Standard Three Phase 0.125 HP to (0.09 KW to 15 KW), frame size 56 to 160 L in 2, 4, 6, and 8 Pole design. Single Phase Motors 0.25 H.P. to 3 H.P.
Motors have IP-44 protection as defined in IS: 4691. Motors can be supplied with IP-54 and IP-55 on request which provides protection against damaging ingress of dirt and harmful effects of water jet.
Standard motors with single shaft extension are horizontal foot mounted (B3 as per IS: 2253)
INSULATION SYSTEM AND WINDING PROTECTION :
Motor are provided with class “B” insulation system, class “F” can be supplied on request PTC thermistors in the Stator winding can be supplied on request on request.
PRESSURE DIE-CAST ROTORS :
All rotors are of high pressure aluminum die-cast to ensure improved reliability due to elimination of joint that exist in a brazed rotor. Each rotor is dynamically balanced along with the fan on electronic machine to ensure very low amplitudes of vibration and noise level.
TERMINAL BOX :
Standard location of the M.S. terminal box with two cable conduct entries is on the side of the housing.
NOISE LEVEL AND VIBRATION :
Motors are designed for low noise level. Dynamically balanced rotors having perfect alignment and a fine control on the uniformity of air gap minimise the vibration. Pulley, Bearing seats and air gap surfaces are grinding resulting in vibration free running.
BEARING SYSTEM :
Bearings are anti-friction ball and roller bearings. Regreasing can be provided on request. The grease used and recommended is Lithium based with drop point greater than 160o
EARTHING TERMINALS :
All motors have three earthing terminals. One in the terminal box and one on each foot.
COOLING AND VENTILATION :
Type of cooling is as per IS: 6362. Efficient heat dissipation is effected by guided air flow through motor from rib with help of an external fan. Rotors fins create turbulence within inside air thereby prevent hot spot in overhangs.
LIFTING HOOKS :
Suitably located hooks of adequate strength are provided to lift the motor bodily for the purpose of installation, alignment, repairs and overhauling etc.
All standard motors are painted with semi-glossy synthetic enamel paint. However special paint is available on request.
Unbalance vibratory motor with special tough design is used as drive for the vibrating machines. The applications are feeding, screening, discharging etc. The vibration motors are available in 2800, 1440, 960 and 750 RPM. The special features includes sturdy frame with stiffing ribs, Body fabricated with high grade ductile iron, Extra large dia. Of shaft to resist bending under high centrifugal force, Fitted with heavy duty cylindrical roller bearings, specially varnished winding with terminal box to withstand tough operating conditions, Specially designed electrical parameters for cool operation conditions. Vibration motors are available from 0.25 HP to 7.5 HP in foot mounted design or flange mounted type. Vibration motors are widely used in process plants, Glass, Food, Metal, Coal power plant, Chemical, Ceramic, Foundries, Packaging Industries etc.
Unbalance motors are a synchronous AC Motors with pairs of centrifugal weights fitted to the ends of the motor shafts. The size of the unbalance and with it the amplitude of the oscillation by the working unit can be adjusted by shifting the centrifugal weights when the motor is at a standstill. The unbalance motors are also available in a special version for mains voltages up to 440V and for a mains frequency ranging from 50 Hz to 60 Hz.
Salient Features :
Sturdy & robust construction.
Totally enclosed dirt & dust proof construction.
Amplitude of vibration can be controlled.
Heavy duty bearings for long & trouble free operation.
Low noise as compared to Electromagnetic Vibrators.
Centrifugal force can be adjusted from zero to maximum.
Low maintenance due to absence of belts, pulleys, chains sprockets etc.
motor winding are specially insulated and impregnated with high grade insulating varnish to withstand humid moist and tropical climate.
dynamically balanced rotor minimise vibrations and smooth running.
each machine provided on bench grinders with end caves, which may be easily may be easily removed for fitting of grinding wheels. They give perfect protection to the worker with full freedom of operations. Adjustable tool rests are provided to ensure maximum usage of give proper level to the grinding component.
the wheel guards are provided on bench grinders with end caves, which may be easily removed for fitting of grinding wheels. They give perfect protection to the worker with full freedom of operations. Adjustable tool rests are provided to ensure maximum usage of grinding wheels. Tool rests are machined to give proper level to the grinding component.
construction of the machines are made sturdy and robust to offer vibration free performance.
confirms to is 2538 standard
use of high quality grease for lubrication; recommended lithon 3 of hp or equivalent.
all machines are subject to rigid qality control tests.
machines of different voltage and different frequency can be supplied against specific orders.
one year warranty against any manufacturing defect.
bench grinders up to 1 h. P. Rating are supplied without eye shiels. The same can be supplied at extra cost.
"Windy” pedestal man cooler fans are mainly used in hot areas of the industry or work unit. they are basically used as man cooler.. it comes with sturdy shell housing & both sides protected grills, with inlet cone for better entry for air, with aluminum impeller dynamically balance, incorporate with manually oscillating arrangement. they are available in different sizes and models.
our ranges of needle vibrator (electric) are easy to transport and are steel cage designed for rough site handling. These are oil filled rotors and spring mounted with 360-degree rotation. These are double oil seal protected.