We present a gamut of digital counter which is available in various specifications. Digital counter is an instrument which, in its simplest form, provides an output that corresponds to the number of pulses applied to its input. Digital counters operate in the binary number system, since binary is easily implemented with electronic circuitry. Binary allows any integer (whole number) to be represented as a series of binary digits, or bits, where each bit is either a 0 or 1 (off or on, low or high, and so forth).

Common Specifications

• Power Supply: 220 VAC ± 10%. Other voltages available on request.
• Measurement Accuracy: ±1 Digit
• Relay Output: NC-C-NO Potential Free
• Contacts 5 Amps at 220 VAC
• Memory Backup: Provided for all models
• EEprom memory: for 10 years
• Data Entry or all the selections: Through Front Panel Switch
• Reset 1: From Front Panel Switch
• Reset 2: Through Terminal Strip at back

Inputs

• Voltage Pulse: 3-24 volts DC from IR Photo switches, Promixity switches, Encoder, SSSR etc
• Potential free contacts from Limit Switches, Micro switches, Relay Contacts, any other aux contacts
• Supply for Sensor: Counter provides 12 V DC, 30mA supply for the sensors

All the facilities are user selectable

FHP permanent magnet DC motors or stepper motor in ratings of 12 V DC / 24 V DC, 18 W, 60 W and 120 W. We also offers AC induction shaded pole and capacitor run motors from 10 W to 150 W and stepper motors in the torque range of 0.5 kg-cm to 20 kg-cm.

Manufacture of motors in other ratings is undertaken for large quantities.

We provide a gamut of DC motors that mainly converts the electrical power into mechanical work. These DC motors are accomplished by forcing current through a coil and producing a magnetic field that spins the motor. Our gamut of DC motor is extensively used in various industries.

Following are the salient attributes of DC Motors:

• High MTBF because of large derating and use of low loss active components.
• Low ESR grade 105 deg. Centigrade capacitors used.
• Use of current control technology gives fast transient response and wide bandwidth.
• Identical power supplies can be directly parallel hence redundant systems solutions can be offered. (Feature available in models of higher rating only)
• Rugged double state I/P filter offers high noise immunity, a must for harsh industrial environment.
• Features as thermal shutdown, over voltage protection and operation from 3 phase 440 VAC can also be provided additionally.

We offer an array of AC, DC drives soft starters that consist of micro processor based variable frequency. AC Drives Highly reliable power module uses IGBT & high power transistors Automatic IR drop compensation

• Low harmonic distortion
• Overload protection
• DC Injection braking
• Soft Start: On line/Off line

Our range of DC relays are widely used in process control instruments and telecommunications. These electro magnetic DC relays, PCB mounting and IC socekt mounting type with coil voltage 5 to 48 V DC and contact rating 1 Amp to 10 Amps

Technical Specification:

• P1 RELAY 5A CONTACT ANY COIL VOLTAGE
• 1 C/O 43
• P1 RELAY 5A CONTACT ANY COIL VOLTAGE
• 2 C/O 48
• P1 RELAY 10A CONTACT ANY COIL
• VOLTAGE 80
• PX-2 RELAY 155
• P4 (6V, 12V, 24V) 1 C/O 42
• DS 4E (5V, 12V, 24V, 48V) 295
• 12V MATSUSHITA 140