Products & Services

Cleaning And Finishing Agents

Polyvinyl Acetate Emulsion


We are engaged in manufacturing a wide range of Polyvinyl Acetate Emulsion, Item Code: Aqua-500. These work as a good textile finishing agent and known for their stiffness, optimum effectiveness & accurate composition. Also, these emulsions have resistance against decomposition and a longer shelf life.


Product Description:

  • Product type : Polyvinyl acetate emulsion
  • Stabilizing system : Polyvinyl alcohol


Product specifications:

  • Solids % 105 C 1 hr: 48% +/- 1%
  • pH (1 : 1 with water): 4 – 5.5
  • Average particle size : 0.5 – 2 (microns)
  • Viscosity: 30 +/- 2c,
  • Poise brookfield RPM SPL 6: 250-450 Ps

Product Code: AQUA-450

Scouring Agent


We are involved in manufacturing a wide range of Scouring Agent, Item Code: Aqua-DX200. These are used as a scouring agent and synthetic as well as cotton size oil remover for 100% Polyester and its blends. Also these agents have excellent emulsifying properties, that ensures removal of oils after scouring and prevent re-deposition on fabrics.

Properties of scouring agent :

  • Composition : Blend of ethylene oxide condensates with organic solvent
  • Appearance : Clear colorless liquid
  • Ionicity : non-ionic

Features :

  • Excellent scouring properties with good wetting and detergency action
  • Remove all spin finishes & oils and other mineral oil contaminates
  • Sizes of all types producing a high degree of cleanliness
  • Good stability over wide pH range
  • Imparts anti-static properties

Method of application :

  • For micro denier polyester fabrics and its blends.
  • Recommended dosage : DX – 200 : 1.00 to 1.5%
  • Caustic soda : 3%
  • Raise temperature to 110 – 120 C, treat for 45 minutes. drain followed by neutralization as follows.
  • Oxalic acid : 0.5%
  • HCL : 1 %
  • Temperature : 95 C for 30 minutes. (This treatment will revoke all synthetic size and leach out polyester and give very soft handle to fabric)

Product Code: AQUA-DX200

Dyeing / Scouring / Weting Agent


Our customers can avail from us a wide range of Dyeing/Scouring /Weting Agent. This agent helps in removing loom stain, kandy, fold marks, carbon and fungus. Also, this wetting and dyeing agent is stable with alkalis & acid. Some of the properties of this agent are given below:

  • Micro x Micro along with Caustic Poly dyeing can be carried out
  • Kitty can be removed very fast by Product -2810
  • One bath Poly dyeing, and caustic dyeing with the help of product will give good and bright dyeing


Applications :

  • 100% Polyester or Micro x Micro
  • Caustic, 1% to 3%
  • Product -2810, 0.5 to 1%
  • Raise the temp to 80 C or required
  • Hold for 15-20 minutes, cool down temperature to 80 C
  • Add oxalic acid and 2% HCL, hold it for 10 minutes
  • After reducing the temperature to 50 C
  • Acetic Acid, x % to get the pH 4-5
  • Dyes, x %
  • Product, 2810 : 0.2%
  • DFT, 0.1% to 2%
  • Temperature as per fabric's requirement, that is 100 C to 130 C, hold it for 30 C to 45 C.
  • Cool and drain the bath


Scouring and dyeing by one bath method

  • Product: 2810 : 0.5% to 1%
  • Oxalic Acid: 0.5% to 1%
  • Dyes: x %
  • DFT: 0.1% to 0.2%
  • Temperature can be raised as per dyeing requirement, cool & drain the bath


Polyester / Cotton Kitty Process:

  • Soda : 1%
  • H O : 1% to 2%
  • Silicate : 0.1%
  • Product – 2810 : 1% to 2%
  • Raise the temp. 80 C to 100 C as per the requirement of the fabric, can be carried out in jet as well as jigger also


Top Dyed Fabric:

  • Scouring of top dyed fabric and white-r dyeing process can be done in bath
  • Caustic : 0.5% to 2%
  • Product 2810 : 0.5% TO 1%
  • Run the fabric for 20 minutes, add H O 1% and silicate 1%
  • Raise the temperature to 70 C to required temperature for 20 minutes
  • Drain the bath to get temperature 50 C faster
  • Add product 2810, 0.5% with white-R and acetic acid or oxalic acid to maintain ph 4-5 and then complete the dyeing by taking temperature as per fabric's requirements

Non Yellowing Cationic Finishing Agent


Available with us is a wide range of Non Yellowing Cationic Finishing Agent, Item Code: Aqua-Catasil-H. These are fatty acid based polyminc in the form of cream color paste and dispersible in cold water. Also, these can be applied to natural and synthetic fabrics by the process of padding and provide smoothness to them.



  • Ionic:- Cationic
  • pH OF 1% Solution:- 6.0 TO7.0
  • Compatibilty:- Cationic active producer- good
  • Nonionic actiove product: Good



  • By exhause process- 1-2% of pida supreme catasil of bath liquor 5.5, 15-20 minutes. remove the material, hydroextract and dry.
  • By padding process—5-20mg/lts pida, supreme catasil pick-up 60% to 100%, at room temperature

Product Code: AQUA-CATASIL-H

Polyvinyl Acetate Emulsion


We are engaged in manufacturing a wide range of Polyvinyl Acetate Emulsion, Item Code: Aqua-450. These work as a good textile finishing agent, and has stiffness & higher shelf life. These are manufactured using superior chemicals and stringently tested for quality by our experts. Also, these are hygienically formulated and packed with minimum human touch.


