Vinod Cement Company

• Cold application. Available in two pack system, just mix both parts homogeneously and fill in the joint.
• Easy to apply with over all less labour cost.
• High bonding strength.
• Low density as 1.95 gm/c.c. as compared to Lead 11.35 gm/c.c., so 1.95/11.35=1/5.82, nearly 1/6th consumption and the resultant cost is very much economical.
• Low transportation cost.
• No heating, no pollution, so it is environment friendly.
• Chemical resistance.

It is an Epoxy based formulation specially designed for bonding old concrete and new concrete/ plaster providing monolithic surface. Normally cement slurry is used in such conditions, which does not perform to the satisfaction and shrinkage crack is developed at the junction of old concrete and new concrete. This crack becomes the source of leakage. DRIPSEAL-BA-34 has excellent bonding with almost all types of construction material, so hacking or chipping of old surface is not desired. DRIPSEAL-BA-34 is available in liquid form and two pack system. Both parts are to be mixed and applied on old concrete. Fresh concrete/plaster is laid when the coating is little touch dry.

• Increases workability.
• Reduces water cement ratio from 10% to 15%.
• Reduces capillaries making the structure waterproof.
• Makes the cement mixture more dense.
• Reduces shrinkage cracks.
• Extends life of paint.
• Provides protection to reinforcement against corrosion. (Corrosion causes development of serious cracks in R.C.C. structure)
• Increases bonding strength and save rebounce wastage of cement during plastering especially in ceiling.
• Resistance to freeze thaw.
• Better chemical resistance than ordinary cement flooring.

• It is available in two packs, which are to be mixed together before application.
• It is non toxic after setting.
• High bonding strength.
• High chemical resistance.
• Long term effectiveness.

• It is available in two packs. Both parts are available as non flowable paste.
• Remains flexible after setting.
• Non shrinkable after setting.
• Excellent bonding to various surfaces such as bricks, asbestos, glass, wood, stone, metal, plaster, concrete etc.
• Resistance to mild chemicals and solvent.
• It can be over painted conveniently, due to its light shade.
• Cold application, so easy to apply.
• Effective for nearly 10 years.

DRIPSEAL-PC-70 is a unique product. It is polymers based compound. It is a single pack system and ready to use. It is really do it yourself product. Cement is to be mixed in equal quantity by volume. It also penetrates into the structure. It is one of the economical and durable products available. Since it is ready to use, so there is no wastage and no wastage of brushes also.

• Low labour cost.
• Easy to apply.
• Effective for more than five years.

DRIPSEAL-RP-66 is cement plasticiser with slight initial set retarding effect. To increase the workability, use of excessive water in concrete is normal practice. Excessive water causes higher shrinkage cracks. So the use of DRIPSEAL-RP-66 is recommended as it reduces water cement ratio upto 20% and increase the workability, which ultimately reduces shrinkage crack.

• It is polymer based and available in two pack system.
• Excellent bonding strength to almost all surfaces such as concrete, plaster, bricks, asbestos, wood, stone, metals etc.
• Being a lightweight system, it does not add to the weight of structure like tar felt and cement based waterproofing materials.
• It is fire retardant, so it does not help fire like tar felt.
• Completely jointless system, irrespective of area of structure.
• Resistance to acidic rain as well other mild chemicals.
• Due to off white color, low heat absorption as compared to black/brown colored treatments.
• It is resistance to ultra-violet rays.
• Coating is not effected even if water remains stagnant (tar felt and water based polymers are not effective for such site conditions).
• Its coating remains flexible, so it is suitable to cover hairline cracks.
• Cured film is flexible but abrasion resistance to normal use. However dumping of store materials over the coated roof should always be avoided.
• Effective for negative pressure like basement.
• It can be reinforced with fiber, if desired.
• It prevents fungal and vegetable growth.
• Effective for ten years on exposed surface.

• It has excellent bonding with almost all types of construction material such as concrete, plaster, bricks, wood, asbestos, stone, metal etc.
• Excellent chemical resistance.
• Completely jointless system irrespective of area of structure.
• Fire retardant.
• Unlike other such products, it contains no solvent and recommended even for confined space.
• It does not add to the weight of structure like tar felt and cement based products.

• Protect the surface from growth of black fungus.
• It forms clear, invisible film so it does not effect the appearance of structure, whether it is applied on cement based colored paint or on natural surface, the appearance of structure remains as it is.
• Control the efflorescence.
• Prevent flaking of interior paint.
• Extend the life and beauty of cement based paint coatings.
• Easy to apply, no skilled worker is required.
• It stops the water absorption, so the dirt does not find the way to enter the structure and remains un sticked on the surface, which is washed away with rain, leaving behind the clean surface.
• It does not effect the breathing property of the structure, allowing the internal dampness to evaporate.
• Effective for more than five years.