Industrial Seals And Pipes

We make the best Water Stop Seals & Gate Seals in the entire industry. These Plastic dies by available in the market by using the superior raw material. Water Stop Seals in types A, B, C, E, F, G, H, O and R to name only a few with central bulb and V as well as J types are available.

 

These are used in Dam walls and beds, canal gates, barrages, aqua ducts, reservoirs and siphons etc. in sizes from 90 mm to 390 mm in width. We have the skilled manpower and the latest machineries owing to which even the minutest detail is taken care of. We are prime suppliers of this machinery and have won accolades for its durability, simple configuration and easy installation features. These are extensively used in engineering and construction industries and can also be customized as per the clients’ requirements.

We are one of the noted suppliers of Victaulic Seals, Clamps and Pipe that are designed in compliance with International quality standards. These are made with high quality raw material and are compact in size and are highly efficient with a long service life. These pipelines are used in low pressure water or dissolved cement lines. They are made in state of the art facilities by skilled engineers who believe in quality and excellent after sales services. They are highly durable with a long service life.

Victaulic Seal

These are rubber seals with a special cup type internal structure. These seals cover the joint and seal them. Clamps are tightened on these seals.

Victaulic Clamp

These are special clamps to join the Victaulic pipes and hold them in place. They are casted from special grade hardened alloy steel.



Victaulic Pipes

These pipes are made in various sizes from 2.5 inches ID to 8 Inches ID. These pipes have special Victaulic ends and are fabricated from seamless or ERW mild-steel, depending on the pressure.

 

We are prime suppliers of Rock Bolts/Anchor Bolts/HE-Bolts and Expansion Shell and Plug Assy which are highly acclaimed for its durability, simple configuration and easy installation features. These are extensively used in engineering and construction industries and can also be customized as per the clients’ requirements. They are made in state of the art facilities by skilled engineers who believe in quality and excellent after sales services The Company manufactures various types of Rock Bolts of sizes 1/2" to 1.25" Hex in lengths up to 4.5 mts. & 6.0 mts., for use in Mines, Tunnels and Embankments as rock anchors.

 

Rock bolt is a stress or tensioned reinforcement element consisting of a rod, mechanical or grouted anchorage and a plate and nut for stressing by torquing the nut or for retaining tension applied by direct pull. It is also known as active rock anchor.

 

Rock bolts are manufactured from TMT grade special steel as per IS: 8266/76 specifications in various types.

 

Expansion Shell Type:

These bolts use expansion shells and plugs made of cast steel with left hand thread, firmly gripping the rock and the bolt forming anchorage. These are made of two types.

 

• Expansion Shell Type Grouted

• Expansion Shell Type Un-grouted

 

Perfo Type:

These anchors are supplied with a perforated shell sleeve, which is filled with mortar and installed in the hole. A deformed steel anchor bar is pushed into the tube, causing mortar to squeeze through perforations and bond to the sides of the drill hole.

 

Resin Grouted Type:

These anchors are chaptered conically at one end and are threaded on the other. The conically tapered end is pushed into the resin cartridge placed at the bottom of the drill hole.

 

Grouted Anchor Bars:

These anchors are made of deformed steel bars threaded on one end and placed into the drill holes and grouted with "Rich Mortar" for furm grip.

 

Rock Bolts Spares and Accessories:

Heavy 2H Hex nuts, Bevel washers, taper washers in 3, 5, 7, 11, 13 etc. degree, hardened plain washers, bearing plates, "Perfo" tube elements and expansion shell and plug etc. are available in all sizes on demand.

 

Foundation Bolts:

Bolts for anchorage of heavy stationary diesel engines or machines, J-Hooks for roof hangers etc. are also manufactured as per specifications.

We supply an entire range of Seamless Steel Concrete Delivery Pipelines and Accessories and keep innovating them based on current market trends and expectations. Our are precision engineered, designed and developed to meet the requirements of various construction and engineering industries. We are prime suppliers of this machinery and have won accolades for its durability, simple configuration and easy installation features. These pipelines and accessories are used to facilitate transport of concrete from a concrete pump to the site at which concreting is to be done, under high pressure.

 

All over the world, concreting is being done by SCHWING Concrete Pumps, due to their high performance standards and reliability. These pipelines are hence made as per the SCHWING's Standards and Dimensions. These concrete delivery pipes are made of highly wear resistant material and are seamless in construction. The special flanged collared joints at the ends have stood the test on the sites. In combination with the respective couplings and accessories, they comply with the requirements of absolutely trouble free pumping.

 

Certain features of these pipelines are given below:

 

• Normal pipes with a wall thickness of upto 4.5mm. are suitable for pumping pressures of up to PN145.

• Thick walled pipes with a wall thickness of 7.1mm. are suitable for concrete pumps of pumping pressures upward of 145PN.

• Super high pressure pipes with wall thickness of 7.1 to 10MM., depending upon the pipeline diameter are suitable for PN200.

 

Sizes made are normally DN150 (6 inches) or DN125 (5 inches).

 

Various types of items manufactured are:

 

Concrete delivery pipes

These pipes are made in lengths of 1 to 6 metres and are delivered with the special SCHWING male and female flenges.

 

Pipe Bends

For changes of pipeline directions bends are offered in 120 deg., 90 deg., 60 deg., 45 deg., 30 deg. or 15 deg. Normally the bends have a radius of 1 metre, though they can be longer or shorter as per the needs. These also have special male and female flanges on ends.

 

Transition Pipes

These are short pipes of length 0.5 to 1.5 metres for connecting high pressure delivery pipes. These pipes have normal male flanges on both sides.

 

Pipe Couplings

The super high pressure pipes are exclusively connected by means of cup type tension coupplings. These couplings are used to clamp the joints of male and female flanges. These come in lever type or wedge type designs.

 

Sealing Rings

These rings are special grade rubber rings used to seal the joint of male and female flanges.