Textile Processing Machines

We offer a wide array of HTHP soft flow fabric dyeing machines that are used in textile industries. This is used for dyeing woven & knitted fabrics with delicate and the sensitive structure.

Feature:

• Compact design, all welted parts are manufactured out of heavy duty stainless Steel AISI 316.

• Teflon coated basket for smooth movement of fabrics.

• It also prevents pilling and frictional damage to the fabric.

• SS steel cast circulation pump with mechanical seal.

• Frequency control AC drive for accurate speed variation of Inner reel for different types of fabrics.

• Comes with a high volume lint filter, which is required for cotton and heavy GSM fabric.

• Magnetic level indicator.

• Over flow type nozzle gives maximum water flow with low pressure.

• Low Liquor ratio: 1:5 to 6. (It depends upon type of dry fabric weight)

• Maximum working temperature: 143 degree Celsius.

• Maximum working pressure: 3.5 kg/cm2

• Highly efficient heat exchanger to ensure quick heating & cooling.

• Fully automatic version with advance microprocessor control.

• Fill, drain and overflow valves are automatic.

• Extra service tank with starrier for salt for excellent dyeing results.

• Pre-heating water storage tank reduce process time.

• Inverted drive-on main pump.

For more details please refer the pdf. file

Semi Automatic High Temperature High Pressure “U” Shape Jet Dyeing Machine

1. Maximum Working Temperature : 140 Centigrade

2. Maximum Working Pressure : 3.5 Kg / Cm2

3. Liquor Ratio: 1 : 4 to 5.

4. Pump Motor: 2 H.P. –2800 RPM

5. Outside Reel Motor : 0.5 H.P. –1440 RPM

6. Maximum Fabric Speed: 300 Meters / Minute.

7. Fast Heating & Cooling Rate:

8. Material: All the material which came direct contact to Fabric & Chemical is SS –316.

9. Main Associates:

• Dying Vessel: “U” Shape Dying Vessel is made from 1^st Quality material SS-316.Thickness 2.5 mm.

• Fabric Rotation System

• Heat Exchanger

• Main Pump with Crompton Make Electric Motor

• Suction Filter & Jali

• Color Tank

• Fabric Unloading System

• Fill / Drain / Overflow Valves

• Water Level Indicator

• Auto Control Panel

“WHIRLER” Three Point Suspended, Bottom Driven, Manual Top Discharge – Hydro Extractor

Open Winch

• Complete Tank made from SS 304 material.

• Support structure made from MS angles.

• Winch Dia. 20” and 9”.

• Direct heating coil

• Manual Drain Valve

• 2 HP, 1440 RPM, 3 Ph AC Motor

• Models:

1. 4 ft width

1. 5 ft width

1. 6 ft width

We offer a wide array of compactors that comes in felt type tubular model. This is used for finishing of tubular knitted fabrics in precision folds, with control of dimensional stability. It is suitable for finishing of 100% cotton knitted fabrics like jersey, interlock, plush, rib etc.

Features:

• High shrinkage value.

• Low residual re-entry value.

• Uniform and constant dimensional stability.

• Very soft to touch finish.

• Uniform precession folding perfectly aligned.

• Ability of working width 1300 mm.

• Working Speed: 30 Meter/min (max.)

• Total Connecting load: 10 HP.

• Dimension (L x W x H): 7200 x 2900 x 2300.

• Weight: 3000 Kg.

• 19 mm thick imported wool polyester based Felt stretcher Panel.

• For easy operation it is operated from both front and back side.

We offer a wide range of Balloon P adder that is a strong and sturdy processing machine used in textile industries. These are available in two different models, one with single squeezer for extraction and the other with double squeezer for chemical treatment.

Features:

• Main frames are fabricated and lined with stainless steel.

• The squeezer rollers are covered with special synthetic rubber.

• PU compound, to obtain uniform and high squeezing effect with low pressure.

• Consists of an air injection device and a few pairs of S.S. guide rollers which control the ballooning effect.

• Drive to the machine is provided with individual motors for in feed device.

• All drive motors are controlled by A.C. invertors to obtain tension-free working.

Quotation for Tubular Dryer

• Perforated SS Tube Dia. 150 mm x 3 mtr length

• Bottom SS Dish for collection of cloth at end. Dia. 750 mm

• Separate balanced blower for each tube.

• Advanced heat exchanger for steam/oil.

• 1 HP DC Motor with Panel Board for easy entry and delivery of the fabric.

• 2 HP blower Motor

• Robust structure with full cover.

• Model :

1. Two Pole

2. Four Pole