Sign in
Waltar Enterprises
Fort, Mumbai, Maharashtra

Construction Fibres

We offer our clients superior quality Construction Fibres that are used to provide reinforcement to the concrete structures. Since ages, some or the other form of reinforcement fibers are used in the construction of buildings and monuments. These fibers protect the building from collapsing during natural calamities and other damage. Our organization manufactures superior quality high strength synthetic fibers that are marketed under the brand name of Cetex.

Why Use Construction Fibre

Construction fibers are manufactured using high quality virgin polypropylene that are hydrophobic in nature and do not absorb water. These fibers are further, non corrosive, which enhances the strength of the structure. Cetex polypropylene fibers are resistant to alkalis, chlorides and other chemicals while being less conductive to heat. Use of polypropylene fibers do not interfere with the water demands of concrete and facilitates the hydration process. When added, these fibers help the concrete in setting faster. Polypropylene is one of the lightest synthetic polymers, as it is 52% lighter than polyester and 26% lighter than nylon and acrylic, which makes them a perfect reinforcement. The triangular cross section of the Cetex fibers has 29% more surface area than circular fibers, which is also a reason for these being better reinforcements. Our manufactured construction fibers are easy to apply, mix & disperse and are cost effective as well.

We offer our clients superior quality Construction Fibres that are used to provide reinforcement to the concrete structures. Since ages, some or the other form of reinforcement fibers are used in the construction of buildings and monuments. These fibers protect the building from collapsing during natural calamities and other damage. Our organization manufactures superior quality high strength synthetic fibers that are marketed under the brand name of Cetex.

...

Read more

Cetex CPP06 - Microfibre

Approx Price: Rs 200 / Kilogram(s)

 

We offer our clients high quality polypropylene microfibers that are used for providing finishing to the plaster on walls. These microfibers come in a cut length of 6 mm and are easy to apply. The Cetex CPP06 - Microfibres are securely dispersed for hand mixing mortar to obtain a fine polish on the surface. We offer the Cetex Cpp06 microfibers

 

 

We offer our clients high quality polypropylene microfibers that are used for providing finishing to the plaster on walls. These microfibers come in a cut length of 6 mm and are easy to apply. The Cetex CPP06 - Microfibres are

...

Read more

Yes! I am Interested

Cetex CPP12 - Microfibre

Approx Price: Rs 200 / Kilogram(s)

Clients can avail from us Cetex CPP12 - Microfibres of cut length 12 mm used for thick and viscous mortar mix. These microfibers are suitable for application where the mortar thickness is 10 mm or more. During the initial plaster coat, these polypropylene microfibers impart water proofing to the structure. Adding these microfibers also reinforces the concrete in the cases where manual mixing is done.

Clients can avail from us Cetex CPP12 - Microfibres of cut length 12 mm used for thick and viscous mortar mix. These microfibers are suitable for application where the mortar thickness is 10 mm or more. During the initial plaster coat, these

...

Read more

Yes! I am Interested

Graded Macrofiber for Concrete

Approx Price: Rs 200 / Kilogram

We offer our clients graded polypropylene fibers that are used for all types of construction and in structural works. These Cetex CPPST - Macrofibres are used to replace steel in concrete for the purpose of reinforcement, particularly in the floor and precast area. The CETEX CPPST is a blend of CPP24, CP40 and CPP55. It can also be customized as per the nature of application. CPP40 has a longer cut length, which gives better anchorage and reinforcement and CP24 helps increasing the number of fibers in a dosage resulting in less crack formation. CETEX CPPST macrofibers are ideal for concrete structures that are supposed to bear heavy loads.

Additional Information:
  • Item Code: Cetex-CPPST
  • Minimum Order Quantity: 10.0 Kilogram
  • Port of Dispatch: MUMBAI

We offer our clients graded polypropylene fibers that are used for all types of construction and in structural works. These Cetex CPPST - Macrofibres are used to replace steel in concrete for the purpose of reinforcement, particularly in the

...

Read more

Yes! I am Interested

Cetex CPP55 - Macrofibre

Approx Price: Rs 200 / Kilogram(s)

The Cetex CPP55 - Macrofibres we offer to the construction industry are manufactured using high quality polypropylene. Their standard cut length ranges from 53 to 57 mm, as longer length ensures better reinforcement. These microfibers are used to improve the strength of the concrete structures that bear heavy loads. The CPP55 type of microfibers is stronger than the others and is used in large buildings and structures.

The Cetex CPP55 - Macrofibres we offer to the construction industry are manufactured using high quality polypropylene. Their standard cut length ranges from 53 to 57 mm, as longer length ensures better reinforcement. These microfibers are used to

...

Read more

Yes! I am Interested

Cetex CPP40 - Macrofibre

Approx Price: Rs 200 / Kilogram(s)

Manufactured based on the industry set standards, our Cetex CPP40 - Macrofibres are specifically used for medium load bearing concrete structures. The standard cut length of these fibers lies between 38 and 42 mm and is manufactured using quality tested polypropylene. Long cut length of these macro fibers ensure greater reinforcements and increased strength of the concrete structure. These macro fibers are easy to mix and harden the concrete quickly making it firm and stable.

