IndiaMART.com

Products & Services

Construction Equipment

Offered is range of fine quality construction equipments which are provided in different specifications and are largely utilized in the construction industry.

Walk Behind Roller

Walk Behind Roller

Compaction is an artificial increase of earth density through mechanical equipment. During construction of Roads, Dams or Runways good compaction offers a lot of advantages. Such as less future settlement and increased load bearing capacity.

WALIA Double Drum Vibratory Road Roller, Walk Behind Type, having Rolling Width of 600mm to 750mm and Weight 900kgs. to 1100 kgs Approximately. These Vibratory Rollers are Double Drum with Vibrations in Both Drums and an all Wheel Drive. Rollers can Work even on Steep Slopes, Slushy and most difficult Terrain where the normal Roller would easily Bog down. These Rollers Employ the Double Vibratory Principle Providing Superior Compaction.

TECHNICAL DATA

SPECIFICATIONS WVR 501 WVR 751
Net Weight 900 kgs. Approx 1100 kgs. Approx
Drum Width 600 mm 750 mm
Gradeability without vibrations 40.00% 40.00%
Vibratory Drum 2 nos. (F + R both) 2 nos. (F + R both)
Amplitude 0.4 mm 0.5 mm
Centrifugal Force 2 X 1500 kgs. 2 X 1850 kgs.
Engine Make GREAVES GREAVES
Power Rating 5.0 H. P. 10.0 H. P.

Vibratory Earth Compactor

Vibratory Earth Compactor

Vibratory Earth Compactor (Earth Rammer)

WALIA Plate Compactors are self Propelled, Light in weight and compact machine having High forces, low amplitude and high frequency. Application Non-Cohesive Soil, Subgrade, Maneuvers close to Abutments, Retaining walls, Ideal for trenches, Channel Embankments, Back fills jobs, Fcatory floor, Foundations, Bridges approaches etc.

 

Model

Weight (Approx)

Compaction Capacity

Prime Mover

Power Rating

Plate size

Working Capacity

Depth effect

PP-11

95 kgs

1-2 tons

Diesel/ greaves

3.1 H.P

14x24 inch

3000 Sqft/h

6 inch

PP-11(E)

85 kgs

1-2 tons

Electric motor

3.0 H.P

14x24 inch

3000 Sqft/h

6 inch

PP-21

205 kgs

4-6 tons

Diesel/ Greaves

5.0 H.P

20x32 inch

4000 Sqft/h

12 inch

PP-21 (E)

175 kgs

4-6 tons

Electric motor

5.0 H.P

20x32 inch

4000 Sqft/h

12 inch

Bar Cutting Machine

Bar Cutting Machine

WALIA BAR CUTTING MACHINE MODEL PP-32(C): suitable to cut Re-Bars to 8 to 32mm dia, stroke in 5 seconds. Complete with a set of shear blade with multiple cutting edges, powered by 5 h. P. 2800RPMIII ph. Electric motor. Our bar cutting machines are reckoned in the market for efficiency and hassle-free operations. We manufacture these advanced machines with the aid of our team of experts.

Bar Bender Machine

Bar Bender Machine

WALIA BAR BENDER MACHINE MODEL PP-32(B): suitable to bend Re-Bars of 8 to 32 mm dia, upto 1800 angle (maximum), Automatic Bend Angle Setting, Table speed-5 to 6 RPM, complete with a set of bending rollers & pins, powered by 5 h.P. 1440RPMIII. We are proficient manufacturers and suppliers of bending machines. These fully automatic bending machines are operated through manual button and deliver stable performance with optimum safety. Further, our machines enable the users to control the path and return it back automatically.

Needle Vibrator

Needle Vibrator

Walia needle vibrator complete with attachments, shafts (with imported rubber hose & steel coring) 4 mtr/ 6mtr long, 40mm/ 60mm needle. Powered by 3 hp, 440, 3 phase crompton/ kirloskar make electric motor or powered by 1. 95 hp  air-cooled greaves/ field marshals/ villiers make diesel engine. This range of needle vibrators is admired in the market, owing to its optimum performance, easy handling, compacting capability and durability. Along with this, the offered range of needle vibrators is applicable at small construction sites and allied.

Concrete Vibrators

Concrete Vibrators

Functioning method:

W series electric needle or concrete vibrator have an excellent performance compares to other immersion type vibrator available in market. Walia w series vibrator is connected to a micro frequency converter 220 volts:single phase. Vibrator motor is fitted directly into motor head. The motor coils is 100% protected from burning as thermo sensors are inserted in coils,in case of overheating,the needle switches off automatically.

Permissible operating voltage:
220-240v,50hz-60hz,1 phase

Ambient temperature:

00c to 450c

Nical features:


  • Needle vibrators with integrated frequency convertor.
  • Working at 220 volts,1ph,ac.
  • Frequency vibration 12000 vpm.
  • Light weight to use & handy.
  • Protection class:ip 65.
  • Converter box equipped with circuit release breaker with vibrator guard.

Head length (mm) Hose length (m) Cable length (m) Centrifugal force(n) Total weight(kg) Nominal frequency(min)
320 5 10 1160 12. 5 12000
370 5 10 1400 13 12000
390 5 10 3100 17 12000
360 5 10 4850 18 12000
370 5 10 5400 20 12000

Bar Cutter

Bar Cutter

We offer bar cutter that are used in various cutting and bending applications in the construction industry. These are fabricated using high grade materials and components and are appreciated for corrosion resistance, high performance and sturdy construction.

Bar Bender

Bar Bender

we offer an extensive range of Bar Bender. Our entire product range is widely acclaimed among the clients for its sturdiness and excellent quality. We are associated with certified vendors of the industry, who fabricate the entire product range utilizing advanced technologies and advanced machines.

Core Drilling Machine

Core Drilling Machine

We are one of the well-known manufacturers of top-notch range of core drilling machine. Made from unique quality raw materials, our collection is tested on well-defined parameters to ensure high functionality and longer working life. This range of drilling machine is audited on well-defined parameters, to offer an error free to customers.

WALIA Core Driller Model PP-100 (D): Core Drilling Machine Powered by 5 h.p. Diesel Air-Cooled Engine, Heavy-Duty Helical Gear Box, 100mm Dia X 200mm Long Diamond Tipped Barrel and Water Tank, Mounted on a Trolley, Wheels for Transportation. Vertical Movements on Two Pillars to Adjust the Depth, Water Spraying Arrangement for Cooling the Diamond Bits, suitable for taking core of 100 mm Dia X 200 mm long.

To,Walia International Machines Corporation

Promote Your Business with IndiaMART
Enter Your Website URL
RELATED COMPANIES