Airless Spray Painting Equipment

We are engaged in offering Spray Equipment that is widely used for spray application, semi solid dispensing and pipe coating applications. Fabricated using quality raw material, the range is durable, reliable, corrosion & rust resistant and require less maintenance. Our equipment range is in compliance with international quality standards and is applicable in areas like heavy engineering, railways, pharmaceuticals and aeronautics. Our range includes Two Components Spray Equipment, Airless Spray Painting Equipment, High Pressure Equipment - VRC Mix HP, Spray Painting Equipment, Low Pressure Equipment - VRC Mix LP and High Pressure Heater-3kW. The range is also customized as required by client.

Two Components Spray Equipment

Two Components Spray Equipment - Cheetah
We are manufacturing and supplying of two components spray equipment – cheetah which is ideal for two component high viscosities, solvent less, low solvent, semisolid, high build and marine coatings. These are Pneumatically sensed high performance air motor which have high flow rate and stainless steel rust proof hydraulic body. The salient features of two components spray equipment are as follows:

Sophisticated but easy to maintain mixing block with automatic flow valves (for remote control) and NRVs

Easy Maintenance
Ice Free Air Motors
Easy to handle, mounted on robust trolley
Fixed / Variable mixing ratio
Modular design to achieve various mixing ratio

Optional features:

PLC based monitoring system for mixing ratio, digital display and auto flush.
Electrical direct or oil / water jacketed heating
High viscosity transfer pump with ram / drumpress
For very high flow rate Hydraulically driven motors

Technical Specifications

Type	2k-350/ 79x79x150	2k-350/ 110x110x110	2k-350/ 110x110x79	2k-350/ 110x110x58	2k-350/275
Mixing Ratio*	1:1	2:1	3:1	4:1	0:1to0:1
Transfer Ratio*	70:1	65:1	70:1	75:1	75:1
Output per Cycle	300 cc	340 cc	300 cc	280 cc	275 cc
Air Motor Piston Ø	350 mm	350 mm	350 mm	350 mm	350 mm
Stroke Length	120 mm	120 mm	120 mm	120 mm	120 mm
Recommended Spray Volume per minute	7.5 ltr.	8.5 ltr.	7.5 ltr.	7.0 ltr.	7.5 ltr.
Air Inlet Pressure Max.	6 bar	6 bar	6 bar	6 bar	7 bar
Output Pressure Max.	420 bar	390 bar	420 bar	450 bar	525 bar
Air Consumption N ltr/min Max.	6800	6800	6800	6800	6800
*Other ratios on request

Request a Quote

Airless Spray Painting Equipment

Airless Spray Painting Equipment - RHINO
We have designed heavy duty airless spray painting equipment -Rhino for tough working conditions. These are ideally used for high viscosity, solvent less, low solvent coating, semisolid coating and marine coating. The salient features and specifications of airless spray painting equipment are as follows:

Pneumatically sensed high performance Air Motor(No over center spring loaded mechanical changeover)
High Flow Rate
Stainless Steel rust proof Hydraulic Body
Easy Maintenance
Ice Free Air Motors
Light and Easy to handle

Technical Specifications

Type	45.210	60.150	30.275	45.275	60.210	55.275	75.210	75.275
Transfer Ratio*	45:1	60:1	30:1	45:1	60:1	55:1	75:1	75:1
Output per Cycle	210	150	275	275	210	275	210	275
Air Motor Piston Ø	230	230	230	270	210	300	300	350
Stroke Length	120	120	120	120	120	120	120	120
Recommended Spray Volume per minute	5.5	6	10	7.5	5.5	7.5	5.5	7.5
Air Inlet Pressure Max.	6	6	6	6	6	6	6	6
Output Pressure Max.	270	360	280	270	360	330	450	450
Air Consumption N ltr/min Max.	3000	3000	3000	4000	3000	5000	5000	5000
*Other ratios on request

Request a Quote

High Pressure Equipment - VRC Mix HP

We are manufacturing and supplying of high pressure equipment – which is ideal for two component high viscosities, solvent less, low solvent, semisolid, high build and marine coatings. These are Pneumatically sensed high performance air motor which have high flow rate and stainless steel rust proof hydraulic body. The salient features of high pressure equipment are as follows:

