The wesmec S-Lok twin ferrule fittings that we manufacture are fabricated using qualitative raw material such as SS 316 / 316 L, SS 304 / 3O4L, brass, monel, hastealloy, enconel  & carbon sleet. These ferrule fittings have gained huge repute in the market for their excellent gauge-ability, leak proof, torque free seal and have the ability to withstand pressure upto 6000 PSI.
 

We manufacture a wide gamut of precision engineered pipe fittings . Our entire range of pipe fittings is available in various configurations and specifications, dimensions and raw material used is relevant international standards gaugeability,leak proof seal and pressure upto 10000 PSI. Machined from SS 316 / 316 L,  SS 304 / 3O4L, brass, monel, hastealloy, enconel and teflon.

We offer precision engineered range of needle valves that are available in numerous orifice sizes and are manufactured using qualitative raw material. These needle valves are extensively used for flow throttling or shut – off and are used in sampling lines, hydraulic and pneumatic systems, gages, meters, test benches, panels. These needle valves are available in two types Screwed Bonnet Needle valves and Forged Body Needle valves.

Needle valves are incorporated with roll threaded and burnished spindles with non rotating tip, stellited/ ball tips optional and are availale in variety of end connections manufactured to Nace 01-075 (latest  version)pressure upto 15000 PSI.

Our entire range is acknowledged for the following features:

• Pure Teflon cylinder packing
• Packing adjustable and can be replaced without removing valve from system
• Precision machined barstock body
• Type 316 stainless stems in all valves
• Straight and angle cross patterns
• Universal mounting nut standard
• Twin ferrule end connections (1/8" TO 1")
• Female pipe connections (1/8" thru 1")
• 100% factory tested
• Rugged
• Compact forged body
• Low operating torque
• Color coded handles

We offer a wide range of ball valves that are manufactured using qualitative raw material. These ball valves are available in 2, 3, 4 and 5 way designs and also offer wide range of pressure capabilities.

The entire gamut is appreciated for the following salient features:

• Simple operation
• Visual indication of flow
• Full port for maximum flow
• Rodability
• Long cycle life
• Easy remote operation

Some of the technical specifications of our ball valves are as follows:

• Advanced low torque design: Having low operating torques our ball valves have a range of seat materials to give the ultimate in process environmental compatibility
• Stainless steel handle: One piece stamped 316 Stainless Steel handle provides positive feel, quarter turn rust free operation.
• Stop pin: A 316 Stainless Steel "dead stop" pin is held into the body by a machined anti- vibration spline.
• Seats: Our totally enclosed and renewable seats offer wide process compatibility whilst maintaining a positive sealing across the entire operating range. This high level of seat integrity allows both vacuum, and high pressure services from one valve.
• Ball: This precision machined component is super finished assuring low operating torques.
• Rodability: Positive 90^o travel combined with clear through bores ensures easy rodding.
• Process Threads: CNC super finished screw cut threads ease assembly with reduced risk of galling.
• Spindle: A one piece stem incorporates an anti - blowout shoulder which maintains seal integrity at all pressure. Twin anti-vibration lock nuts are standard.
• Body seals: Totally contained PTFE 'O' ring body seals give high body integrity, and additionally protect the body threads from process media.

Our range of manifolds valves are manufactured using qualitative raw material sourced from reliable vendors. These manifolds valve are acknowledged  for their qualitative features.

We offer different types of manifold valves such as:

Two valves manifolds :

• T type
• Flat type
• H type

Three valves manifolds :

• T type
• Flat type
• H type

Five valves manifolds :

• Flat type
• T type

Manufactured from SS 316, SS 316L, SS 304/ SS 304L, monel, hastelloy, enconel and carbon steel.

These manifolds valves are widely used with pressure gauges, transmitters, pressure switches & similar pressure measurement equipment.

Our range of non return valves has gained huge appreciation for their host of qualitative features. These are considered as the most reliable for gas and liquid. These non return valves can withstand pressure up to 6000 PSI.

Following are the technical specification of our non return valves:

• Connections: NPT / BSP, Tube end
• MOC: SS 316 / SS 316L, SS 304 / 304L, brass, monel, hastealloyC,  enconel & carbon steel.

The monoflange valves we manufacture have gained huge accolades in the industry and are available in single and double isolation valves.

These monoflange valves are manufactured using the following raw material:

• SS 316/316L, SS 304/304L
• Monel
• Hastealloy 'C

Where straight contact of the sensing elements with process media is not recommended, there seal condensate pots are used as part of instrumentation piping in all those applications.

These condensate pots serve as a unit for collecting deposits, dirt, moisture & other elements which may cause defect to the instrument or impair their precise operations. Fabricated in SS 316/ SS 316L, SS 304/ SS 304L, alloy steel and carbon steel.

The bar stock we manufacture are acknowledged for the ability to save with minimum leak paths. These bar stock distributors are fabricated using monel, hastealloys, SS 316 / 316L, SS 304 and others sourced from reliable vendors. Further these are available in NPT/BSP inlet outlet connections, pressures up to 6000 PSI. We also have the ability to customize our range as per the clients specification.

The air headers play the substitute of various unit valve assemblies, which operates from one source. These find extensive usage with an assortment of outlet take-off valves. Its inlet connection can either be flange or screwable. The drain valve is provided at the exit of the manifolds. Out manifolds can be supplied with bracket / U clamp for wall mounting. When air headers are used installation cost & space is saved considerabley:

Standard Specification for air headers:

M.O.C	:	SS316 / SS304 / CS
SIZE	:	11/2" /  2"  -  SCH40 / SCH80
INLET	:	ANSI B 16.5 , 150#   RF 1" NB Flange  /1" NPT (f) 3  Piece Union/ 1' NPT threaded.
DISTRIBUTION PORTS	:	Size   -¼" / ½" , Ports  -    6 / 8 / 10 / 12 / 16
OUTLET	:	½" NPT (F) , SS316 / SS304  BALL VALVE WITH ½" NPT(M) PLUG

• For CS air headers distribution ports are provided with ¼" Brass Needle valves
  
• For SS316 / 304 Air Headers distribution ports are provided with ¼" SS 316 / 304 Needle / Ball valves.
  
• For mounting purpose ' U ' clamp/ brackel will be provided.
  
• All NPT Threads will be as per ANSI B 2.1. & Socket Weld will be as per ANSI B 16.11.
  

Note: - Air headers can be fabricated as per clients requirement.

We manufacture a wide gamut of pressure snubbers that are manufactured using qualitative raw material procured from reliable vendors. These pressure snubbers are designed to protect pressure gauges against pressure perturbation serge and fluid hammber. moc: ss316/ ss 316l, ss 304/ ss 304l, monel, hastelloy"c" and brass.

The flanged thermowells we offer are manufactured with using qualitative raw material such as SS 316 / 316L,  SS 304/ 304L, monel, hastealloy"C", enconel and any machinable material. Threaded or flanged thermowells ends machined in straight, tapered or stepped design with good concenticity. hydro pneumatic test, radiography and ultrasonic test performed on flanged thermowells.