Product description:

  • Product type : polyvinyl acetate emulsion
  • Stabilizing system : polyvinyl alcohol


Product specification:

  • Solids % 105 C 1 Hr : 45% +/- 1%
  • pH (1 : 1 with water) : 4 – 4
  • Average particle size : 0.5 – 2 (microns)
  • Viscosity: 30 +/- 2c,
  • Poise brookfield RPM, SPL 6: 350-500 Ps

Product Code: AQUA-5100

Polyvinyl Acetate Emulsion


Our customers can avail from us a wide range of Polyvinyl Acetate Emulsion, Item Code: Aqua-5100. These are a commonly used co-polymer & water based emulsion, used as a textile finishing agent. Acetate emulsions are water resistant and used to provide body high stiffness, on which these are applied.


Product description:

  • Product type : Polyvinyl acetate emulsion
  • Stabilizing system : Polyvinyl alcohol


Product specifications:

  • Solids % 105 C 1 Hr: 50% +/- 1%
  • pH (1 : 1 with water): 4.0 – 5.0
  • Average particle size: 0.5 – 2.0 (microns)
  • Viscosity: 30 +/- 2c,
  • Poise brookfield RPM, SPL 6: 300-450 Ps

Product Code: AQUA-500

Scouring And Cleaning Agent For Textiles


Our customers can avail from us a wide range of Scouring And Cleaning Agent For Textiles. These are also known as aqua polycon – SR, and used as a scouring and cleaning agent for textiles & machines. Colorless low foaming alkaline agent, these are an-lonic in nature. Also, these are soluble in all proportion in water and stable to acids, alkalis, hard water and salts. Cleaning agents effectively removes lub oil stain and used in pre-scouring of grey fabrics. Moreover, stains caused due to graphite, rust, grease & oil can also be removed with the help of this agent. These are also used in reduction clearing of dyed or printed polyester fabrics. Scouring agent is also used for cleaning of high temperature dyeing machine.


Application in stain removal:

  • For light to medium stains the grey fabric should be worked to 4 – 6 ends on jigger with 8 – 10 gms/ltr. of Polycon – SR AT 70 C
  • For heavy stains, the grey fabric should be padded with 30-50 gms/ltr. Of Polycon-SR kept over 8-12 hours and then scoured as above
  • Polycon-SR can also be used in hand spotting
  • Reduction clearing of dyed/printed polyester and its blens
  • The disperse dyed / printed goods can be reduction cleared in bath containing
  • Polycon – SR 2 to 3 gms/liters and sodium hydro sulphate 2-3 gms./liters at 60 c to 70 c for 20-30 minute


Machine cleaning :

  • 2 – 4 gms/liters Polycon – SR
  • 1.5 - 3 gms/liters caustic Soda flakes at around 90 C for 20-25 minutes
  • Drain and rinse well with fresh water

Lubricating Agent


We are involved in manufacturing a wide range of Lubricating Agent. These are used for removing crease and abrasion marks, and prevention in disperse dye stuffs dyeing in jet dying machine. Also, these are low foaming and soluble in water in various proportion. These are compatible with dyeing ingredients and has stability to dilute acid, hard water, alkali and has also good thermal stability.

Stiffening And Hand Modifying Agaent


Our customers can avail from us a wide range of Stiffening And Hand Modifying Agent. This works as a good stiffening & hand modifying agent for finishing synthetic and blended fabrics. Also, it has a light color, non-toxic and water based emulsion. This agent also has medium viscosity, that dries a transparent film. Also, this is used as bonding agent for tiles, woodblock, and plaster board.

Polysil Finishing Agent


Our customers can avail from us a wide range of Polysil. These are an excellent finishing agent for polyester has blends of composition. These are non yellowing agent and improves brightness of dyed shade. Also these provide excellent softness and smoothness to the fabrics. Some of the unique features of polysil are given below:

  • Rich handle
  • Soil releasing properties
  • Bounce


Physical properties:

  • Colour: transparent
  • pH OF1% solution: 6.5
  • Ionic nature: non- ionic
  • Stability: more than one year
  • Compatibility: catonic and anionic
  • Solubility: dilute with cold water
  • Quantity: 10-30 GPL
  • Technique: Exhause at 40 degree C

Aqua Microsil


We are involved in manufacturing a wide range of Aqua Microsil. These are highly concentrated textile finishing chemicals, that should be stored in cool, dry and away from boiler place. Also, these are amino functional groups and is in form of micro emulsion, that imparts finishing to the treated fabrics. Moreover, these are non-ionic in nature and compatible with most of the finishing agents. However, the compatibility with an-ionic product should be pre-assessed.


Features of Aqua Microsil:

  • Suitable with both synthetic & natural
  • Provides better crease resistance to fabrics
  • Improved tear strength
  • Imparts full hand with luxurious soft-feel to the treated fabric



Microsil, in its highly concentrated form, can be used as it is or can diluted 1:9 parts with soft water. Diluted 20-60 gms per liter, is recommended for best finishing results or 2 to 5 gms per liter in concentrated form. Microsil is a self curing type of product and would cure even on drying. For better results curing at 160 C to 180 C for 30-50 seconds is recommended.


Physical properties:

  • Color: Yellow to clear solution
  • pH : 5 to 6
  • Appearance : Viscous oily liquid
  • Diluent : Soft water
  • Nature : Non-ionic

To,Vivacious Pharmatex Private Limited

Promote Your Business with IndiaMART
Enter Your Website URL