Manufactured based on the industry set standards, our Cetex CPP40 - Macrofibres are specifically used for medium load bearing concrete structures. The standard cut length of these fibers lies between 38 and 42 mm and is manufactured using quality

...

Read more

Yes! I am Interested

Construction PP Fibres

Approx Price: Rs 200 / Kilogram(s)

These are polypropylene fibres of with 6 mm cut length. These micro fibers prevent crack formation and provide reinforcement. These fibres are mainly used in plasters for finishing coat or ornamental castings for crack prevention as well as additional reinforcement. Suitable care has been taken to insure dispersion of fibres for hand mixing of mortar.

 
DOSAGE

Dosage :- 600 grams / Cu. Mtr. (minimum).  The mentioned dosage is just a guideline. It is recommended to optimise the dosage depending on the requirement.


DIRECTION OF USE

For site mixing :- Add fibre in the drum after adding some water, which is added to clean the drum after each batch. Then add chips/sand/cement/water in the concrete mixer and continue normal operation.

For Manual Mixing:- The fiber is dosed in a bucket half filled with water. The water in stirred vigorously, which disperses the fiber. The water and fiber mixture is sprinkled over the other cementitious mix.

For dosing in Ready Mix Truck :- Add fibres in the rotating drum and allow extra revolutions of drum in maximum RPM possible.

 

SPECIFICATION

 Material                     :       100% virgin PP

Length                        :       6.0 /- .25 mm

Diameter                    :       24 micron (approx.)

Aspect ratio                :       250 (approx.)

Melt Point                   :       162 O

Specific Gravity           :       0.91

Thermal & Electric       :       Low

Conductivity

Alkali Resistance         :       100% Alkali Proof 

Acid & Salt Resistance  :       High

Additional Information:
  • Item Code: CETEX-CPP06

These are polypropylene fibres of with 6 mm cut length. These micro fibers prevent crack formation and provide reinforcement. These fibres are mainly used in plasters for finishing coat or ornamental castings for crack prevention as well as

...

Read more

Yes! I am Interested

Construction Polypropylene Fibers

Approx Price: Rs 200 / Kilogram(s)

These are Polypropylene (PP) fibers of 12 mm length. These micro fibers prevent crack formation and provide reinforcement. They are mainly used in mortar where thickness of plaster is 10 mm or more. They are suitable for waterproofing or repair of the structure. They are also used in concrete, where mixing is manual. Suitable care has been taken to insure dispersion of fibres. It conforms to ASTM C 1116/C 1116M - 06 4.1.3 Type III & BS EN 14889-2: 2006.


DOSAGE
Minimum Dosage:- For concrete- 600gm/m3 and for mortar– 900gm/ m3. For Fire Protection of Concrete:- 1.0 Kg/m3 (min.). Results improve with higher dosage of fiber. Kindly optimize the dosage depending on the requirement.


HOW TO USE?

For Machine mixing:- Small quantity of water is dosed in empty drum to clean the drum after each batch. Add fibre in the rotating drum. Then add chips/sand/cement/water in the concrete mixer and continue normal operation.

For Manual Mixing:- The fibers are dosed in a bucket half filled with water. The water in stirred vigorously, which disperses the fiber. The water and fiber mixture is spread over the other cementitious mix.

For dosing in Ready Mix Truck:- Add fibres in small lots in the rotating drum. After dosing is complete allow extra 20-30 revolutions of drum at maximum RPM.


SPECIFICATION

Material : 100% virgin Polypropylene (PP)

Length : 12.0 /- 0.25 mm

Diameter : 24 micron (approx.)

Aspect ratio : 500 (approx.)

Melt Point : 162 OC

Specific Gravity : 0.91

Thermal & Electric : Low

Conductivity

Alkali Resistance : 100% Alkali Proof

Acid & Salt Resistance : High

Additional Information:
  • Item Code: CETEX-CPP12

These are Polypropylene (PP) fibers of 12 mm length. These micro fibers prevent crack formation and provide reinforcement. They are mainly used in mortar where thickness of plaster is 10 mm or more. They are suitable for waterproofing or repair

...

Read more

Yes! I am Interested

Pp Construction Fibers

Approx Price: Rs 200 / Kilogram(s)

These are Polypropylene (PP) synthetic fibers of 24 mm length. These micro fibers are used in concrete mixing machines. It prevents crack formation and provides reinforcement. Maximum size of aggregate in normal concrete is 19mm (approx.). Being longer than maximum size of aggregate, each and every strand of fiber is effective. They are also used to protect damage of concrete structure and prevent spalling in case of fire. Suitable care has been taken to insure dispersion of fibres. It conform to ASTM C 1116/C 1116M - 06 4.1.3 Type III & BS EN 14889-2: 2006

DOSAGE

For crack prevention- 600gm/m3(min.); Recommended Dosage:- 900 gm/m3;

As secondary reinforcement – 900 – 1200 gm/m3 ;

For Fire Protection of Concrete:- 1.0 Kg/m3 (min.)

