|
We are recognized as one of the leading manufacturers and exportes of Veekay Veekay Rock Testing Equipments widely used in various industries, these equipment are known for their excellent performance and longer working life. We offer the following under this category:
|
 | Rock Testing Equipments | | |
| It is Suitable to cut/drill cores of concrete, rocks, stones, tiles or the similar materials. The machine is suitable for core samples of size upto 150 mm diameter with the help of diamond bits at extra cost. |
| Rock Bolt Pull Out Test | | |
| It is designed to measure the working and ultimate capacities of rock bolt anchors. The system comprises of a central hole jack, hand pump with a load gauge, directional control value (only for central hole jacks above the capacity of 500 kn), flexible hose pipe 5 mts, truss high tensile bolts with coupling. In general the pull out force is indicated on the load gauge, however a load cell with digital indicator can be used to measure the pull out load. Arrangement is provided for fixing the dial gauge for estimating deflection against the load. |
| Brazilian Test Apparatus | | |
| It is used for testing specimen from 50mm dia to 100mm and of thickness of half the diameter. This is to test for indirect measurement of tensile strength of rocks. The specimen is held in circular jaws, this is primarily similar to a compression machine and consists of a small load frame having sturdy base with two vertical threaded rods and an adjustable cross head. The hydraulic jack is fitted at the centre of the base of the load frame. The jack of the load frame is self retracting and two plain platens are supplied. A pressure gauge capacity 0-100 kn x 1 kn is fixed at the base of jack. A maximum pointers is also provided on the gauge, a pair of semi circular platens for 50mm dia samples also provided. The instrument can be used in field also.
Optional Extras :
Pair of jaws for samples dia
(a) 60mm
(b) 70mm
(c) 80mm
(d) 90mm
(e) 100mm. |
| Core Cutting & Grinding Machine | | |
| It is designed for cutting and grinding cylindrical rock specimens upto NX size. The outfit includes 200mm dia diamond impregnated cutter, a fine diamond impregnated grinding wheel a water supply system and sampler holder. A V-Vice, to hold the sample up to 55mm dia x 140mm long to be cut parallel and square to the longitudinal axis is provided. Cores longer that 140mm can be prepared by reversing the specimen and holding. against the vice, A hand feed arrangement is provided to facilitate the specimen with a uniform and smooth feeding motions. This unit is provided with a 1 HP, Single Phase, 230 V A.C. Motor.
|
| Polishing & Lapping Machine | | |
| Features :
Compact table model.
20 cm dia top and Adapter to hold polishing cloth or paste.
Sample Holders to accommodate upto NX size Cores.
Continuous water feed arrangement during operation.
Technical Specification :
This unit is provided with a 1 HP Single Phase, A.C. motor This bench mounted single spindle lapping machine is Ideally suited jar the final polishing of mounted rock or concrete specimens. Two sample holders of sample size ordered for are provided with each machine as standard supply Sample holders of other size can also be provided on request. This is a motor driven unit with 450/500 rpm. A swing-in tap, for continuous water supply during operation is also provided. This unit is operated on Single Phase. 230 V A.C. motor. |
| Core Cutting Machine, Motorised Model | | |
| It is Suitable to cut/drill cores of concrete, rocks, stones, tiles or the similar materials. The machine is suitable for core samples of size upto 150 mm diameter with the help of diamond bits at extra cost.
Features :
- Rated Voltage: ~220 V / 50Hz
- Power Input: 2800W
- No-Load Speed: 840rpm
- Max. bit diameter: Ø50mm/100mm/150mm
- Shaft Male: 1 1/4"UNC
|
|
Rock Bolt Pull Out Test |
|
|
It is designed to measure the working and ultimate capacities of rock bolt anchors. The system comprises of a central hole jack, hand pump with a load gauge, directional control value (only for central hole jacks above the capacity of 500 kn), flexible hose pipe 5 mts, truss high tensile bolts with coupling. In general the pull out force is indicated on the load gauge, however a load cell with digital indicator can be used to measure the pull out load. Arrangement is provided for fixing the dial gauge for estimating deflection against the load.
|
|
Brazilian Test Apparatus |
|
|
It is used for testing specimen from 50mm dia to 100mm and of thickness of half the diameter. This is to test for indirect measurement of tensile strength of rocks. The specimen is held in circular jaws, this is primarily similar to a compression machine and consists of a small load frame having sturdy base with two vertical threaded rods and an adjustable cross head. The hydraulic jack is fitted at the centre of the base of the load frame. The jack of the load frame is self retracting and two plain platens are supplied. A pressure gauge capacity 0-100 kn x 1 kn is fixed at the base of jack. A maximum pointers is also provided on the gauge, a pair of semi circular platens for 50mm dia samples also provided. The instrument can be used in field also.
Optional Extras :
Pair of jaws for samples dia (a) 60mm (b) 70mm (c) 80mm (d) 90mm (e) 100mm.
|
|
Core Cutting & Grinding Machine |
|
|
It is designed for cutting and grinding cylindrical rock specimens upto NX size. The outfit includes 200mm dia diamond impregnated cutter, a fine diamond impregnated grinding wheel a water supply system and sampler holder. A V-Vice, to hold the sample up to 55mm dia x 140mm long to be cut parallel and square to the longitudinal axis is provided. Cores longer that 140mm can be prepared by reversing the specimen and holding. against the vice, A hand feed arrangement is provided to facilitate the specimen with a uniform and smooth feeding motions. This unit is provided with a 1 HP, Single Phase, 230 V A.C. Motor.
|
|
Polishing & Lapping Machine |
|
|
FEATURES : Compact table model.
20 cm dia top and Adapter to hold polishing cloth or paste.
Sample Holders to accommodate upto NX size Cores.
Continuous water feed arrangement during operation.
Technical Specification :
This unit is provided with a 1 HP Single Phase, A.C. motor This bench mounted single spindle lapping machine is Ideally suited jar the final polishing of mounted rock or concrete specimens. Two sample holders of sample size ordered for are provided with each machine as standard supply Sample holders of other size can also be provided on request. This is a motor driven unit with 450/500 rpm. A swing-in tap, for continuous water supply during operation is also provided. This unit is operated on Single Phase. 230 V A.C. motor.
|
|
Core Cutting Machine, Motorised Model |
|
|
It is Suitable to cut/drill cores of concrete, rocks, stones, tiles or the similar materials. The machine is suitable for core samples of size upto 150 mm diameter with the help of diamond bits at extra cost. FEATURES : Rated Voltage: ~220 V / 50Hz
Power Input: 2800W
No-Load Speed: 840rpm
Max. bit diameter: Ø50mm/100mm/150mm
Shaft Male: 1 1/4"UNC
|
|
 Product
Showroom View all our products / services as a slide show. play now
|