Sophisticated but easy to maintain mixing block with automatic flow valves (for remote control) and NRVs
Easy Maintenance
Ice Free Air Motors
Easy to handle, mounted on robust trolley
Fixed / Variable mixing ratio
Modular design to achieve various mixing ratio

Optional features:

PLC based monitoring system for mixing ratio, digital display and auto flush.
Electrical direct or oil / water jacketed heating
High viscosity transfer pump with ram / drumpress
For very high flow rate Hydraulically driven motors

Technical Specifications

Features	Standard	Optional(on request)
Mixing ratio range	UP to 10.0:1 Increment	-
Application	Airless/Air Assisted	-
Flow rate	Maximum 6.8 liters per minute	Higher flow rate
Maximum fluid pressure	450bar
Air pressure requirement	4-7bar	-
Electrical power requirement	230v AC 50 Hz Single phase	As per available power source
Material usage reporting	Reporting of component consumption accumulative+day consumption	-
Pot life monitoring	Pot life monitoring of mixed material	-
Pressure monitoring	Online system health checking by pressure monitoring.	-
Level Monitoring	Online container level monitoring based on materialconsumption	-
Communication	RS 232 communication port for printer/network/PC. Protocol modbus	SCADA
Operator Interface	Touch screen graphical display with audio visual alarm system	-

Request a Quote

Spray Painting Equipment

Spray Painting Equipment - TIGER
We are offering to our clients, a wide range of medium duty airless spray painting equipment- tiger which are ideal for liquids of medium viscosities, primers, finish paints and paints of medium viscosity & particle size. These are equipped with pneumatically sensed high performance air motor and stainless steel rust proof hydraulic body. The salient features and specifications of airless spray painting equipment are as follows:

High Flow Rate
Easy Maintenance
Ice Free Air Motors
Light and Easy to handle

Technical Specifications

Type	30.70	40.110	12.150	28.20	30.150	28.40	60.70	16.70	12.150	14.20	14.40
Transfer Ratio*	30:1	40:1	12:1	28:1	30:1	28:1	60:1	16:1	12:1	14:1	14:1
Output per Cycle	70	110	150	20	150	40	70	70	150	20	40
Air Motor Piston Ø	110	160	110	80	160	80/110	160	80	110	60	60
Stroke Length	120	120	120	70	120	120/70	120	120	120	70	120
Recommended Spray Volume per minute	3.5	5.5	7.5	2	6	2	3.5	3.5	7.5	1.2	1.2
Air Inlet Pressure Max.	8	8	6	6	8	6	6	8	6	6	6

Request a Quote

Low Pressure Equipment - VRC Mix LP

We are manufacturing and supplying VRC-MIX low pressure equipment for our esteemed clients. These low pressure equipment are easy to use owing to the user friendly touch screen operator interface. The salient features of low pressure equipment are as follows:

Features	Standard	Optional(on request)
Mixing ratio range	UP to 30.0(in 0.1 Increments)	-
Accuracy tolerance	Down to 1% *User settable	-
Flow rate	0.1 to 4 liters per minute	Higher flow rate
Maximum fluid pressure	30 bar	240 bar
Air pressure requirement	4-7bar	-
Electrical power requirement	230v AC 50 Hz Single phase	As per available power source
Multi-colour application(colour change facility)	4 colours, 4 hardeners & 2 solvents, 4 different recipes can be stored	Modular system. No limit to colour addition and recipes
Flushing	Manual as well as inbuilt auto flushing cycle programmable sequential air-solvent purge	-
Material usage reporting	Reporting of component consumption accumulative+ daily consumption	-
Pot life monitoring	Pot life monitoring of mixed material	-
Pressure monitoring	Online system health checking by pressure monitoring.	-
Level Monitoring	Online container level monitoring based on materialconsumption	-
Remote Operator panel	-	Ex-proof remote operator panel
Communication	RS 232 communication port for printer/network/PC. Protocol modbus	SCADA
OperatorInterface	Touch screen graphical display with audio visual alarm system	-