 |  |
|
|
|
|
|
 |
|
|
Control Panels The organization presents a variety of Electrical Power Control Products and Panels. These products are ISO 9001:2000 certified, CETL certified, ETDC certified and IEC certified that. These wide range of products includes - |
| Control Panels Applications: • Process Control Systems • Transfer Pump Control • Lift Stations • Groundwater Treatment Systems • Wastewater Treatment Systems • Well Pump and Water Tower Control • Chemical Feed Pump Systems • Gas Collection Sump Dewatering • Pneumatic Pump Controllers • Environmental Remediation Systems • Vapor Extraction Controls • Odor Control Systems • pH Controllers • Drying Systems Control Features: As per your requirements the features will be conformed. After getting orders and conformation, we design and develop the panels. We use Micro Controller and Embedded Technology. | |||||||||
| ||||||||||
| APFC Panels Application: It is installed at the induction load areas where the power factor comes down. Generally installed at Factories, Big Offices, etc. Models & Amps/ Kva Rates: Upto 800 Kvar Features: • World advanced Micro controller Technology is used • Auto/Manual selector is available • Kvar by Kvar selectable system • Stage on LED indications are available • Stage to stage capacitor boosting & reconnection intervals; 20 secs delay • Panel mountable, serviceable • Fully enclosed wall mountable • Working temperature up to 55 degree celsius • Cable entry: Bottom (top optional) • Incoming control and total protection of panel with 3pole/ MCCB • Soft relay operation of capacitor: boosting help for smooth power factor • Management & avoid sound and disturbances • Power & control wiring: by copper multi strand ISI wire • Capacitor bank rating: 440v/according to your load required KVAR • For standard safety on Capacitor efficiency losses, Hunting etc., IEC (International Electric Code) Standards • Higher, Healthy PF maintaining (between 0.94-0.99)brings • Good quality & Healthy run of your induction load(Motors, Air conditioners, compressors, chokes, etc • It adds life to your, A/C, Tube lights, Compressors, Motor & other loads. • Off course, great escapes from the penalty from the electricity Board • And chance of getting good incentive from the electricity Board Clients: • Yazaki Wiring Technologies Pvt. Ltd. • Katti-Ma Exports Pvt. Ltd. • Frontier Business Systems Pvt. Ltd. • King Electricals • Radhakrishna Electricals • Vin India Exports Pvt. Ltd. • R.R.Park Plaza • Hotel Ramanand (3 Star Hotel) • Metro Electricals • CF & IS • Imcops and many more | |||||||||
| ||||||||||
| AMF Panels Application: AMF Panel & Battery Chargers are used where the generators are installed between main AC and load. It will Start and Stop the Generator automatically and Changeover the EB/Generator lines. Models & Amps/ Kva Rates: 15Kva, 25Kva, 40Kva, 60Kva, 80Kva, 100Kva, upto 600Kva and more. Features: • Auto/Manual Selector is available • Auto delay in start of genset • Genset stop with delay of 3 minutes • Hooter-alarm annunciation for fail to start • Checklist to find the fault and to correct • 4st switch control for healthy start and stop of genset • Manual Start & Stop Switch • Emergency Stop switch is available • Auto LLOP (Low Lube Oil Pressure) and (High Water Temperature) protections are available. (LLOP & HWT Sensors-Relays are not part of this panel. We provide control wires. Generally generator technicians shall provide this safety sensors according to their Generator’s standard.) • Cost of 2nos of 4st/Qst switches and 12V heavy-duty stop solenoid are added • All comes in a 14 /16 Swg panel with door. Clients: • BSNL • MecRennet • Anna Theatre • Hi Breeze • Vishnu Motors | |||||||||
| ||||||||||
| Low Tension Panels Application: Different types of Distribution panels, EB Metering Panels, CT Panels, etc., to be installed at EB Power Supply input point at the Resident or Site. Load has to be taken after the EB meter from this panel. It has Electrical and Govt. Standard for the approval. Models & Amps/ Kva Rates: As per the requirements. Sometimes more than one service, the metering Panel shall be constructed. Features: Main EB Incomer compartment connected to Bus bar and through Cut out, EB Metres and MCB are constructed. Clients : Lot of Builders and Electrical contractors. | |||||||||
| ||||||||||
| PLC Control Panels We are manufacturers of PLC Control Panels, AC/DC Drive Panels, Digital COntrol Panels etc. Application: For the Industrial, Domestic and Construction areas, where the Automation system is required. Models & Amps/ Kva Rates: As per Customer or Contractors or Consultant's requirements. Clients: Various Industries and Customers. | |||||||||
| ||||||||||
| AC/DC Drive Control Panels Application: Used to control the Sensitive motor operations and machineries. These drives could be designed and controlled as per Customer's requirement. Models & Amps/ Kva Rates: One Amps to any required Amps. Clients: Many Electrical Companies, Industries, Contractors, Builders and Flat Promoters. | |||||||||
| ||||||||||
