X
Hi
terms privacy policy
Verifying...
1

Have a requirement?
Chat with us

Hi
terms privacy policy
Verifying...
1

Have a requirement?
Chat with us

Veespa Paints And Chemicals Pvt. Ltd.

Established in the year 2005, at Pune (Maharashtra, India), we, “Veespa Paints & Chemicals Private Limited,” earlier known as "Colour- tech paint" are a well-known manufacturer and supplier of a qualitative range of Epoxy Paints, Heat Resistant Paints, Stoving Finishes, Specialty Coatings, etc. These products are precisely processed using superior quality chemicals with the aid of sophisticated machines under the supervision of our quality controllers in compliance with international quality standards. The offered range of products is tested on set quality parameters in order to ensure high purity and effectiveness. Our products are widely demanded across various industries due to their accurate composition, longer shelf life, resistant to acid, Eco friendly. Apart from this, we offer these products in various packaging options as per the specific needs of our valuable clients.

 

Our organization is backed with the state-of-the-art infrastructural facility, which helps us in processing these products in line with global standards. Our infrastructure unit comprises of various sub-functional departments such as production, quality testing, packaging, procurement, warehousing, etc. in order to ensure smooth flow of the entire business operation. Each unit works in close co-ordination with each other to maintain the business procedures in a smooth manner. Apart from this, our state-of-the-art infrastructure is followed by our well-equipped production unit that enables us to meet the bulk and urgent requirements of the clients within the committed period of time. In order to offer a superior quality range of products, we have employed a skilled team of professionals. They are familiar with the modern production techniques and machines that are installed in our manufacturing unit. Apart from this, we ensure that our professionals are provided with a motivating work environment and all the basic facilities in order to carry hassle free business operations. With the support of our skilled workforce, we are able to undertake bulk orders of clients in best possible manner.

 

Being a quality oriented company, We make sincere efforts to maintain the quality in our offered range of products in compliance with the set industrial quality norms. We have recruited an efficient team of quality testers that performs strict tests on our offered gamut using latest machines and technology. Further, our chief goal is to fulfill the expectations of our esteemed clients, by offering them a comprehensive assortment of products, as per their specific needs. Our team members work in a close coordinated with our precious clients to understand their various requirements regarding our offered products. Accordingly, they offer suitable products to our clients assuring them of the best quality. In addition to this, we practice an ethical business approach and a very high level of transparency in all our business dealings, in order to maintain good relationship with our clients.

 

Under the guidance of our Director, “Mr. Vishwas V. Jagdale”, we have achieved the epitome of success. His sharp business acumen has supported our professionals to attain utmost client satisfaction.

 

 

Factsheet

Basic Information

Nature of BusinessManufacturer
Additional BusinessSupplier
Company CEOVishwas V. Jagadale
Total Number of Employees11 to 25 People
Year of Establishment2005
Legal Status of FirmLimited Company (Ltd./Pvt.Ltd.)
Annual TurnoverRs. 2 - 5 Crore

Statutory Profile

GST No.27AAECV3557C1ZD
CIN No.U24100PN2012PTC144979

Our Infrastructure

We have constructed a state-of-the-art infrastructural unit that is equipped with latest machinery and advanced technology. Our in-house facility is segregated into different sections like processing, quality testing, packaging, sales & marketing, etc. All these units are maintained as per international industry standards so as to productively produce a world class range of products. Apart from this, we keep upgrading our installed machines in order to make trouble free business operations and enhanced productivity. The manufacturing plant is spread over a vast area and resourced with updated machines and tools.

Mission

Our mission is to protect the metal in the world from destruction by providing environmental friendly, performance oriented specialty coatings at a nominal cost.

Vision

To create a healthy working atmosphere, long term return to the shareholders, save the environment from destruction, provide best products and service at the door steps of customers with efficient planning, production and innovation.

Why Us ?

Our experience and quality products have provided us with considerable insights into the industry. Owing to our ethical and transparent business policies, we have gained the confidence of our clients.

