Vintech Aircontrol Engineers & Consultants

We are offering Pulse Jet Bag Filters:

- We designed for collection of dry and fine dust up to 0.5 μ, for continuous operation and fully automatic cleaning system with Compressed Air and Sequential Timer.

- Sizes designed for 1000 M3/Hour to 100000 M3/Hour as a Single Unit or Multiple Unit.

- Operating Temperature up to 200oC with special material of bag,

- High cleaning efficiency
- Compact design
- Easy maintenance

** Accessories:
- Rotary Air Lock with Geared Motor, Support Structural, Platform and Ladder etc.

We are offering Plug Fans:

- Recommended:
Exclusively for Oven & Dryer Air Circulation, with Wheel inside the Chamber & drive package outside with Insulation arrangement up to 200 MM with temp. ranging upto 300 C

> Direct Drive
> Direct through Flexible coupling
> V Belt Drive
These are the three general arrangement to suit operating conditions and temperature.

Single Unit upto a flow of 20,000 CMH & Multiple units for increased flow.

We are offering Combustion Fans:

- Generally High Pressure Centrifugal type is designed for comparatively small air volume with high efficiency.
Pressure range upto 1200 mm WG in Single Stage and 1500 mm WG in Multi Stage design with maximum power of 150 KW.
Widely used for Combustion application pressure ranging from 700 mm WG to 1000 mm WG.

- Range starts from 0.37 KW to 150 KW drive Motor.
Open wheel design is ideally suited for chips and dust conveying.

- Different Orientation and different arrangements to suit specific requirement and application.

We are offering Dust Collection System:

- This system removes dust from a stream of exhaust / gas by using fabric as a filter media and cleaning method is by using compressed air.

- The total process of cleaning automatic by Sequential Timer.
Various sizes, media etc are available to meet specific requirements.

We are offering Cyclone Collectors:

- Model Cyclones are designed for Collection of granular or coarse particles from air or gas. The dust should be dry and should not be sticky or adhesive. Recommended up to 350C operating temperature, sizes ranges from 1000 M3/Hour to 20,000 M3/Hour as single units and multiple units in parallel for higher capacity.

- MOC - MS, SS, PP/FRP
- Accessories - Rotary Air Lock with
- Geared Motor,
- Support Structure,
- Collection Bin etc.

Offering Venturi Scrubbers.

* One of the most effective Wet Scrubber for collection of dust or dust with gases to meet any level of emission requirements. Ideally suited for high volume up to 100000 M3/ Hour and gases with temperature like,

- Power Boilers
- Incinerators.
- Lime Kiln
- Foundry
- Steel Melting Plants etc

* MOC: M.S., SS, MS/ FRP Lined.

We are offering Radial Fans:

- Wide Range of Fans in Low Pressure, Medium Pressure and High Pressure classifications.

** Arrangements in:
- Direct drive on the motor shaft,
- Drive through V Belt & Pulleys &
- Drive through Flexible Coupling.

** Based on the operating conditions.

- Most of the applications are SISW type and DIDW are used for high volume and low pressure applications like Ventilation, Air Conditioning etc.

** Our ranges:
- SISW Low Pressure 100 CMH To 100000 CMH
- SISW Medium Pressure 2000 CMH To 200000 CMH
- SISW High Pressure 2000 CMH To 100000 CMH
- DIDW Low Pressure 7500 CMH To 200000 CMH

- Based on the application and operational conditions fans are designed with

- Backward curved
- Backward Curved Radial tipped
- Straight Blade & Open wheel
- Paddle Wheel
- Limit load backward curved etc.

- Material of construction to suit varied applications and operating conditions, like MS, SS , Aluminum, MS lined with FRP, MS Rubberlined etc.

- Basically 4 different orientations in clockwise and 4 in Anticlockwise and other orientation as per request to suit site conditions.

- High temperature designed with SS 310 and 317 L for corrosion resistant on specific requirements.

We are offering Unit Dust Collector:

- Compact unit designed exclusively for low volume of Exhaust to collect fine dust particles with drives integral, ranging from 500 M?/hour to 2000 M?/hour with manual cleaning and automatic bag cleaning with compressed air. Unit is with the option of portable model on request.

- This is mainly used for pharma application for lower volume & horsepower.

- Both shaker type and pulse jet in the range of selection.

We are offering industrial fans & blowers of best quality like as follows:

a. Boiler fan: are custom built and blades are hard faced to withstand erosion

b. Pressure axial flow fans: are suitable for fan handling appliances with clean, dusty or humid air and fumes

c. Centrifugal fan with guide vane: used for precise control of flow and pressure

d. Centrifugal fan: used for ventilation, pressurization, drying applications etc.

e. Combustion blower: used for high pressure air for burners, furnaces, ovens etc.

We are offering Multiclones:

- Models are designed for cleaning flue gas by overcoming the constraints of space, temperature, abrasion etc.

- Large number of small cyclones out of Casting are enclosed in steel Cabinet with suitably designed inlet / outlet / dust discharge. Sizes ranges from 3000 M3/Hour to 50,000 M3/Hour.

- Accessories: Support Structure and Rotary Air Lock with Geared Motor.

