refrigeration system for grey cement the temperature is controlled at 35oC or 100oC ± 2oC / 27oC +2oC , expect for the 15 minutes after immersion of the freshly made specimens.
|
| Cube Testing Machine- Electrically Operated | | |
| It is used for determining the Compressive Strength of Concrete Cubes & Cylinders upto 20cm dia and 30 cm in height. ‘VEEKAY’ manufactures Compression (Cube) Testing Machine from 1000 KN upto 5000 KN. ‘VEEKAY’ manufactures Hand Operated Model, Electrically Operated Model, Digital/Electronic & Computerized Model as per clients requirement. |
| Compression (Cube) Testing Machine- Manually Operated | | |
| We are manufacturing Compression (Cube) Testing Machine- Manually Operated. Our clients can avail from us a wide array of Compression Testing Machine, which is offered at cost effective prices. Highly accurate, this machine is manufactured using quality material. We offer different type of compression testing machines that includes Electrically Operated Model, Digital/Electronic & Computerized Model as per clients requirement. |
| Slump Test Apparatus | | |
| It is used for the determination of workability of concrete where nominal size of aggregate does not exceed 38 mm. |
| Compaction Factor Apparatus | | |
| It is used for determining the workability of concrete provided the nominal maximum size of the aggregate does not exceed 38mm. It Consists of two hoppers and a cylinder mounted on a rigid frame. The inside surfaces are machined smooth. |
| Digital / Electronic Compression (Cube) Testing Machine | | |
| Capacity 3000 KN (300 Tonnes) / 5000 KN (500 Tonnes) |
|
 Product
Showroom View all our products / services as a slide show. play now
|
