Suitable for welding of Aluminium & its alloys.
Equipment consist of:

AC Power Source
The most reliable & durable AC Power Source, Input Supply 2/3 Phase, 50 Hz with selection
of higher OCV for smooth arc. Step less, sound less, minimum maintenance. Air Cooled /
Oil Cooled.

TIG Welding Control Unit (TIGNITOR)
With gas control, H.F. Control, pre & post flow of gas for superior welding.
H.F. Cut off Timing: 0 to 10 Sec.
Gas post flow / pre flow: 0 to 10 Sec.
Input Supply: 220V, 1 Phase.

Water Cooling System
Consist of Water Tank with rust free inner coating fitted with Pump & Radiator mounted on wheels.
(Models with Chiller also available).

TIG Welding Torch
Water cooled, light in weight, heavy duty with 4 Mtr. / 8 Mtr. Long leeds complete with accessories.

Gas Regulator and Flow meter.
Models available: 300 Amps., 400 Amps., 600 Amps., 600 HD

Suitable for - Aluminium, Stainless Steel, Mild Steel, Copper, Brass, Titanium etc.
• Reactive power correction and MOSFET soft switch technology, high quality square wave power supply.
• Compact structure, stable welding current, steady and intensive arc, foot pedal controller interface for safe operation, reliable and durable, easy for maintenance.
• Strong capability of oxide film liquidates fantastic welder performance.
• Thermostatic protection, over-voltage protection, over-current protection, under-voltage protection.
• DC welder suitable for stainless steel, alloy steel, carbon steel, copper, titanium etc.
• AC welder suitable for aluminum and aluminum alloy.
• Complete accessories, welding torch, welding cable, earth clamp, welding holder.

Model Spec.	WSME-200
Power Supply Voltage	AC 220 ± 15% V/50-60Hz
Power supply capacity	4.2 KVA
Rated input current	16.8 A
Duty cycle	60.00%
Output current range	5-200 A
Cleaning proportion	1-100%
PWM range	10-99%
Up-slope time	0.1-15 S
Down-slope time	0.1-15 S
Efficiency	77.00%
Power factor	0.95
Weight	40 Kg
Dimensions (mm)	330 x 320 x 500

• Most Durable TIG Machine
• Suitable for welding of
• M.S., S.S. Copper Brass, Titanium & its alloys. Equipment consist of
• DC Power Source: 300 Amps, 400 Amps, 600 Amps.

TIG Welding Control Unit
• With gas control, H.F. Control, pre, & past flow of gas for superior welding.
• H.F. Cut off Timing : 0 to 10 Sec.
• Gas post flow / pre flow : 0 to 10 Sec.
• Input supply: 220V, 1 Phase
• With water failure safety device for safety of Torch.

Water Circulating System (Optional)
• Consist of: Water tank Fitted with Pump Mounted on wheels.
• Water Cooling System.

TIG Welding Torch
• Gas cooled / Water cooled 4 Mtr./ 8 mtr. Long Leeds.
• Gas Regulator and Flow meter.

Set of Accessories (Optional)

TECHNICAL DATA (Confirm to: IS-4559)

Model	TIG 300 Amps	TIG 400 Amps	TIG 600 Amps	TIG 600 HD Amps
Supply Voltage 3-phase, AC	380-440 V	380-440 V	380-440 V	380-440 V
Frequency	50 Hz	50 Hz	50 Hz	50 Hz
Insulation Class	H	H	H	H
At max Rated KVA	22	30	45	45
Open Circuit Voltage	75-80V	75-80V	75-80V	75-80V
Current Range	30-300A	30-400A	50-600A	50-600A
Current at 60% duty cycle	300 A	400 A	600 A	600A
Cooling	Forced Air	Forced Air	Forced Air	Forced Air

Soft switch technology, high efficiency, low power consumption. Automatic protection from over current, over heat, over/under voltage. TIG welding and MMA welding.
Up/down slope of welding current arc Pre & Post flow of gas. With automatic HF Control.
In TIG welding stich welding option is there. The build-in circuit guarantees a good arc-ignition and crater filling In MMA welding, can be used with all kinds of electrode of diameter below 5.0mm. In TIG welding can weld stainless steel, alloy steel, copper, titanium etc. Fine current Controlling.
The Arc Force knob can Increase the arc force and prevent the welding electrode struck to work pieces. Remote control current regulator - optional.
Suitable for welding of the stainless steel parts, pressure vessels and pipeline, provide more efficiency. A Voltage fluctuation of ± 20% is allowable.

TECHNICAL DATA

	WS7 - 315		WS7 - 400		WS7 - 500
Power or Source	3-Phase, 380 V 50Hz
Rated input capacity	8.0 KVA		10.5 KVA		13.5 KVA
Rated input current	18.6 A		26.3 A		36 A
Rated welding current	315 A		400 A		500 A
Welding current	315A 60% DE		400A 60% DE		500A 60% DE
	250A 100% DE		315A 100% DE		400A 100% DE
Adjust. Range of current Efficiency	-20 - 315 A-		20 - 400 A		20 - 500 A
No-load voltage MMA	83.00%
	40 - 50
	70 - 80 V
Current up/down n-slope time	0 - 10 S
Time for pre flow	1S
Time for post flow	5S
Dimensions (mm)	500 x 260 x 360	550 x 260 x 400		500 x 260 x 360
Weight (Kg.)	35	40		55
Air switch	32 A	32 A		40 A
Input cable (mm2)	3 x 4 + 1 x 2.5	3 x 4 + 1 x 2.5		3 x 6 + 1 x 4
Insulation class	F
Protection class	IP21

FOR ORBITAL WELDING

• The P-20 weld head has been designed to enable the welding of boiler tubes to tube sheets in heat exchangers.
• This head allows this task to be carried out using a precision Orbital Welding Power Supply, such as the ORBITMAT C range. This means that not only is the rotation of the torch is consistent and the delivery of the welding current is also kept constant and can be carried around the circumference of the tube.

Simple Operation
Extra smooth arc.
Automatic current stabilizing.
Minimum spatter.
Prevents Electrode Freezing.
Energy Saving.
Sturdy & proven construction to with stand extra ordinary welding environment.
Models available: 300 Amps, 400 Amps, 600 Amps.

Model	300 Amps	400 Amps	600 Amps
Supply voltage 3Phase, AC	380-440 V	380-440 V	380-440 V
Frequency	50 Hz	50 Hz	50 Hz
Insulation Class	H	H	H
At max Rated KVA	14	19	28.5
Open Circuit Voltage	75-85 V	75-85 V	75-85 V
Current Range	10-300 A	10-400 A	10-600 A
Current at 60% duty cycle	300 A	400 A	600 A
Cooling	Forced Air	Forced Air	Forced Air