 

Some of the factors that keep us ahead of our competitors are:

 

  • Advanced and innovative technology

  • Optimum clients satisfaction

  • Well equipped manufacturing facility

  • Customized packaging

  • Competitive prices

Good Painting Practice

  1. Open the paint containers carefully, stir the contents very well with hand or mechanical stirrer to give uniform consistency.
  2. If required add recommended Thinner to adjust application viscosity. Consult paint supplier for Thinner and thinning ratio. A wrong Thinner can spoil the paint.
  3. The paint should be filtered/sieved through a suitable mesh/cloth before use.
  4. Clean all containers, implements, spray guns etc.before and after use.
  5. Ensure that the article/the surface to be painted is clean before painting.
  6. Normally Air Assisted Spray requires lower viscosity than Brush application.
  7. Thinned down paint should not be kept for longer periods since it is likely to result in settling of pigments/solids due to gravity.
  8. Correct spray gun and air flow adjustments are necessary to get uniform surface and smooth coating. Adjust distance between spray gun & surface to approximate 10” - 12” to get a proper spray pattern.
  9. Use wide vertical pattern for large surfaces and round pattern for smaller articles.
  10. Stoving paints should be given sufficient flash off time to allow solvent evaporation, as recommended by manufacturer, before stoving/baking to achieve the best results.
  11. On repainting jobs ensure that the previous coatings & loose particles are thoroughly sanded down and removed before fresh painting.
  12. Ensure there is enough ventilation in painting area.
  13. Do not paint in highly humid atmosphere, if possible.
  14. Do not expose eyes & skin to solvent vapors, In case of exposure wash thoroughly with fresh water.
  15. Use safety gadgets like hand-gloves; face/nose masks etc.while painting.
  16. While using two - pack systems:
  • Mix the component exactly as per recommended mixing ratio.
  • Mix only enough quantity that is required for job in hand. Any left-over paint will be wasted since pot life of mixture is limited as specified.
  • Keep the mixture for maturation as specified before use.
  • Clean all implements like brush, spray gun, pot etc. immediately after use since any left over paint will dry hard and make the implements unserviceable.
+ Read More

Safety Precautions

SAFETY PRECAUTION

As it is known, some of the ingredients like solvents, some of the pigments etc. contained in the paint and allied products are potentially hazardous to human health and fire if not handled properly. Though the nature of most of the ingredients have remained unchanged over the years, large production rates of painted articles with modern application methods have increased the exposure of painters and other people in the vicinity and the risk of fire or explosion to a greater extent. But by following some elementary safety and handling precautions the risk can be minimized considerable, if not all together eliminated.

 


FIRE RISK CAN BE ELIMINATED BY OBSERVING THE FOLLOWING :


  1. Provide adequate ventilation in and around work areas by having suitable exhaust system.
  2. Do not keep solvent drums open when not in use.
  3. Avoid all types of naked flames and smoke in work and storage areas.
  4. Clean up spilled Thinners/Solvents immediately.
  5. While pouring solvents into containers slide them by the side of the container; Do not dump or splash.
  6. Ground / Earth all Electrical and Hydraulic Equipments.
  7. Avoid all sparks and static electricity.
  8. All used rags etc. with solvent or oil should be kept in closed containers.
  9. Do not try to extinguish fire with water. Use dry powder or CO2 extinguishers.
  10. Do not direct fire extinguishers against persons. Use fire blankets or water showers.
  11. Do not use Halogen containing solvents or cleaning solvents in spray equipment with aluminum.
HEALTH HAZARDS CAN BE ELIMINATED / MINIMISED THUS :
  • Use proper cloths.
  • Follow directions for use indicated on labels / data sheets.
  • Avoid direct contact of liquid paint and solvents.
  • Use rubber gloves, safety goggles, nose masks, protective creams etc. on exposed body parts like arms, face, neck etc.
  • While painting in confirmed and narrow spaces like tanks, ship holds enclosed rooms etc. adequate ventilation should be provided, apart from proper lighting, helper with like - line, periodic interruption of work etc.
  • Follow strict personal hygiene.
  • Do not eat, drink or smoke while painting.

 

FIRST AID :

  • EYES : In case of any paint or thinner coming into contact with eyes flush with plenty of fresh water repeatedly. Seek medical help.
  • SOLVENT POISONING : If inhalation of solvents results in poisoning, the affected person should be brought into fresh air and kept warm. Call for medical help. If breathing ceases, give artificial respiration.
  • FIRE BURNS : In case of burns, flush immediately with cold, clean water. If clothes catch fire, put the affected person on ground and smother the fire with blankets or wet clothes with plenty of cold water. Do not tear of charred clothes sticking to the body. Call for medical attention in case of large burns.
  • CAUSTIC AND ACID BURNS : Immediately flush with plenty of fresh water. In serious cases call for medical help.
+ Read More
Tell us what you need, and we’ll help you get quotes
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Tell us what you need, and we’ll help you get quotes
terms privacy policy