As primary reinforcement (for concrete floors/precast) – above 1000gm/m3. Results improve with higher dosage of fiber. Kindly optimize the dosage depending on the requirement.

HOW TO USE?

For Machine mixing:- Small quantity of water is dosed in empty drum to clean the drum after each batch. Add fibre in the rotating drum. Then add chips/sand/cement/water in the concrete mixer and continue normal operation.

For dosing in Ready Mix Truck:- Add fibres in small lots in the rotating drum. After dosing is complete allow extra 20-30 revolutions of drum at maximum RPM.

SPECIFICATION 

Material                     :       100% virgin Polypropylene (PP)

Length                       :       24.0 /- 0.25 mm

Diameter                   :       28 micron (approx.)

Aspect ratio               :       860 (approx.)

Melt Point                  :       162 OC

Specific Gravity          :       0.91

Thermal & Electric      :       Low

Conductivity

Alkali Resistance        :       100% Alkali Proof

Acid & Salt Resistance :       High                                        

Additional Information:
  • Item Code: CETEX-CPP24

These are Polypropylene (PP) synthetic fibers of 24 mm length. These micro fibers are used in concrete mixing machines. It prevents crack formation and provides reinforcement. Maximum size of aggregate in normal concrete is 19mm (approx.). Being

...

Read more

Yes! I am Interested

PP Construction Macro fibres

Approx Price: Rs 220 / Kilogram(s)

CPP40 is PP construction macro fibres specially made only for concrete application. The long length of fibre holds together different components of concrete together, thereby providing better reinforcement and increase in strength of concrete. It has been used in floorings, roads, slabs and other load bearing structure. A special treatment is done on surface of fibres for better dispersion in concrete mix.

DOSAGE

For Concrete :- 600 grams / Cu. Mtr. (minimum). The dosage, mentioned is just a guideline. It is recommended to optimise the dosage depending on the requirement.

DIRECTION OF USE

For site mixing :- Add fibre in the drum after adding some water, which is added to clean the drum after each batch. Then add chips/sand/cement/water in the concrete mixer and continue normal operation.

For dosing in Ready Mix Truck :- Add fibres in the rotating drum and allow extra revolutions of drum in maximum RPM possible.

SPECIFICATION
Material                               :               100% virgin PP

Length                                 :               40 /- 1.5 mm

Diametre (approx)                 :                40 micron (approx)

Aspect ratio (approx)             :               1000 (approx)

Melt Point                            :               162 OC

Specific Gravity                    :               0.91

Tenacity                              :               350-450 N/mm2

Young’s Modulus                   :               1.5-2.0 GPa

Thermal & Electric   :               Low
Conductivity    

Alkali Resistance                  :               100% Alkali Proof

Acid & Salt Resistance           :               High

Auto Ignition Temp               :               360 OC

Additional Information:
  • Item Code: CETEX-CPP40

CPP40 is PP construction macro fibres specially made only for concrete application. The long length of fibre holds together different components of concrete together, thereby providing better reinforcement and increase in strength of

...

Read more

Yes! I am Interested

Polypropylene Construction Fibers

Approx Price: Rs 200 / Kilogram(s)
POLYPROPYLENE FIBRES
CETEX offers a wide range of high strength synthetic polypropylene fibers which are treated with special chemicals for better dispersion:
  • CPP06 (Microfibre) (6mm cut length): They are used in plasters for finishing coat.

  • CPP12 (Microfibre) (12mm cut length):They are used in mortar mix where the thickness of the application of the mortar is 10 mm or more. They are suitable for initial coat of plaster, waterproofing of structure.

  • CPP24 (Macrofibre) (24-26mm cut length):They are used in concrete. The long length of fiber holds together different components of concrete together, thereby resulting in better reinforcement.

  • CPP40 (Macrofibre) (38-42mm cut length):They are used in heavy load bearing concrete. The longer length, results in better reinforcement, thereby improving the strength of the concrete. They can be used in place of steel fibres.
Additional Information:
  • Item Code: CETEX-CPP
POLYPROPYLENE FIBRES
CETEX offers a wide range of high strength synthetic polypropylene fibers which are treated with special chemicals for better dispersion:
  • CPP06 (Microfibre) (6mm cut length): They are used in

    ...

    Read more

Yes! I am Interested

Tell Us What You Are Looking For?

Reach Us

Gmap

Tarun Agrawal ( Director ) Waltar Enterprises DBS Heritage House, Prescott Road Opposite Cathedral Senior School, Fort, Fort, Mumbai - 400001, Maharashtra, India

+91-8048076331
Send SMS
Send E-MAIL