Wonder Systems India Pvt Ltd- Formerly Wonder International

Description

The 506, 507 and 508 series drives breaks new ground in value for money in DC motor control. Available in 3. 6 and 12A armature ratings the feature packed minimum footprint design is ideal for speed or torque control of permanent magnet or shunt wound DC motors from single-phase supply.

TECHNICAL SPECIFICATIONS

Switch Selectable Supply Power

• Single Phase 110-120Vac ±10%
• Single Phase 220-240Vac ±10%
• 50-60Hz ±5%

Ambient Temperature

• 0-40°C

TECHNICAL CHARACTERISTICS

Control Signals

• Zero speed, Drive Healthy, Speed Feedback

Motor protection

• Stall condition 15 seconds internal
• Electronic overload protection

Available field current

• 2A c.c.

Available frame sizes

• 3A (506) - 6A (507) - 12A (508)

Description

The Integrator series is a single family of both AC drives (690+) and DC drives (590+) that provides the benefits of common programming, set-up and communication across both technologies. The 590+ Integrator series highly advanced DC drive meets the demands of the most complex motor control applications.

Extensive application software (including winder control as standard) together with Function Block Programming and configurable I/O creates a total drive system in a single module.

Innovation

The 590Plus series introduced a new world, radical approach, in DC drive design: the philosophy of DRV. Each 590Plus DRV is internally integrated with all auxiliary power components.

Interfaces Supported:

• RS 232 connector for connecting with the PC.
• RS485 and RS 422 for creating a drive network.
• CAN field bus for managing setpoints, enabled/disabled options and point to point broadcast links without additional electronic cards.
• Optional field bus
• Profibus
• DeviceNet
• ModBus
• Ethernet
• CC-Link
• Control Net
• CANopen
• InterBus
• FIPIO
• Fieldbus Foundation
• Lanworks
• AS-Interface
• USB
• Bluetooth.

Hardware Configuration :

• 32 bit RISC processor with software and on board flash EPROM.
• On board alphanumeric  2 line keypad with hierarchical menu for parameterization, displaying variables and diagnosing alarms.
• 2 encoder inputs with zero reading, completely configurable with PUSH-PULL and LINE-DRIVER inputs (On board 5V and 24V power supply on card).
• LEDs, for the status of digital inputs and outputs, serial ports and CAN bus.
  
• 8 configurable digital inputs.
• 4 configurable digital outputs.
• 5 configurable 14 bit analog inputs.
• 2 configurable 12 bit analog outputs.

Description

Isolated control circuitry, a host of user facilities and extremely linear control loop makes the 512C ideal for single motor or multi-drive low power applications. Designed for use on single phase supplies, the 512C is suitable for controlling permanent magnet or wound field DC motors in speed or torque control.

TECHNICAL SPECIFICATIONS

Switch Selectable Supply Power

• Single Phase 110Vac ±10%
• Single Phase 220Vac ±10%
• Single Phase 380Vac ±10%
• Single Phase 480Vac ±10%
• 50-60Hz ±5%

Ambient Temperature

• 0-40°C

TECHNICAL CHARACTERISTICS

Motor Protection

• Stall condition 15 seconds internal
• Electronic Overload Protection

Overload

• 150% for 60 seconds

Available Field Current

• Up to 3A D.C.

Available Frame Sizes

• 4, 8, 16 and 32 ampere

Potentiometers

• Maximum speed
• Minimum speed
• Acceleration rate (1-40s)
• Deceleration rate (1-40s)
• Stability
• I.R Compensation

Description

The regenerative 514C DC drive offers full four-quadrant control of DC motors from single phase supplies. As such it is ideal for applications involving overhauling loads or where rapid and accurate deceleration is required.

Together with the non-regenerative 512C, they offer the perfect solution for lower power single motor and multi-drive applications.

TECHICAL SPECIFICATIONS

Switch Selectable Supply Power

• Single Phase 110Vac ±10%
• Single Phase 220Vac ±10%
• Single Phase 380Vac ±10%
• Single Phase 480Vac ±10%
• 50-60Hz ±5%

Ambient Temperature

• 0-40°C

SWITCH SELECTIONS

• Speed Calibration
• Tachometer/Armature Voltage Feedback Select
• At zero speed
• Output current bipolar/unipolar
• Ramp isolate
• Stall logic On/Off
• Current reference input/output
• Over-current trip
• Set-point comparator