| Energy Saver Control Panel For Your Welding Machines, Lifts, Cranes & all Industries Important Features: * It reduces the 40 to 60% of Consumption of Electricity by ECM Management * Avoids Low Voltage Drop by Induction Load, Supplies Electric Current with the perfect. * Combination of Condensed & Real Energy for the Best work output. * Saves the Life time of the Welding Machines, & Lifts and Avoids over current Consumption. * It reduces the 40% to 60% of Consumption of Electricity by ECM Management * Avoids Low Voltage Drop by Induction Load, Supplies Electric Current with the perfect. * Combination of Condensed & Real Energy for the Best work output. * It reduces the 40% to 60% of Consumption of Electricity by ECM Management * Avoids Low Voltage Drop by Induction Load, Supplies Electric Current with the perfect. * Combination of Condensed & Real Energy for the Best work output. * Saves the Life time of the Welding Machines, & Lifts and Avoids over current Consumption. Special Features: • Ammeter is available (Optional) • Breakup Kvar’s for close PF Management • Auto/ Manual Selector is available. • Stages of LED indications is available • Working Temperature up to 45° Degree Celsius • Incoming Control and total protection of panel with 3pole/ MCB or MCCB. • Stages to stage capacitor boosting & reconnection intervals: Programmable. • Soft relay operation of capacitor: Boosting helps for the smooth Power Factor Management & avoid Sound and disturbances. • Power & control Wiring: By Copper multi strand ISI wire. • Capacitor Bank Wiring: 440V / Delta according to your load required Kvar. • Using ISI Standard, Capacitors with in built fuse, Against efficiency losses, Hunting, & Burst outs Etc. • Reaching IEC Standard ( International Electric Code) • Cable Entry: Bottom ( Top Optional) | |||||||||
| ||||||||||
| Phase Sequence Corrector Application: RYB phase sequence corrector installed at three phase UPS, three phase Air Conditioners & Sensitive Three Phase equipments. Models & Amps/ Kva Rates: 30 Amps, 40A, 60A, 100A, 125A, 150A, 200A, 250A, 300A, 400A, 450A, Upto 630 Amps. Features: • Corrects the RYB Phase Sequence, whenever the sequence is changed or reversed • For Three Phase UPS, during sequence changed or reversed, UPS will start use the battery power & Battery may become empty within half or one hour. So the entire operations and server failure shall be happened • The Same way 3Ph. Air Conditioner will be tripped off, due to sequence reversal & the entire office will be suffering or disturbed because of AC. Failure. • Avoid damages during Phase sequence changes or reversal • The Sequence Corrector will switch off, during the single phasing or imbalance voltage occur & later, Auto-reset after restoration • No break downs of lifts, Machineries, UPS, 3 Ph. Air conditioner or any motors or 3-phase system due to the change in sequence • Certified by ETDC (Electronic Test & Development Center) Govt. of India Clients: • ICICI Banks • Indian Oil Corporation • Air Force • Defence and many more Leading Companies, Showrooms, etc. | |||||||||
| ||||||||||
| Servo Voltage Stabilizer Application: To give the constant Voltage to the CNC Machines or any other load, factories and Offices, etc. Models & Amps/ Kva Rates: Upto 200 Kva. It starts from 1 Kva. The Voltage ranges are 170-270, 140-270, 360-470, 295-470 and many more. Features:
| |||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||
| Neutral Failure Circuit Breaker Application: Used at Flats, Residence, Offices, Buildings & Factories. This protects a Single Phase Equipment and Wirings from Neutral Failure, High Voltage, Phase to Phase Current, 440V, etc. Models & Amps/ Kva Rates: 30 Amps, 40A, 60A, 80A, 100A, 150A, 200A, 250A, 300A, 350A, 400A, 450A, upto 630 Amps. Features: • World advanced Micro Process Controller Technology is used • Automatically cut off the Main A/c, when sudden high voltage, 440V, Phase-to-Phase or phase –in- Neutral • High Voltage Cut off at 295V(L&N) is also available • Avoids fire and damages to the Single Phase electrical appliances and wiring • Current Sensing devices like ELCB, MCB and Fuse Carriers will NOT trip off during the Neutral failure • Certified by ETDC (Electronic Test & Development Center) GOVT. of India What happens when the Neutral is Failed • If Neutral fails, phase will return to the Neutral wire and due to this, phase will pass through the entire Neutral wirings, which gets high voltage (ie) above 380V. So that all the Single Phase Appliance will receive Phase 1 & Phase 2 instead of Phase & Neutral. i.e., 220V 220V = 440V. i.e., Phase to Phase • When Neutral fails at the balance or unbalanced load condition, using Micro Controller Technology, our NFCB will sense the return phase and it will trip the Power to the load • Even if high voltage occurs, in any phase line, load will be tripped off Clients: • Tamil Nadu Police Quarters - Head Office • Prahari Builders • Swathi Aqua • Air Fridge • Nalsa Medical Industries and many more | |||||||||
| ||||||||||
| Automatic Phase Changer & Changeover Application: Installed at Residents, Small Offices where Single Phase Equipments are used. During Phase failure, this unit automatically take the available Phase Lines and Distribute to the non-avialable phase lines. Models & Amps/ Kva Rates: 30 Amps, 40A, 60A, 120A, 180A, 300Amps. Features: • Automatically changes the available phase lines to the non-available phase lines. Certified by CETL-Govt. of Tamilnadu • Restore to the actual lines when the failure lines are restored • Cut off at Low Voltage and changes to the next lines; Changes in milliseconds • Phase changer cum changeover model with auto switch off the generator (VTSL Model); Phase Changer with Distribution Board Models also available Clients: • Building Promoters • Builders • Electrical Contractors and many Residents & 600 other dealers | |||||||||
| ||||||||||
| Automatic Power Control Products
| |||||||||
| ||||||||||
| Copyright © Volt-On Engineering, All Rights Reserved (Terms of Use) Developed by IndiaMART InterMESH Limited |
 |
