Needle Valves are extensively used to regulate the flow of liquids or gases at precise flow rates and come in various styles, qualities and forms like screwed and flanged form. Needle valves are widely used in various industries for many applications but especially where there is a need to regulate the flow of liquids or gases at low rates in order to block solids that come in the way or otherwise to make necessary adjustments in the flow as per the need. In short, these small valves are used where very precise flow regulation is required or to minimize the effects of fluctuations, as it is a flow control device.

Designed for application on instrument lines, Gas sampling lines, Pneumatic Systems, Pilot Plants, Analyser Labs etc.
These valves perform on ON / OFF functions.

TYPE: 2 way, 3 way, 4 way, 5 way, 1 piece, 2 piece, 3 piece design. Quarter turn, Half turn, Full turn i.e. L Port 900, T Port (full turn)

MOC : Stainless Steel of all types, Carbon Steel, Mild Steel, Brass. CONNECTION: 1/8" to 1".

PATTERN : Screwed type, socketweld type, Buttweld type & Flanged end, tube 00 connection i.e thread connection BSP, NPT & as per ASA & BS specification.

PRESSURE RATING: 0 to 2000 psi hydraulically & 0 to 300 psi pneumatically.

Ball and Needle Type Globe Valves.
• One-piece forged body having compact design with strength and reduced potential leak paths compared to conventional designs.
• Flanged connections are available in inlet and outlet in a choice of sizes and ratings to suit each application.
• Primary isolation ball valves are precision machined and super finished for high performance pressure and temperature ratings.
• Heavy duty needle type globe valveis designed to ensuring bubble-tight shut-off on venting or isolation service.
• Bolt-on outlet option allows choice of connections for dual instrument mounting, welded connections and chemical injection.

"Virgin" manufactures a reliable high pressure check valve for free flow in one direction only with minimum pressure drop and provides soft seating arrangement without any force on the soft BUNA "N" or VITON seal results in zero leakage at back pressure & long life, available with screwed & pipe / tube ends.

Cracking pressure: 0.30 to 0.50 kg/cm2 standard special cracking pressure available

Test pressure: Body: 620 kg/cm2
Seat : 413 kg/cm2

Pneumatic : Seat 60 kg/cm2

Seal : BUNA "N", VITON

Material:A105,SS304,SS316,Monel,Hastelloy.

Finish: CS zinc plated & dichromated, SS natural.

"VIRGIN" makes Manifold Valves which are installed to measure, control, isolate, equalise, calibrate, drain, vent or differentiate the pressure of liquids & gases. We offer 2,3,5 valve manifold configuring remote mounting (pipe to pipe), direct mounting (pipe to flange T type & flange to flange H type) or panel mounting on to gauges, pressure switches or DP transmitters having 54 mm centre .

Needle Type Globe Valves

• One-piece ultra-slimline forged bodycombines a compact design with strength and reduced potential leak paths compared to conventional designs.
• Outside screw and yoke (OS&Y) needle type globe valve with yoke and bolted bonnet provide high mechanical strength and long cycle life on primary isolation service.
• Flanged connections available on inlet and outlet in a choice of sizes and ratings to suit each particular application.
• Heavy duty needle type globe valve designed to ensuring bubble-tight shut-off on isolation and vent service.
• Gauge adaptors allow flexible positioning of gauges and instruments with a choice of designs available.

“Virgin” makes single and double compression tubes fittings which are designed / manufactured for process and instrumentation tubing which provides a leak proof torque free seal at all the tubing connections. Thus it eliminates hazardous and costly leaks.

MOC : Stainless Steel of all grades, Carbons Steel Brass, Monel, Hastalloy, Teflon, Tube O.D : 1/16” to 1” (3 mm to 25.4 mm)

End Connection : 1/16” to 1” (NPT, BSP, NSPT Socket weld & Plain End) Working Pressure – 2000 to 6000 psi.

Virgin manufactures comprehensive range of high pressure pipe fittings for process Control, Instrumentation, Hydraulic & Pneumatic application. MOC- Forged Carbon Steel / Stainless Steel / Alloy Steel, Brass Forged / Bar Stock.
Size – 1/8” to 2”

Threads: BSP, BSPT, NPT, UBE, OD, PIPE NB, Socket weld & Screwed (Male , Female)
Pressure Rating – 2000-9000 psi.

Water seal pots are built in customized design & in accordance with ASME codes. These pots are used primarily to collect dirt & moisture which might impair the performance of instruments.

MOC: CS, SS & Alloy Steel for Shell and end cap.

Made as per customers' requirements, these air headers/distribution manifolds are equipped with “Virgin” make Needle /Ball valve and prime quality materials. These can easily be mounted on wall or on pipe stand & available upto 2 x 10 outlets with equal spacing & positioned to meet specific requirements.

MOC: Stainless Steel of all types, Carbon Steel, Alloy Steel.

Testing : 200 psi pneumatically, 100 psi hydraulically.

A wide range of Thermowells for almost all temperature sensing requirement in high & low temperature, high pressure, high velocity.
Available in - standard type & customised configuration, Bar Stock Drilled / Fabricated, Flanged, Screwed, weld on weld type.
Type : Straight, Taper [Vertical]

MOC : Brass, C.S., S.S. 304/ 316, Alloy Steel. Connection - Screwed [BSP / NPT) S/W, Flange. Finnishing - Mirror Finish with high precision work & strict with quality super vision.

Syphon:
Design for high temperature & high pressure steam application manufactured from seamless. CS, SS 304 /316 pipe.
Size -1 /4" to 1 " pipe, sch 40, 80,160 & XXS
End Connection - S/W, Screwed, NPT, BSP, Male/
Female, Swivel type.

Snubber:
MOC - Brass, C.S. & S.S.
Finish - Blackend for MS, Natural for Brass & Stainless Steel. Pressure Rating - Upto 3000 psi.