Straw Reaper is a threshing machine, cut, threshed & cleaned the straw in one operation. The wheat stalks left after combine harvest are cut by an oscillating blades while revolving reel pushes them back toward & auger. Our harvester reapers are as per following specification:

Specifications	57"
Cutter Bar Width (mm)	2260
Belt	37
Heigth of Cutter	60
Roll Dia (mm)	460
Speed	Mechanical
Width of Thresher Drum (mm)	57"
Dia (inch)	635
Blades of Belt	304
RPM	850
Width of Concave (mm)	1575
Adjustment	Mechanical
Blower Dia. (mm)	660
Blower	200
Types of Blades	3
Tyre Size	700-19
Length without pipe (mm)	3657
Width (mm)	2540-
Required HP	35

We manufacture superior quality straw reaper that is designed to separate seeds and grains from husk and straws effectively. Our straw reaper as per following specification:

Specifications	50"
Cutter Bar Width (mm)	1830
Belt	31
Heigth of Cutter	60
Roll Dia (mm)	460
Speed	Mechanical
Width of Thresher Drum (mm)	50"
Dia (inch)	635
Blades of Belt	256
RPM	850
Width of Concave (mm)	1397
Adjustment	Mechanical
Blower Dia. (mm)	660
Blower	230
Types of Blades	3
Tyre Size	700-19
Length without pipe (mm)	3657
Width (mm)	2222-5
Required HP	35

Straw Reaper is a threshing machine, cut, threshed & cleaned the straw in one operation. The wheat stalks left after combine harvest are cut by an oscillating blades while revolving reel pushes them back toward & auger. The stalks are conveyed into the machine by the auger & guide drum, which reaches the threshing cylinder which cut the stalks into small pieces against concave.

It give superior separating performance. The short fragment (straw) fall through the bars of the concave. Double Blower operating just behind rushes the straw to trolley attached & separate the dust particles. Our harvester straw reapers are as per following specification:

Specifications	61"
Cutter Bar Width (mm)	2260-6
Belt	39
Heigth of Cutter	60
Roll Dia (mm)	460
Speed	Mechanical
Width of Thresher Drum (mm)	61"
Dia (inch)	635
Blades of Belt	320
RPM	850
Width of Concave (mm)	1676
Adjustment	Mechanical
Blower Dia. (mm)	660
Blower	200
Types of Blades	3
Tyre Size	700-19
Length without pipe (mm)	3657
Width (mm)	2540-
Required HP	35

The cutting rate of these harvester combines are high and the entire harvesting work of a big firm can be performed within a couple of hours. The fuel consumption rate is very low and the maintenance cost is almost zero.

Technical Specifications:

CUTTING MECHANISM
Cutter Bar Width	3.96 Meter (13 Feet)/3.6 Meter (12 Feet)
Cutting Height	Cutting Height
THRESHING & CLEANING MECHANISM
Threshing Drum	P
Width (mm)	1270 1270
Speed rpm	725-850
Speed Adjustment	Mechanically
STRAW WALKER
No. of Steps	5
Length	3780mm
Width	235mm
CLEANING SIEVE AREA
Upper Sieve Area	2.30 m2
Lower Sieve Area	1.50 m2
MAIN DIMENSIONS	Transport	Working
Length	11730mm.	8450mm.
Width	2700 mm.	4600mm.
Height	4050 mm	4050mm.

Our range of agricultural roto seed drills include seed drill front wheel type that is used for sowing wheat, maize, mustard, pea etc., in a fully tilled field. Some of the features of our range include:

Technical Features
VISHAVKARMA	Working Width (Inches)	Total Width (FOOT)	H.P. Required	Working Depth (Inches)	No. of Blades
VAID- ROTO	60	6	40 - 45	6"	42
VAID -ROTO	69	7	50 - 60	6"	48

Our Zero Drills - Till Seed Drill is developed to save time, fuel & irrigation expenses. This machine is used for all types of seeds (wheat, maize, soya, etc) on zero - tilled or semi - tilled soil.

Standard equipments: This zero drill is specially designed for direct sowing of wheat, maize, mustard, pea etc. after harvesting of paddy.

• It does minimum tillage of the field & thus increase the yield.
• Depth of seed sowing is controlled by the two wheels.
• The tine are designed so to make efficient use of tractor power.
• It is available in 9 rows, 11 rows & 13 rows.
• Three point hitch is also available.

Technical Features
Technical Data	VAID 60	VAID 75	VAID 90
Overall Width	72"	87"	102"
Working Width	60"	75"	90"
Row Number	9 rows	11 rows	13 rows
Row Spacing	7.5 "	7.5 "	7.5"
Seed Capacity	65 Kg	95 Kg	120 Kg
Fertilizer Capacity	70 Kg	90 Kg	115 Kg
Power Required (HP)	35 Hp	40-45 Hp	50 Hp

Our wheat threshers are developed to suit large holding farmers & customs hiring. It is very suitable for crop like wheat, gram, mustered. It is operated with 35 hp tractor.

Salient Features:

• It consists of hopper with automatic feeding, which is drive by the gear box.
  
• The threshing unit contain three sharp cutting blades with spike tooth cylinder. The crop is cut into small pieces & rub against the concave. Which give superior separating performance.
• Two aspirators blowers are attached to threshing unit, which separates small pieces of crops residue from the seed.
• Further a shaking & bagging unit are used to collect the seeds.
• The unit is supplied with belts & pulleys to achieve variable cylinder speed, but the speed of blower can change according to requirement.

Technical Specifications
Technical Data	VISHAVKARMA Thresher	VISHAVKARMA Multicrop Thresher
Overall Dimensions:
Length	4320 mm	4520 mm
Width	1550 mm	1550 mm
Height	2440 mm	2440 mm
Threshing Drum:
Width	660 mm	660 mm
Length	915 mm	915 mm
No. Of Blades	Two	Three
Cylinder	24 Bars Tooth	39 Spike Tooth
No. Of Sieves	Two	Three
Blower:
Number of Blower	Two	Three

One - Pass Agricultural Technology for all types of soils in the world. It helps to save tractor hours, Save fuel & save time & labor. These rotary cultivators are for tractor from 40 - 60 Hp.

Standard equipments:

• Single speed gear box with 540 R.p.m. P.t.o.
• Side chain drive in oil bath.
• Skide for depth adjustment.
• Each flange contain six blades.
• 3 pont hitch cat.1

Technical Features
VISHAVKARMA	Working Width (Inches)	Total Width (Inches)	H.P. Required	Working Depth (Inches)	No.of Blades
A - 60	60	75	40 - 45	6"	36
A - 69	69	82	50 - 60	6"	42

MAIN DIMENSIONS	Transport	Working
Length	11730mm.	8450mm.
Width	2700 mm.	4600mm.
Height	4050 mm	4050mm.
Ground Clearance	270 mm.