Laundry Equipment

p { margin-bottom: 0.21cm; }

“Whirler” make Front Loading - Washer cum Extractor Machine

 

• Whirler, Industrial Washing Machine Front-loading type, open pocket with built in low spin extracts to insure absolutely dry floor.

• Complete Stainless Steel (SS 304) inner & outer drum, front door

• Long lasting rust free operation.

• Automatic features like auto timed, auto reverse, auto temperature control etc.

• Ideally suited for Laundry Wash & Stone Wash.

 

 

Capacity	60 Kg	30 kg	15 kg
Cylinder size	Dia - 1100 x 750	Dia 900 x 500 mm	Dia 800x300 mm
Cylinder volume	720 ltr	375 ltr	150 ltr
Door opening	Dia – 500	Dia-400 mm	Dia – 400 mm
Water inlet size	2”	1.5’’	1”
Steam requirement	25 Kg / Hr	15 kg / Hr	10 kg /Hr
Electrical requirement	12 KW	6 KW	3 KW
Drain size	3”	2’’	1 ½”
Motor	15 HP	7.5 HP	5 HP
Wash Spin	36 rpm	36 rpm	36 rpm
Extract Spin	250 rpm	270 rpm	300 rpm
Overall dimensions (l x b x h)	1430x 1430 x 1845 mm	1220x1250x1730mm	950 X1050X1250
Net weight	950 kg	550 kg	300 kg

 

 

p { margin-bottom: 0.21cm; }

“Whirler” make Direct Drive Hydro extractor

• Material of construction: SS 304 Inner and Outer basket, door and control panel box.

• Safety features include automatic door lock with easy to operate door lock mechanism.

• Machine has continuous current breaking system to ensure simple and safe operation with automatic timer and emergency stop switches.

Capacity	15 kg	30 kg	50 kg
Basket size	510x330 mm	715x330 mm	900x400 mm
Basket RPM	960 rpm	960 rpm	870 rpm
Drain size	50 mm	50 mm	75 mm
Motor	2 HP	3 HP	5 HP
Overall dimensions (l x b x h)	760 x 1010 x 1100 mm	950 x 1150 x 1200 mm	1000 x 1250 x 1300 mm
Net weight	160 kg	380 kg	540 kg

p { margin-bottom: 0.21cm; }

“Whirler” make Flat Bed Press

• Designed for fine pressing of flat linen like Table covers, Pillow covers, Napkins, Kitchen linen , Staff uniforms.

• The suction feature, quality padding and Teflon lining on hot head Guarantee fine finishing / pressing.

• Machine is fully auto model with auto time, auto stop and stand of arm on pre-set time with motor, control panel, blower, FRL unit.

• Auto programmable with reset feature , Auto temperature control , Pneumatically operated

• Size of the head / bed: 750mm x 1500mm

• Steam / Electric heated model.

Head & Bed size	: 1500 x 750 mm
Suction Blower	: ½ hp
Steam Consumption	: 40 kg / hr
Steam Inlet size	: 0.5 inches BSP
Air Connection	: 100 lt / min
Dimensions with open head	: 1600 x 1580 x 1900 mm

Manual iron table with vacuum blower. Electric iron or Steam iron with steam generator

p { margin-bottom: 0.21cm; }

“Whirler” make Front Loading Dry Cleaning Machine

 

• LOADING DOOR: of large dimensions for facilitating loading and unloading, with a security device to protect the operator.

• BASKET: of geometric form and with proper dimensions in order to obtain the best cleaning results completely made of stainless steel.

• AIR TUNNEL: highly efficient, manufactures in one piece only which ensures solidity and very low turbulences in the air flow, allowing to considerably reduce the drying time.

• CONTROL PANEL: placed in he upper front part for easy access. It can be automatically or manually controlled, since in the automatic version there is a most modern computerized control system in order to process all kinds of garments and offer full operation safety. CONTROL PANEL: computer with control panel which accompanies all phases: all phases: operations are selected by means of illuminated “pushbuttons”.

• AIR FILTER: is made of two air filters (primary and secondary) planned for an easy use and a very simple maintenance.

• DISTILLATOR: built in stainless steel offers a high distillation capacity and with its continuous system permits to have always clean solvent. It is equipped with a large door, easy to clean. There is also available a large collector in order to clean distillatory easily. WATER SEPARATOR: is built in stainless steel and its main function is to separate solvent from water and avoid vapours flows in the atmosphere.

• SOLVENT TANK: available with two or three base tanks (according to model). It has a very low gravity centre which also permits to keep low the noise level. Inspection glasses are available on all tanks. Very low gravity centre and therefore low noise level. Inspection glasses are available on all tanks.

p { margin-bottom: 0.21cm; }

“Whirler” make Front Loading Sluice Machine

 

• Whirler, Industrial Sluice Machine Front-loading type, open pocket.

• No water spillage, absolutely dry floor.

• Complete Stainless Steel (SS 304) inner & outer drum, front door

• Long lasting rust free operation.

• Automatic features like auto timed, auto reverse, auto temperature control etc.

• The purpose of Sluicing m/c is to PREWASH the unhygienic blood-stained linens from Operation Theatres and maternity wards etc. which are not washed with other hospital linens. It is capable of pre-washing and extracting soiled articles containing blood, albumin, excreta, babies nappies etc. from used linen.

• It is imperative to remove all stains of blood, feces from used linen.

• With In built low spin extraction – 180 RPM

 

 

Capacity	20 kg
Cylinder size (Dia)	750 x 450 mm
Cylinder volume	200 ltr
Door opening	Dia-400 mm
Water inlet size	1’’
Motor	1 hp
Drain size	1 ½”
Overall dimensions (l x b x h)	1050 x 1100 x 1550mm
Net weight	275 kg

 

Vacuum Finishing Table

• Table TOP padded with imported silicon padding.

• Strong welded construction.

• Thermostatically controlled stainless steel table heater.

• Extended exhaust duct with lighting device.

• Powerful Suction through centrifugal blower activated by spring loaded full length foot pedal working in conjunction with sturdy micro switch.

• Silicon iron stand protects ironing and Teflon soles with stand up to 150^oC of temperature.

• Covered with silicon foam with heat proof cloth.

• Low maintenance.

• Table exact moisture and heat instantly ensuring crease free and dry garments.

• Available economical spares and services.

“Whirler” make Front Loading - Washer cum Extractor Machine Whirler, Industrial Washing Machine Front-loading type, open pocket with built in low spin extracts to insure absolutely dry floor. Complete Stainless Steel (SS 304) inner & outer drum, front door Long lasting rust free operation. Automatic features like auto timed, auto reverse, auto temperature control etc. Ideally suited for Laundry Wash & Stone Wash. Delta make VFD to achieve wash & spin rpm

“Whirler” make Automatic tumbler dryer

 

• Whirler Drying Tumbler, front-loading type, open pocket, having Stainless Steel inner basket.

• Long lasting rust free operation.

• Automatic features like auto timed, auto reverse, auto temperature control with solenoid valves etc.

• Highly energy efficient with doubles walled glass-wool insulation & lint screen.

• Two separate motors for drive & suction blower.

• Ideal solution to drying needs. Easy to operate & maintain.

• All the operation & maintenance is done from front & rear of the machine.

• Tumblers can be installed without any spacing in between. This reduce heat looses due to radiation.

• Unique designs without gearbox saves lot of space & energy.

• Especially design powerful suction blower & lint screen offers constant high airflow cycle.