Specifications:

• 8 nozzles fill simultaneously. Number of nozzles can be increased according to requirement.


• Rapid cleaning, rapid adjustment, step less adjustment of speed for volume cylinder, suitable for filling of different specification and different liquid.


• Only one adjustment necessary for filling quantity, micro-adjustment for each volume cylinder, high precision and good consistency of filling.


• Contact material parts is 316 L stainless steel and silicone rubber, in conformity with GMP standard.


• Filling piston cylinder controlled by step less speed adjustment of imported speed reducing motor, suitable for aqueous liquid and viscous liquid.


• Inertia eliminated by imported electromagnetic clutch and brake, high precision of filling.


• Man machine interface and PLC communication. Only simple setting on screen is necessary for commissioning equipment and changing types.


• Bottle charging, positioning, filling, and bottle discharging are all automatic, if the bottle is not on the right position, the bottle is blocked, or the filling pipe is not inserted into the bottle when filling, the equipment will protect automatically and continue to operate after eliminating the trouble.

Parameter:

• Model: GZX500
• Filling capacity: 90-520ml
• Number of tube: 8 sets


• Speed: 40-55b/min
• Power: 1kW
• Power Supply: 3P 380V
>Air: 3-5kg/cm²
• Size (L x W x H):3,400 x 800 x 1,900mm

Salient Features:

All the parts and assemblies coming in contact with the powder are made of SBDPF-60 and easily removable for mandatory autoclave / sterilization.

Multiple dosing of dry syrup powder or change over of container size and different fill size is possible by just changing the bottle separator or the size of the position respectively.

Total filling unit and conveyor speed is synchronised eliminates the separate setting of each unit.

Slat conveyor belt to prevent jamming of assembly due to spillage of powder.

Special clutch system is provide in the bottle separator for safety purpose.

'No bottle, No-Fill' system eliminates wastage of costly powders.

High volumetric filling accuracy of + 2% of uniform density of dry syrup powders can be ensured by setting the depth of piston in the PORT of the POWDER WHEEL.

The motor is provided with appropriate contractors and relays for the protection against any overload or jamming.

Description: The machine is made of stainless steel. The process is button-controlled. After manual-tube-feeding, 8 tube-position rotates continuously for quantity filling, auto-cut-off, heating sealing and tube ejecting. The whole process are pneumatic-controlled. It is easy to adjust filling quantity and speed. The machine is suitable for various size of plastic tube for filling, sealing and date print. It is featured with perfect sealing, precision quantity and reliable performance.

Optional: Pot Heating System, Against-Trail-Out Filling Head.

Specification:

• Voltage: AC220V
• Filling Capacity: 10-25 tube/min.


• Power: 400w (heating sealing)
• Compressed Air: pressure 0.6-0.7 Mpa


• Air Consumption: <30 dm 3/min
• Filling Quantity: 50ml, 100ml, 200ml


• Filling Speed: 20-30 tube/rain
• Quantity Error: <2%


• Dimension: 1230mm X 700mm X 1400mm
• Weight: 600kg

HP-DOUBLE LOADER
The semi automatic capsule filling machine is designed for precision manufacturing requirements of modern pharmaceutical procedure. Its outstanding features both functional and mechanical provides a high level of automation with precision in filling weight accuracy. It is suitable for filling capsules of all sizes with powder. Granules and pellets.

Oustanding features:
• Automatic clutching of loader when loading ring are full which minimizes operator attention and ensures maximum production.
• A choice of four auger speed with a variable speed of filling table provide flexibility to achieve accurate weight.
• Auto drug hopper in feed mechanism, reduces weight variation and improve productivity.
• Simple structure and low malfunction, easy to maintain and clean.
• Quality and precision manufacturing meets the requirement of CGMP.
• Both, PLC controlled panel or Digital controlled panel, with auto capsule closing system available to meet customers requirement.
• Modified Two-Piece design of drug hopper reduces time for dismantling Auger replacing and powder unloading.