MANCOOLER

600 MM DIA WITH 1HP KEC MOTOR - RS.16500/-
PACKING AND FORWARDING EXTRA
PAYMENT 100% AGAINST PROFORMA INVOICE

# Generally High Pressure Centrifugal type is designed for comparatively small air volume with high efficiency.

# Pressure range upto 1200 mm WG in Single Stage and 1500 mm WG in Multi Stage design with maximum power of 150 KW.

# Widely used for Combustion application pressure ranging from 700 mm WG to 1000 mm WG.

Offering High Pressure Fans.

- Generally High Pressure Centrifugal type is designed for comparatively small air volume with high efficiency.

- Pressure range upto 1200 mm WG in Single Stage and 1500 mm WG in Multi Stage design with maximum power of 150 KW.

- Widely used for Combustion application pressure ranging from 700 mm WG to 1000 mm WG.

- Range starts from 0.37 KW to 150 KW drive Motor.
Open wheel design is ideally suited for chips and dust conveying.

- Different Orientation and different arrangements to suit specific requirement and application.

We are offering Axial Flow Fans:

- High volume and low pressure application with high efficiency, low cost for supply or exhaust applications, the size ranges from 300 mm φ to 1600 mm φ with a capacity up to 100000 CMH with different material of construction of Blades, to suit different applications, like

- Aluminium
- GRP
- Polypropelene and
- Stainless Steel

- Fixed di cast or moulded blade design and variable pitch bladed design.

- Direct drive, V-Belt drive, Bifurcated type Roof Extractor type for high rise concrete roof like power pl ants etc as Power Ventilators.

We are offering Centrifugal Fans:

- Wide Range of Fans in Low Pressure, Medium Pressure and High Pressure classifications.

** Arrangements in:
- Direct drive on the motor shaft,
- Drive through V Belt & Pulleys &
- Drive through Flexible Coupling.

** Based on the operating conditions.

- Most of the applications are SISW type and DIDW are used for high volume and low pressure applications like Ventilation, Air Conditioning etc.

** Our ranges:
- SISW Low Pressure 100 CMH To 100000 CMH
- SISW Medium Pressure 2000 CMH To 200000 CMH
- SISW High Pressure 2000 CMH To 100000 CMH
- DIDW Low Pressure 7500 CMH To 200000 CMH

- Based on the application and operational conditions fans are designed with

** Backward curved
- Backward Curved Radial tipped
- Straight Blade & Open wheel
- Paddle Wheel
- Limit load backward curved etc.

- Material of construction to suit varied applications and operating conditions, like MS, SS , Aluminum, MS lined with FRP, MS Rubber lined etc.

- Basically 4 different orientations in clockwise and 4 in Anticlockwise and other orientation as per request to suit site conditions.

- High temperature designed with SS 310 and 317 L for corrosion resistant on specific requirements.

We are offering Packed Column Scrubber:

- The Counter current design is highly used to absorbed and scrub acid mist, odors,and widely used for Plating, Picking, Chemical processing and control or emission of contaminant like HCL,So2, HNo3, H2S etc.

- MOC : MS/FRP Lined, SS,PP/FRP Lined AND FRP Moulded
- Features : Low Pressure drop , Low cost, Higher collection Efficiency , No Moving parts.

We offer air scrubbers, industrial scrubbers, industrial scrubbing equipment, wet scrubbers, dust collection systems and industrial impellers. Also offers boiler fans and centrifugal fans.

We undertake and execute the following Systems from concept to Commissioning:

- Ventilation and Pressurization Systems
- Dust Collection Systems
- Gas Cleaning and Scrubbing Systems.

We offer centrifugal blower with following features,

A typical inlet guide vane is illustrated here, where precise control of flow and pressure is anticipated.
Power adding is a added advantage.
Flow upto 1,00,000 CMH and motor power upto 100 HP.

We are offering Boiler Fans:

- ID, FD & PA FANS:
- Specialized in Boiler Fans for the last 20 years and supplied to most of the Boiler manufacturers throughout the country.

- The satisfactory function and performance of a Boiler totally depends upon the Boiler Fan ID, FD and PA for FBC type.

- Various design, type and models to suit customer requirement from 1t to 25t capacity.

- ID FAN:
- Centrifugal / Radial Fan generally, belt-drive or direct through Flexible Coupling with heavy duty Impellers with or without hard facing or with liner plates etc depending upon the fuel handled, erosion and corrosion etc.

- Preferred speed up to 1500 and operating temperature up to 280 C in M.S.Construction, EN-8 Shaft, Roller Bearings, Taper lock Pulleys, Wedge Belts etc for Belt Drive and Tyre Coupling or Special Couplings for Coupling Drive, with heat slinger and heat resistant Aluminium paint, as standard features.

- FD FAN:
- Centrifugal / Radial Fan with direct drive arrangement in general and flexible coupling drive for higher duty condition at 1420 RPM or 2850 RPM depends upon technical specification. Generally selected for ambient air handling up to 40C.

- PA FAN:
- Centrifugal / Radial Fan generally used for FBC Boilers, operating approximately at 150?C with direct drive through Flexible Coupling. Invariably low volume and high pressure ranges up to 1100 MM WG maximum with drives 1420 or 2850 through coupling drive.

- Optional accessories include,
- Variable Inlet Guidevane
- Outlet Damper
- Inlet / Outlet Bellows to suit customer design.