We are manufacturers, suppliers and exporters of industrial gears manufactured as per customer specifications. The possible production range is almost endless. We can design and manufacture gearboxes to order and package them to integrate with your system - tailor made for your particular requirements.

•Reduction Gear Boxes
We are manufacturers, suppliers and exporters of reduction gear boxes. Our range of reduction gearboxes found their application in various fields. Reduction Gear Boxes can be supplied with following combinations:-
• One or two output shafts
• Foot or flange mounted
• Hollow input for standard IEC motors
• Hollow output for direct shaft mounting

•Shaft Mounted Gear Boxes.
We are manufacturers, suppliers and exporters of shaft mounted gearboxes. These shaft mounted gear units are compact in size, mounting directly onto the driven shaft thus eliminating the use of foundation and coupling. There is no misalignment problem. The gear boxes is suitable for both forward and reverse motion. The torque arm anchors the gear box and provides an easy, quick method of adjustment of V-belts by means of a turnbuckle.

•Worm Reduction Gear Boxes.
We are manufacturers, suppliers and exporters of worm gear boxes. Our range of Worm Gearboxes found their application in various fields.
Applications of Worm Gearboxes includes :-
• For dairy applications.
• For Car wash machines.
• Small units for manual operations.
• For lighting in studios.

•Planetary Gear Box.
Manufacturers, wholesale suppliers and exporters of planetary gears.
Applications of Planetary Gearboxes includes :-
• For Hoist applications, conveyors
• Units with hydraulic drives
• For drum Conveyors
• Geared Motor Drives

•Worm & Gears
We are manufacturers, wholesale suppliers and exporters of worm gears. hardened and ground worm drives are available.

We are one of the leading manufacturer and exporter of industrial storage system like Tool cabinet, Tool Trolley, Machine Shop Cabinet & Trolley for VMC machine tools like Bt-40 Bt-50 Hsk-100 etc., Work station, Tool Crib, Heavy duty Racks, Slotted Angle Rack, M.S. Ballet, etc.

Tool cabinet
• Only one lock controls all drawers, locking system allows only one drawer to be opened at a time to prevent accidental tipping, for increasing safety.
• Secure bottom drawer design ensures drawer will not slide out when closed.
• Safe baffled design ensures drawers will not fall when 100% opened.
• 100% full-extension drawers provide complete access to the furthest corner of the drawers.
• Each drawer can be divided into several compartments.
• Wide aluminum alloy drawer handles with a changeable label for identify the content in the drawers.
• Different drawer's heights and color are available according to your requirements.
• Special surface processing for rust-free use.
• 1mm thickness cold roll steel.
• Loading capacity per drawer: 60-200kg.
• Number of drawers 2+, normal 5+.
• Wheel or castor can be installed.
• OEM is welcome.

FEATURES
• Gland less and seat less Valve, 100% leak proff. Bubble tigh seal is formed.
• NO erosion of piston give “durability”.
• Sealing rings- made in various materials (Including PTFE) to cover virtually every known medium.
• Stay tight during Thermal Expansion
• NO Leakage of toxic/aggressive media Energy / Cost saving.
• Economic & Easy to service, maintenance free.
• Sealing rings easily replaced remaining on line.
• Replacement of rings makes valve new no grinding/lapping require.

SPECIFICATION

Vavle Size In m.m.	End	Material
15,20,25,32,40,50 DIN press rat ND-16, ND-40 Availabe IN 150# &300#	Flanged Ends Flanged End & Drilled to Din2531, to Din 2535 orBS-10, ANSI etc.	C.I, WCB, SS 304, SS 316 Or AS PER YOUR REQ.
65,80,100,125,150 DIN press rat ND-16 Availabe IN 150# & 300#	Flanged Ends	As Above
15,20,25,32,40,50 DIN press rat ND-16 Availabe IN 150# & 300#	Available in. Socketweld or Screwed End to B.S.P. , B.S.P.T. OR N.P.T.	As Above

Availabe with Electric actuator, Gear operated etc. Availabe with jacketed construction. Availabe with Teflon coated piston and Teflon packing rings.
HYDRAULIC TEST

BODY Kg/cm2	SEAT kg/cm2
5	5

PNEUMATIC TEST

CLASS	BODY Kg/cm2	SEAT kg/cm2
ND-10	16	10
ND-25	40	25
ND-40	64	40

SALIENT FEATURES
• Seat Less & Gland Less Valve.
• Field replacable Elastomer sleeve.
• Highly abrasive resistant due to elastomer Sleeve.
• 100 % Leak Tight, Economic & Easy to Service. The sleeve provide the valve lining, flange gaskets, and seating surface all in one.
• Pinch Valves are best suited to handle highly corrosive slurry.When abrasive particles strike Elastomer Surfaces, the impact is absorbed and then deflected back  into the particle; This resiliency allows elastomer surfaces to wear at a much slower rate  than metals or even ceramic surfaces.  No need of expensive metal body because the sleeve is only wetted part.

SPECIFICATION

Vavle Size In m.m.	End	A Material
15,20,25,32,40,50,65,80,100,125, 150,200,250,300 DIN press rat ND-16, ND-40 Availabe IN 150# & 300#	Flanged Ends Flanged End & Drilled to Din,ANSI, BS, 10 , IS.	C.I, ALLUMINIUM or As per your requirement.

Availabe with cam actuator , Electric actuator, Gear operated, Pneumatic Cylinder Operated etc.

SLEEVE MATERIAL.

Natural rubber antiabrasive, natural rubber food quality, Nitrile,EPDM, Silicone, Neoprene, Hypalon.

OTHER INDUSTRIAL VALVE.
• Gate Valve
• Globe Valve
• Ball Valve
• Check Valve
• Butterfly Valve
• Diaphragm Valve
• Flush Bottom Valve
• Sewing check valve
• Forged steel Valve
Industrial valves are available in SS 316, 304, WCB, Forge Steel and Bronze material.

SALIENT FEATURES
• Rubberlined Pumps are very good acid handling pumps.
• These are less expensive than more exotic Stainless Steel & High Alloy Pumps for identical service conditions.
• Interchangeability of parts permits quick servicing of damaged parts in chemical plants & result in minimum spare part inventory.
• Simple external axial adjustment for IMPELLER adjustment.
• Standard dimensions cut layout design cost.
• Standard foundations save installation, drawing time, talent & money.

Lining Material:
Hard Ebonite (Natural Rubber). Other lining like Neoprene, Butyl, Hypalon, etc. on request.

Drive:
Rubberlined Pumps can be arranged for a V-belt drive or direct coupled from a motor mounted on a common base frame.

RUBBER LINE PUMP USED FOR FOLLOWING OPERATION

Con. HCI transfer. Dilute H2SO4 Water Treatment Effluent Treatment.

Filter Press for Dyes. Lime Pump in CPW Plant Staple Fibre Plant (Bleach Liquor) Soft to Hard slurrier upto 3 mm size.

RUBBER LINE PUMP SERVES FOLLOWING INDUSTRIES

Chemical Industries Dyes & Intermediates Industries Paper & Pulp Industries

Fertilizer Industries Mines Petrochemical Industries Textile Industries Sugar Industries

TECHNICAL SPECIFICATION

Capacity :	Upto 100 m3/hr
Head :	Upto 40 mtr
Speed :	940 / 1450 /1810 / 2200
Temperature :	Upto 80° C