Specifications:

Output: 35,000-40,000 caps/hr.
Loader Drive: 0.5 HP, 380/440 Volts, 3 Fh, 50 cycles.
Auger Drive: 1.5 HP, 380/440 Volts, 3 Ph, 50 cycles.
• Filling Table Drive : 0.5 HP, 380/440 Volts, 3 Ph, 50 cycles.
• Vacuum Drive : 3 HP, 330/440 Volts, 3 Ph, 50 cycles.
Compressed Air: 200 Ltrs,/min. (Scfm) at 100 PSL
Vacuum Drive: 500mm (20") of Hg. at 1000 Ltrs./min. (30cfm).
Dimensions: 2000mm x 900mm x 1600mm.
Approx. Weight: 650 Kgs.

These machines are used for caps arranging, drop automatic, easy operation. Bottles entry in line, continuous capping, high efficiency and quick (capping speed is two or three times as fast as intermittent capping). Frictional capping and rotary bottle conveying, no shake and noise. Stop itself when meeting troubles and no bottles, it is more safety. Applicable to bottles of different specifications with screw.

Parameter:

• Item parameter: Production 50-200 bottles per minute
• Bottle specifications: 30-120mm


• Motor total power: 1,000W
• Voltage: 220V 50-60Hz
• Dimensions: 1800 x 850 x 1850mm
• Weight: 720kg

Suitable for sticker/glue labeling. Can be used for top, side labeling, suitable for flat, oval & round bottles.

Output: 60-300 bottles/min.

Suitable for washing / rinsing the bottles available in 6 / 12 / 24 / 48 / 96 jets stand rotary & stand type models.

Output: 15-150 bottles / min

Suitable for all size capsule, tablet, caplets etc. Available in single/double track. Optional facilities like embossing, scrolling, perforation etc.

Output: 150-300 packs/min

Speciafications

Supply: 230 VAC, 50 HZ.

Feeding System: Vibratory feeder.

Range: 10 gms to 100 gms, 100 gms to 1 kg, 2 kg to 5 kg, 10 kg to 25 kg, 50 kg to 200 kg.

Accuracy with respect to weight range: 1%, 0.5%, 0.25%, 0.1%.

Pan System: Magnetic or pneumatic depending on the weight to be packed.

Contact Parts: SS 304/ SS 316.

Special Features:

• Ideally suited for multi product packing like pulses, dals, wafers, namkeens, seeds, tea, cheese balls, sugar, salt, detergent powders, whole species, tobacco etc.
• A very popular machine in the segment of super markets and namkeens.
• Virtually maintenance free machine.
• User friendly membrane keypad.
• Any unskilled worker can operate the machine.
• Totally hassle free with no change parts with variable grammars and variable material.
• Material of Construction: M S Powder coated / SS

Modern High Precision Machines: Microprocessor controlled load cell based, accurate & consistent filling by weight. Membrane-touch keys for setting parameters for weigh filling and for exact weight.

Output: up to 40 pouches per minute.

User Friendly: Maximum online settings. Easily accessible for print mark and batch coding settings. Fast and easy size change over. All setting made via touch key & interactive message on screen.

Efficient: No Fill - No pouch logic hence no packaging material or product loss.
Perfectly sealed pouches. High outputs with high fill accuracy. Low maintenance.

Load Cell Based Microprocessor Controlled Multi Track Electronic Weigh Filler Pouch Packing Machines:

Model: PP-1000 EWF.
Fill Size: 50 gms to 100 gms.
Pouch Size:
• Width: 75 mm to 250 mm
• Height: 100 mm to 450 mm
Compressed Air: 10 Cu Mtr/Hr @ 5Kg/Sq .cm

Accessories:

• Nitrogen Flushing System
• Gusseting Assembly
• Chain Cutting of Pouch


• Batch Coding Unit

Our Automatic Vacuum Forming machines can manufacture automobile parts accessories like front guards, dashboard, spare wheel cover, car body panel, refrigerator liners, bath tubs, domes, sinks, basins etc. The machine frame is constructed from substantial mild steel sections, which are welded together to from a rigid, flat-based frame requiring no special foundations. Material clamping is by pneumatic lifting frame.

Our machines have sandwich heating with ceramic infrared heaters controlled individually by energy regulators. The mould loading is made easy by front opening & pneumatic cylinders guided by rack & pinion arrangement that drive the mould table. The machine is equipped with pre-blow, plug assist, infrared sensor for sensing the pre-blow bubble height the sack control system to prevent sagging the sheet and from touching the bottom the heater. A temperature control system based on PLC is also available.

All these products are made as per customer requirement.