Our prefabricated and modular cold rooms are designed to perfection and are widely used in different industries. These prefabricated and modular cold rooms are easy to clean and maintain and are made up of thick foam impact panels that provide insulation to the structure. These are appreciated all across the globe for some of the highlighting attributes including the following:

• Sturdy
• Robust in structure
• Employs latest technology
• Easy to use and to clean
• Standard aluminum hood and track
• Removable galvanized steel
• Negligible maintenance
• Made up of thick foam impact panels
• Provides insulation to the structure
• Flexible or swing doors that facilitate easy putting in or taking out of material
• Cold store, involving meats, vegetables and dairy products is balanced to the condensing unit at a 5.5 to 6.6°C (10 to 12°F) TD
• Helps maintain a 1.7°C (35°F) room a 80 to 85% relative humidity which is a good range for general storage
• In the freezer room the product is stored below 0°C (32°F)
• All moisture is in the form of ice or frost
• The product is frozen solid and therefore a 5.5°C (10°F) TD is satisfactory for all products

The different parts of these cold rooms are:

Hinges Doors

Features:

• Insulated
• Steel faced for rugged cold storage and environmental applications
• Lightweight

Applications

• Factory pre-hung on metal clad frames-ready for installation
• Ideally suited for retrofit or new construction where hand truck or personnel traffic require access to temperature controlled areas
• Excellent emergency exit doors from coolers and freezers when fitted with panic hardware

Construction

Face Mounted Frame : Vertical casings and header are kiln dried lumber clad with 22 gm. steel.

Panel

Features:

• Heavy duty construction
• Internal hardware reinforcements
• Doors are filled with polyurethane insulation and clad with 22 Ga. G-90 galvanized steel
• White painted with non-directional stucco embossed pattern
• Finish paint to be Imperial white modified polyester with a dry film thickness of 1.0 mil inclusive of primer coat
• All seams are sealed

Insulation

Features:

• Doors are filled with environmentally friendly, non-CFC polyurethane insulation provides outstanding strength and rigidity to the door as well as excellent thermal (R-7.8 / inch) and acoustical performance
• The insulation is injected to fill the door without voids
  
• Steel facings are chemically fused to the insulation to provide vapor tight construction
• Specially designed, non-marking, grey door seals provide a tight seal and are easy to replace
• Available with formed stainless steel panels
• Standard aluminum hood and track
• Full perimeter seals with door guides
• The windows are flush with the panel surface, have no fasteners and can be easily replaced, if needed
• The door's smooth surface, with no seams or fasteners, allows for easy cleaning
• Adjustable speed allows for smooth, easy opening and closing

Cold Storage

Features:

• Compact
• Efficient design
• Heavy duty door heaters
  
• Viewing windows
• Inside casings
• Meat rail provision
• Full width panic bar
• Cylinder locks
• Door closer
• Available in single-slide, center-parting, swinging, and sectional overhead models
• Doors can be manually or power operated
• Corrosion resistant construction
• Freezer door panels have heater cables on all four edges, eliminating the need for a heated floor sill in most applications

The refrigeration units exported by us re fabricated using best grades of raw material procured from reliable sources. These refrigeration units are designed to perfection and are in high demand in the domestic market as well as the foreign front and are widely used in different industries.

Specifications:

Ice Cube

SQ – 45

• Daily Production: Up to 40 kg
• Storage bin cap: 04 ltrs
• Dimension: H 830 x W 525 x D 500 (mm)
• Compressor Unit: 220v - 240v, 50Hz, 0.39 KW

SQ – 235

• Storage bin cap: 250 ltrs
• Daily Production: Up to 225 kg
• Dimension: H 1460 x W 760 x D 630 (mm)
• Compressor Unit: 220v - 50Hz, 1.0 KW

Features:

• Unique Modular Design
• Reliable Electronic Control
• S. S Water Tray Can be removed to clean/sterilize
• Space Saving Design
• The System has no moving parts
• No Gear Motors
• Ice is made with the spray system
• Puf Insulated Stainless Steel Ice Bin
• Stack on Combinations
• Power Saving Ice Production

Ice Tube

Description:

• The Unique design of our Tube Ice Machine Freezes Ice automatically in the Vertical Stainless Steel tubes by the Refrigerant circulating around tubes in freezer shell
• The Swril of water falls from the top of each tube
• The hole is formed during the formation of Ice because of the falling film of water freezing takes place inside the vertical tubes
• As the water freezes, the impurities are washed back to the sump tank to be released as and when required
• When the Ice in the tubes is frozen to the desired thickness
• Hot gas is released automatically in to the freezer
• Shell releasing tubes of Ice on to a cutter
• The cutter cuts Ice pieces of desired preset length

Specifications:

• lindrical Ice is available in three standard diameters: 13/8", 11/8" & 7/8"
• Standard length: Approximately 1" or customized form
• Capacity: From 1500 kg to 40,000 kgs. of Tube Ice per day
• Models: 1500 kg to 5000 kg of Tube Ice per day are operational on Ammonia & R-22 refrigerant

Advantages:

• ighly efficiency
• Consumes less power
• Lesser space required for production
• Ice Produced in batches of 20 minutes
• Does not require any replacement parts for a long period
• Investment lower than Block Ice Plant
• Easy delivery through screw conveyers
• Available in different packed quantity
• Minimum maintenance

Applications:

• Cement Mixing Plants
• Air Lines
• Flight Kitchens
• Chemical Industry
• Catering Services
• Meat Processing Plant
• Poultry Packers
• Sea Food Process
• Hotel & Bars
• Restaurants
• Fishing Industry
• Diary Plants
• Bakeries

Flake Ice Machines

Features:

• Simple construction
• User friendly
• Robust
• State of the art design
• Wide range of production capacity
• Meets specific requirements of food, chemical, pharmaceutical, heavy
• Construction & other industries and applications
• Available with PUF or polystyrene insulations, as per customers choice

Operations:

• PE Ice maker starts producing continuous subcooled Ice with in few minutes when drive, other components and refrigeration unit are connected
• Freshwater, precooled in Ice maker is pumped to the top of the machine
•  The water distributions system forms a uniform lay