Item Code: Vistol-Neat-945-945A
Vistol Neat 945/945A are active type neat cutting oils and give better surface finish and longer cutting tool life over a wide range to operating temperatures. These oils are recommended for machining operations of high tensile stainless steel as well as nickel-chromium alloys on automats, gear cutting, hobbing, drilling/reaming and thread cutting machines. It is not recommended for use on non-ferrous metals. Vistol Neat 9451 contains high dosage of sulphurised fat for improved surface finish and tool life.
Item Code: Vistol-Neat-Flute
Vistol Neat Flute is special purpose non-staining type neat cutting oil having very high oiliness property due to the presence of fatty material. The oil has excellent foam release ability and its use prevents overheating of work piece, thus eliminating chances of metal distortion. Vistol Neat Flute is recommended for flute grinding of drills, reamers and various types of grinding tools which involve severe metal grinding processes. The oil is also suitable for gear cutting, hobbing and high speed metal working operations. Vistol Neat Flute can be used on both ferrous and non-ferrous metals.
Item Code: Bestlub-Coolcut
Bestlub Coolcut is a mineral oil based soluble cutting oil. The emulsifier used in this oil is rosin soap with natural sulphonate system. Further the oils are fortified with corrosion inhibitors and biocides. The selection of emulsifier is so made as to enhance the performance in extreme applications as well as in mild application. The additive emulsifier is also proved effective in dilution with even hard water. Vistol Coolcut forms a milky emulsion with water and contains rust inhibitor to impart anti-rust, anti-corrosion properties and biocide to prevent bacterial growth in the emulsion. This oil has superior cooling and lubricating properties which impart excellent surface finish and minimizes tool wear. It is used in concentration of 5% and for grinding, more dilute emulsions are recommended. For stable emulsion oil should be added to water. It meets BIS: 1115 1986 specification and is recommended for a variety of cutting operations on ferrous and non-ferrous metals.
Application: Bestlub Coolcut oils are recommended up to a max of 5% or 1:20 usage for extreme conditions. While in mild usages, a percentage of 2%or 1: 50 also gave satisfactory results. Hence it is recommended that the user find an adequate proportion based on the performance and intensity of the application.
Performance: Bestlub Coolcut Oil meets IS-1115–1987 specifications and are cost-effective soluble cutting oil. The emulsion test at 5:1 and 20:1 in water with CaCO3 hardness not less than 400 ppm showed no oil or cream traces. It also showed better performance on the froth test with a no froth using water of 200-ppm hardness. This oil also showed excellent results on cast iron and copper corrosion tests.
Viscosity CST @ 40oC
Flash (Min) oC
< 50 PPM
Item Code: Vistol-Coolcut-FP-NS
Vistol Coolcut FP NS is a superior quality soluble type metal working fluid which forms stable milky white emulsion and provides longer emulsion life. It gives excellent surface finish and extended tool life. It meets superior performance level of IS: 1115-1986. The most common emulsion strength used for machining ranges from 5 to 10 percent depending on the severity of machining.
Item Code: Vistol-Neat-253
Vistol Neat 253 is blended from low viscosity high VI base oils. It provides extra cutting assistance tinder contagious long work-cycles. It has minimum mist forming tendency when used in high pressure coolant fed systems. The use of the product optimizes filter life due to its low sludging tendency at operating temperatures. It is recommended for deep hole boring, deep hole drilling including gun drilling and trepanning operations where pressurized coolant system is employed for swarf removal and effective cooling at the cutting point. It also provides satisfactory performance in deep hole boring of stainless steel. It is not recommended for use on non-ferrous metals.
Item Code: Vistol-Neat-335-345
Vistol Neat 335/345 contains additives which provide anti-weld, oiliness and EP properties to these oils. The presence of chlorine enables the use of these oils for extreme pressure. Low or moderate temperature cutting operations where feed rates are high but speeds are low. It provides excellent performance in all machining operations on non-ferrous metals and also is used for gear hobbing, gear shaving, screw cutting, tapping, milling, reaming, etc and they do not discolor the components.
Item Code: Vistol-Neat-353
Vistol Neat 353 is sulphur-chlorinated type cutting oil with excellent cooling and ant-weld characteristics which helps in machining of intricate shapes with high precision. It is a low viscosity product designed specially for arduous operations such as deep hole drilling and deep hole boring where pressurized deliver of the cutting fluid is required to clear fine swarf effectively. It is suitable for cutting of ferrous and ferrous alloys only. It is also suitable for certain honing operations.
Item Code: Vistol-Neat-355
Vistol Neat 355 is a product of high EP activity containing special additives. It is developed for severe metal cutting operations including gear cutting, broaching and threading of alloy and stainless steel. This provides a lubricating film which resists cutting stresses and gives very good surface finish and long cutting tool life. It meets IS: 3065-1985 type 3 cold grades II and is recommended for ferrous metals.
Item Code: Vistolsteerol-C6
Vistolsteerol C 6 is a premium quality Oil-in-Water type emulsifiable fluid, recommended for cord rolling of mild steels and medium carbon steels. It is having very high emulsion stability and has excellent cooling and friction reducing properties. Its emulsion given longer roll life, reduced power consumption and stain free surface finish. Due to its higher emulsion stability, specific oil consumption is much lower compared to other rolling oils. Due to its proper composition with natural fats, emulsion shows excellent “Plate out” characteristic to ensure roll and strip cooling. It’s proper co-efficient of friction gives correct roll bite, less strip breakage and longer roll life. It is extensively in use in 4 stand tandem mill, CIM including in thin gauge sheets.
VistolRoll Ep Oil are premium quality, extreme pressure, bearing and circulating Oil Containing selected additives. These oil have very good load bearing ability in addition to excellent demulsibility characteristics. These oil are recommended for use in no-twist-rod mills and also in applications where severe load conditions are encountered